Product Description
Chevrolet Blazer 2019-2026 Polished Stainless Gas Door Trim (GC59140)
GC59140 is polished stainless trim made for the fuel door of the 2019-2026 Blazer 4-door SUV, a small detail you see at every fill-up. That's eight model years on a single Fitment row. The trim is one piece of 304 stainless steel, 26 gauge, made in the USA, and it ships with 3M automotive-grade acrylic foam tape.
Be aware that GC59140 is not a replacement cap and not a replacement part. You MUST have the existing gas door to install this piece. It's an overlay for the Blazer's own fuel door.
The Blazer has a healthy list of cross-listed trim. Three pillar post sets are described, PP59140 (four pieces), PP59141 (six) and PP59142 (eight); QAA doesn't explain the additional pieces, so the photos are the best guide. RW59140 is a two-piece rear window trim. At the back, LB59140 is a one-piece license bar that sits above the plate, and RB59140 a one-piece rear bumper trim accent. WQ59140 is a four-piece wheel well accent set at 1.25 inches. Five more, RD59140, LP59140, WP59140, WP59141 and WS59140, are listed by number only, so open those listings for their details.
If you'd like to dress up the Blazer in stages, the gas door piece is a low-effort way to start. It's a single flat overlay, and it shows you the polished finish on your own Blazer's paint before you decide between the pillar sets.
Attaching it takes no drilling, because GC59140 installs directly over the existing surface. QAA states the tape will hold for a lifetime without causing any damage to the surface of the vehicle. Since that bond is to the paint, examine the fuel door first. Repair any clear coat that's faded, peeling or blistered, along with chips around the edge, and make sure the door closes flush and latches.
To install it, clean the door with soap and water and rinse. Dry it fully, then degrease the face. Hold the trim on the closed door with the liner still attached and slide it until an even line of paint shows all around, then mark the spot with painter's tape. Peel the liner, place the trim to the marks, and press it firmly all over, then once more after a minute. Ease the door open to make sure it clears. The Installation tab spells out each step.
The polished 304 finish has a bright, reflective look, and the 26 gauge sheet keeps it slim against the door. Install on a mild, dry day and let the tape set overnight before rain or washing. Clean it with mild soap and a soft cloth, and wipe away fuel drips after filling.
Before ordering, check three things: the vehicle is a Blazer, its model year is 2019 or later through 2026, and the gas door is in place and undamaged. Questions? Call Quality Automotive Trims at 877-752-3811 and mention GC59140. The UPC is on the Specs tab, and prep steps are on the Installation tab.
GC59140 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | GC59140 |
| UPC | 691821574032 |
| Part type | Gas Door Cover Trim |
| Pieces in kit | 1 |
| Material | Polished 26-gauge 304 stainless steel |
| Finish | Polished to a mirror shine |
| Mounting | 3M automotive-grade acrylic foam tape; installs directly over the existing surface |
| Origin | Made in the USA |
| Fits | 2019-2026 Chevrolet Blazer |
| Not included | This is NOT a replacement gas cap or door; your existing gas door is required |
Fitment: GC59140
| Vehicle | Years | Body style |
|---|---|---|
| Chevrolet Blazer | 2019-2026 | 4-door, SUV |
Fitment is listed exactly as QAA catalogs it. Confirm the body style as well as the year and model. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Other QAA trim cataloged for the 2019-2026 Chevrolet Blazer
- PP59140: 4-piece Pillar Post Trim
- PP59141: 6-piece Pillar Post Trim
- PP59142: 8-piece Pillar Post Trim
- RW59140: 2-piece Rear Window Trim
- LB59140: 1-piece License Bar, Above plate accent Trim
- RB59140: 1-piece Rear Bumper Trim Accent
- WQ59140: 4-piece Wheel Well Accent Trim
- RD59140: 1-piece Rear Deck Accent
Check the body style on each listing; some kits are specific to one body style.
Installation tips: Gas Door Cover Trim
- Confirm your vehicle still has its original gas door. This trim mounts over it and does not replace it.
- Unpack the piece and hold it in position to confirm the fit before mounting it.
- Each piece mounts with 3M automotive-grade acrylic foam tape, so clean and dry the mounting surface first; the tape needs paint or trim free of dirt and wax.
- Align the piece and press it firmly into place directly over the existing surface, working along its full length so the tape bonds evenly.
- Step back and check alignment before pressing along the full length of the piece.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: GC59140 Gas Door Cover Trim
Is GC59140 a replacement gas door?
No. It is not a replacement cap or replacement part. You must have the existing gas door to install this piece.
Which Blazer years fit?
The 2019-2026 Chevrolet Blazer 4-door SUV.
What is it made of?
Polished 304 stainless steel, 26 gauge, made in the USA.
Does it need drilling?
No. It installs directly over the existing surface with 3M automotive-grade acrylic foam tape.
How long does the tape hold?
QAA states the tape will hold for a lifetime without causing any damage to the surface of the vehicle.
Which pillar sets are available?
PP59140 (four pieces), PP59141 (six) and PP59142 (eight).
