Product Description
Chevrolet Cruze Hatchback 2017-2019 Polished Gas Door Trim (GC57800)
GC57800 is listed for the Chevrolet Cruze 4-door hatchback, model years 2017, 2018 and 2019. That single row is the whole Fitment tab, so a Cruze with a different body, or from a different year, isn't covered here. QAA makes the Cruze trim in the USA from one polished piece of 26-gauge 304 stainless. On the Cruze, the overlay is bonded with 3M automotive-grade acrylic foam tape.
It's a trim piece only, not a replacement cap or replacement part for the Cruze. The 2017-2019 Cruze hatchback must keep its own fuel door, since the stainless bonds to its face.
What stands out on this sheet is the pillar ladder: seven pillar post sets for the same hatchback, each covering more, with notes on what's included.
- PP57800, four pieces, and PP57801, six pieces, with no notes.
- PP57802, eight pieces, includes two rear pillar pieces.
- PP57803, ten pieces, includes two rear pillar pieces and the rear triangle.
- PP57804, twelve pieces, has one front pillar piece on top of that.
- PP57805, fourteen pieces, includes two front and two rear pillar pieces plus the rear triangle.
- PP57806, sixteen pieces, includes two front and two rear pillar pieces and both the front and rear triangle pieces.
So the choice comes down to how far forward and back you want the stainless to go. QAA doesn't say what the six-piece set's additional pair covers, so compare photos for that one. AT57800, RD57800 and WQ57800 are also cross-listed, by number only.
The gas door trim is a simple counterpart to all that: one flat piece, independent of whichever pillar set you choose, and a few minutes' work. If you're torn between pillar sets, fitting the gas door piece first lets you see how much polished stainless you like on the car. Someone who finds it subtle may lean toward a larger set; someone who finds it bold may prefer the four-piece set.
GC57800 installs directly over the existing surface, with no drilling. QAA states the tape will hold for a lifetime without causing any damage to the surface of the vehicle. Check the door's paint before you start, since that's what the tape grips; repair any peeling or faded clear coat, chips and bubbles. The door should close flush.
Clean the door with soap and water, rinse, dry, and degrease. With the liner on, set the trim on the closed door and adjust it until the paint margin is even, then mark the spot with painter's tape. Peel the liner, align, and press firmly across the face; press again after a minute. Open the door slowly to confirm it clears. The Installation tab has more.
Polished 304 stainless reflects light brightly, and 26 gauge keeps it thin. Install on a mild, dry day and let the tape set overnight. Clean with mild soap and a soft cloth, and wipe away fuel drips.
For anything about the Cruze trim or the other linked pieces, call Quality Automotive Trims on 877-752-3811 with GC57800 to hand; the UPC is on the Specs tab.
GC57800 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | GC57800 |
| UPC | 691821281886 |
| Part type | Gas Door Cover Trim |
| Pieces in kit | 1 |
| Material | Polished 26-gauge 304 stainless steel |
| Finish | Polished to a mirror shine |
| Mounting | 3M automotive-grade acrylic foam tape; installs directly over the existing surface |
| Origin | Made in the USA |
| Fits | 2017-2019 Chevrolet Cruze |
| Not included | This is NOT a replacement gas cap or door; your existing gas door is required |
Fitment: GC57800
| Vehicle | Years | Body style |
|---|---|---|
| Chevrolet Cruze | 2017-2019 | 4-door, Hatchback |
Check your vehicle against every column here: year range, model, and body style all have to match. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Other QAA trim cataloged for the 2017-2019 Chevrolet Cruze
- PP57800: 4-piece Pillar Post Trim
- PP57801: 6-piece Pillar Post Trim
- PP57802: 8-piece Pillar Post Trim
- PP57803: 10-piece Pillar Post Trim
- PP57804: 12-piece Pillar Post Trim
- PP57805: 14-piece Pillar Post Trim
- PP57806: 16-piece Pillar Post Trim
- AT57800: 4-piece Body Side Molding Accent Trim
Check the body style on each listing; some kits are specific to one body style.
Installation tips: Gas Door Cover Trim
- Confirm your vehicle still has its original gas door. This trim mounts over it and does not replace it.
- Unpack the piece and hold it in position to confirm the fit before mounting it.
- Each piece mounts with 3M automotive-grade acrylic foam tape, so clean and dry the mounting surface first; the tape needs paint or trim free of dirt and wax.
- Align the piece and press it firmly into place directly over the existing surface, working along its full length so the tape bonds evenly.
- Step back and check alignment before pressing along the full length of the piece.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: GC57800 Gas Door Cover Trim
Is GC57800 a replacement gas door?
No. It is not a replacement cap or replacement part. You must have the existing gas door to install this piece.
Does it fit the Cruze sedan?
It is listed only for the 2017-2019 Chevrolet Cruze 4-door hatchback. Call 877-752-3811 about other body styles.
What is it made of?
Polished 304 stainless steel, 26 gauge, made in the USA.
Does it need drilling?
No. It installs directly over the existing surface with 3M automotive-grade acrylic foam tape.
How long does the tape hold?
QAA states the tape will hold for a lifetime without causing any damage to the surface of the vehicle.
