Product Description
Chevrolet Blazer 2019-2026 Polished Stainless License Bar (LB59140)
LB59140 covers eight model years of the Chevrolet Blazer 4-door SUV, 2019 through 2026, on a single fitment row. It's a one-piece polished stainless steel bar cataloged as License Bar, Above plate accent Trim, and it goes on the liftgate above the rear license plate.
The bar is made in the USA from 26-gauge 304 stainless steel, polished to a mirror finish. It mounts with 3M automotive-grade acrylic foam tape and installs directly over the existing surface; nothing is drilled or removed. QAA states the tape will hold for a lifetime without causing any damage to the surface of the vehicle.
Three things the listing doesn't say
Width: not given. Cutouts: no note about key access, a camera opening or a logo cutout. Trim exclusions: none listed, so the row covers the Blazer across all eight years. The first two are answered by the product photos, which show the bar's shape and position. Compare them with the area above your plate. If anything on your Blazer sits where the bar would go, call Quality Automotive Trims at 877-752-3811 with LB59140 before ordering.
Installing
Pick a dry day in the temperature range on the Installation tab. Wash and dry the area, then wipe with rubbing alcohol until a fresh cloth stays clean. Hold the bar in place with the liner on and step back to see it as others will. Center it with a tape measure, from each end to the plate edges, and check that it's level. Mark both ends with painter's tape. Peel, line up, and press firmly from the middle out. Remove the marks and press again. Close the liftgate gently for the first day.
Twelve related Blazer parts
PP59140, PP59141 and PP59142 are pillar post kits of four, six and eight pieces. GC59140 is a one-piece gas door cover trim. RW59140 is a two-piece rear window trim and RB59140 a one-piece rear bumper trim accent. WQ59140 is a four-piece wheel well accent at 1.25". RD59140, LP59140, WP59140, WP59141 and WS59140 are named by number only here; open those listings for details. Rear window trim, bumper accent and this bar all sit at the back, so compare their photos together if you're planning more than one. Check each listing for its finish.
Start small
If you're curious how polished stainless looks on your Blazer's paint color, a license bar is a contained way to find out. It's one piece in one spot. Hold it in place, liner on, in daylight, before deciding on anything larger.
Paint condition
Inspect the paint above the plate for chips or adhesive residue from a dealer badge. Clean residue off and fix flaking finish before the tape goes on.
Before ordering
Blazers of 2019 to 2026 are listed for LB59140. Eight years is a long span, so take a quick look at the photos even if your Blazer is near the middle of the range.
Care
Wash with mild soap and water and dry with a soft towel. Avoid abrasives. The Fitment and Specs tabs repeat the vehicle row and the UPC.
LB59140 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | LB59140 |
| UPC | 691821553266 |
| Part type | License Bar, Above plate accent Trim |
| Pieces in kit | 1 |
| Material | Polished 26-gauge 304 stainless steel |
| Finish | Polished to a mirror shine |
| Mounting | 3M automotive-grade acrylic foam tape; installs directly over the existing surface |
| Origin | Made in the USA |
| Fits | 2019-2026 Chevrolet Blazer |
Fitment: LB59140
| Vehicle | Years | Body style |
|---|---|---|
| Chevrolet Blazer | 2019-2026 | 4-door, SUV |
Match the year, model, and body style in this table to your vehicle before ordering. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Other QAA trim cataloged for the 2019-2026 Chevrolet Blazer
- PP59140: 4-piece Pillar Post Trim
- PP59141: 6-piece Pillar Post Trim
- PP59142: 8-piece Pillar Post Trim
- GC59140: 1-piece Gas Door Cover Trim
- RW59140: 2-piece Rear Window Trim
- RB59140: 1-piece Rear Bumper Trim Accent
- WQ59140: 4-piece Wheel Well Accent Trim
- RD59140: 1-piece Rear Deck Accent
Check the body style on each listing; some kits are specific to one body style.
Installation tips: License Bar, Above plate accent Trim
- Unpack the piece and hold it in position to confirm the fit before mounting it.
- Each piece mounts with 3M automotive-grade acrylic foam tape, so clean and dry the mounting surface first; the tape needs paint or trim free of dirt and wax.
- Align the piece and press it firmly into place directly over the existing surface, working along its full length so the tape bonds evenly.
- Step back and check alignment before pressing along the full length of the piece.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: LB59140 License Bar, Above plate accent Trim
Which Blazer years does LB59140 fit?
2019 through 2026, 4-door SUV.
How wide is it?
No width is listed. See the photos or call 877-752-3811.
Are there trim exclusions?
None are listed on the fitment row.
How does it attach?
3M automotive-grade acrylic foam tape, directly over the existing surface. QAA states the tape will hold for a lifetime without causing any damage to the surface of the vehicle.
How many pieces?
One.
