Product Description
Ford Fusion 2013-2020 Sedan Gas Door Trim with Crease Contour (GC53390)
GC53390 is shaped, not flat. Its catalog note says "With crease contour," so the stainless has a formed crease rather than a simple plate profile; the photos show how it runs. It's listed for the Ford Fusion 4-door sedan from 2013 through 2020, eight model years on a single Fitment row.
On the 2013-2020 Fusion, the part is one polished 304 stainless piece, 26 gauge, made in the USA, that goes on with 3M automotive-grade acrylic foam tape. It is not a replacement cap or replacement part; the Ford's own gas door must be in place, since the trim overlays it.
Fusion owners shopping for pillar trim will find six described sets on this sheet, organized around the keyless entry touch pad and piece count. With the touch pad: PP53390 (four pieces) and PP53392 (twelve pieces). Without the touch pad: PP53393 (four pieces) and PP53395 (twelve pieces). The two six-piece sets, PP53391 and PP53394, are both noted "Sheer three sides," and their notes say nothing about the touch pad, so the catalog doesn't tell us how they differ; compare photos or call. Whether your Fusion has the keypad decides between most of these, so check that first.
There's also MC53390, a two-piece mirror cover set that does not include a cut-out for the turn signal. If your mirrors have signal lights in the housing, call before ordering it. TH53390, TH53391 and WQ53390 are cross-listed by number only.
Because GC53390 has a crease, it has one correct orientation, and the dry fit matters more than with a flat piece. Study the photos, then hold the trim on the closed door with the liner still on and adjust it until it matches the photos and an even line of paint shows around its edge. If it won't seem to sit right, stop and call before peeling the liner, since repositioning after the tape touches is difficult.
Mounting needs no drilling; the trim installs directly over the existing surface. QAA states the tape will hold for a lifetime without causing any damage to the surface of the vehicle. Good paint is essential, so repair chalky or peeling clear coat, chips and bubbles on the door before starting, and confirm it closes flush. Wash, rinse, dry and degrease the face; mark the dry-fit position with painter's tape; peel and place; then press firmly over the whole trim, working carefully along the crease so the tape seats fully. Press once more after a minute and open the door slowly to check it clears. The Installation tab gives more detail.
Polished 304 stainless reflects light brightly, and the crease gives that reflection some depth. At 26 gauge, the sheet stays thin. Install on a mild, dry day and let the tape set overnight; afterward, mild soap, a soft cloth and a wipe after fueling keep it clean.
Questions on the Fusion pillar sets or this piece? Ring Quality Automotive Trims at 877-752-3811 with GC53390; the UPC is under Specs.
GC53390 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | GC53390 |
| UPC | 691821605071 |
| Part type | Gas Door Cover Trim |
| Pieces in kit | 1 |
| Material | Polished 26-gauge 304 stainless steel |
| Finish | Polished to a mirror shine |
| Coverage / notes | With crease contour |
| Mounting | 3M automotive-grade acrylic foam tape; installs directly over the existing surface |
| Origin | Made in the USA |
| Fits | 2013-2020 Ford Fusion |
| Not included | This is NOT a replacement gas cap or door; your existing gas door is required |
Fitment: GC53390
| Vehicle | Years | Body style |
|---|---|---|
| Ford Fusion | 2013-2020 | 4-door, Sedan |
Match the year, model, and body style in this table to your vehicle before ordering. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Other QAA trim cataloged for the 2013-2020 Ford Fusion
- MC53390: 2-piece Mirror Cover Set
- PP53390: 4-piece Pillar Post Trim
- PP53391: 6-piece Pillar Post Trim
- PP53392: 12-piece Pillar Post Trim
- PP53393: 4-piece Pillar Post Trim
- PP53394: 6-piece Pillar Post Trim
- PP53395: 12-piece Pillar Post Trim
- TH53390: 8-piece Rocker Panel Trim, Lower Kit
Check the body style on each listing; some kits are specific to one body style.
Installation tips: Gas Door Cover Trim
- Confirm your vehicle still has its original gas door. This trim mounts over it and does not replace it.
- Unpack the piece and hold it in position to confirm the fit before mounting it.
- Each piece mounts with 3M automotive-grade acrylic foam tape, so clean and dry the mounting surface first; the tape needs paint or trim free of dirt and wax.
- Align the piece and press it firmly into place directly over the existing surface, working along its full length so the tape bonds evenly.
- Step back and check alignment before pressing along the full length of the piece.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: GC53390 Gas Door Cover Trim
Is GC53390 a replacement gas door?
No. It is not a replacement cap or replacement part. You must have the existing gas door to install this piece.
Is it flat?
No. The catalog notes it has a crease contour. Check the photos for its shape.
Which Fusion years fit?
The 2013-2020 Ford Fusion 4-door sedan.
What is it made of?
Polished 304 stainless steel, 26 gauge, made in the USA.
Does it need drilling?
No. It installs directly over the existing surface with 3M automotive-grade acrylic foam tape.
How long does the tape hold?
QAA states the tape will hold for a lifetime without causing any damage to the surface of the vehicle.
