Product Description
Toyota 4Runner 1996-2002 Gas Door Cover in Polished 304 Stainless (GC22178)
GC22178 puts a mirror-polished face on the fuel door of the 1996-2002 Toyota 4Runner 4-door SUV. It's a single US-made piece of 304 stainless steel, 26 gauge, sized for the 4Runner's door. You fix it to the 4Runner's door with 3M automotive-grade acrylic foam tape.
You must have the gas door
It's not a replacement cap and not a replacement part. You MUST have the existing gas door to install this piece. On an SUV of this age, check that the door is still there, opens and closes properly, and sits flush.
Fitment
Toyota 4Runner, 1996-2002, 4-door SUV. Seven model years, one row on the Fitment tab.
Rocker kit with a molding condition
One cross-listed part comes with a condition worth reading: TH96178, a six-piece upper rocker kit at 4.25 inches, spanning from the bottom of the molding down to the specified width. Its fitment is marked "NO Moldings," while its own note talks about the bottom of the molding. Those two statements seem to conflict, and we've flagged it. If you're considering that kit, call before ordering so we can confirm it matches your 4Runner's sides.
Handles and pillars
DH22178 is a four-piece door handle accent set. Pillar trim comes as PP22177 (four pieces) and PP22178 (six); QAA doesn't say what the two additional pieces cover, so the photos are the best comparison.
What holds it on
On the 1996-2002 4Runner, the trim goes over the existing gas door surface with no screws and no drilling. According to QAA, the tape holds for a lifetime and won't damage the Toyota's surface.
Paint after two decades
The adhesive grips the paint, not the metal underneath. On a 4Runner from these years, inspect the fuel door for sun fade, chipped edges or lifted clear coat. Address any of that before installing. A sound surface is the foundation for a good bond.
Cleaning and fitting
Soap and water first, then a rinse. A degreaser wipe takes off old wax and road film. Once the door face is dry, close the door and hold the trim against it with the liner still on. Slide it until the paint showing around the edge is even, and use painter's tape on the body as a marker. Peel the liner off, set the trim on the mark, and press down hard over the whole face. Press once more a minute later. Then swing the door open to be sure the edge clears. More detail is on the Installation tab.
Why start with the fuel door
It's the smallest job in the 4Runner lineup above: one flat piece, nothing else to line up, done in minutes. It's a good way to see how polished stainless looks against your paint color before you take on handles, pillars, or the rocker kit.
Conditions
Mild temperature, dry day, and no rain or washing overnight.
Care
Soft cloth, mild soap. Wipe off fuel drips.
Order check
1996-2002 4Runner, four doors, original fuel door working.
Questions
4Runner questions about GC22178 go to 877-752-3811; the UPC is under Specs.
GC22178 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | GC22178 |
| UPC | 691821361663 |
| Part type | Gas Door Cover Trim |
| Pieces in kit | 1 |
| Material | Polished 26-gauge 304 stainless steel |
| Finish | Polished to a mirror shine |
| Mounting | 3M automotive-grade acrylic foam tape; installs directly over the existing surface |
| Origin | Made in the USA |
| Fits | 1996-2002 Toyota 4Runner |
| Not included | This is NOT a replacement gas cap or door; your existing gas door is required |
Fitment: GC22178
| Vehicle | Years | Body style |
|---|---|---|
| Toyota 4Runner | 1996-2002 | 4-door, SUV |
Check your vehicle against every column here: year range, model, and body style all have to match. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Other QAA trim cataloged for the 1996-2002 Toyota 4Runner
- DH22178: 4-piece Door Handle Accent Trim
- PP22177: 4-piece Pillar Post Trim
- PP22178: 6-piece Pillar Post Trim
- TH96178: 6-piece Rocker Panel Trim, Upper Kit
Check the body style on each listing; some kits are specific to one body style.
Installation tips: Gas Door Cover Trim
- Confirm your vehicle still has its original gas door. This trim mounts over it and does not replace it.
- Unpack the piece and hold it in position to confirm the fit before mounting it.
- Each piece mounts with 3M automotive-grade acrylic foam tape, so clean and dry the mounting surface first; the tape needs paint or trim free of dirt and wax.
- Align the piece and press it firmly into place directly over the existing surface, working along its full length so the tape bonds evenly.
- Step back and check alignment before pressing along the full length of the piece.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: GC22178 Gas Door Cover Trim
Is GC22178 a replacement gas cap?
No. It is not a replacement cap or part. You must have the existing gas door to install this piece.
Which 4Runner years fit?
The 1996-2002 Toyota 4Runner 4-door SUV.
What's it made of?
Polished 304 stainless steel, 26 gauge, made in the USA.
Does it require drilling?
No. It installs directly over the existing surface with 3M automotive-grade acrylic foam tape.
How long does the tape last?
QAA states the tape will hold for a lifetime without causing any damage to the surface of the vehicle.
