Product Description
2019-2026 Chevrolet Blazer Rear Bumper Trim, One Polished Stainless Piece (RB59140)
RB59140 is QAA's rear bumper trim for the Chevrolet Blazer 4-door SUV, covering every model year from 2019 through 2026. It is a single strip of 304 stainless steel with a mirror polish, made in the USA, and it attaches over the existing bumper with 3M tape.
Eight model years
2019, 2020, 2021, 2022, 2023, 2024, 2025, and 2026. If your Blazer is the 4-door SUV in that range, this is the rear bumper piece QAA lists for it.
Choosing a window package
The Blazer has two window packages, and the notes make the difference clear. WP59140 is an eighteen-piece package with upper trim, window sills, and pillar posts. WP59141 is a ten-piece package with upper trim and sills but no pillar posts. If you already have pillar trim or want a separate pillar kit, the smaller package makes sense; PP59140, PP59141, and PP59142 offer four, six, and eight pieces. WS59140 is a six-piece sill set on its own, face of sills only.
Around the back
- RD59140, a rear deck accent
- LB59140, a license bar above the plate
- LP59140, a license plate bezel
- RW59140, a two-piece rear window trim
- GC59140, a gas door cover
WQ59140, a four-piece wheel well accent at 1.25 inches, is the main side piece listed.
What it is
A strip of polished steel that bonds to the rear bumper cover. It is cosmetic and leaves the bumper untouched.
Material
26-gauge 304 stainless, mirror polished. No plating, so nothing to wear through.
How it attaches
3M automotive-grade acrylic foam tape, over the existing surface. QAA states the tape will hold for a lifetime without causing damage to the vehicle surface.
Late-model paint prep
If your Blazer has a paint sealant or ceramic coating, tape will not grip it well. Wash and dry the bumper, then clean the mounting area with a residue-free cleaner; if a coating is present, a detailer can clear a small strip for you.
Installing
Dry-fit with the liner on and compare it with the photos. Measure from both ends to the bumper corners, adjust until equal, and mark with masking tape. Choose a dry, mild day, peel the liner, and press firmly from the center out. Wait a few days before washing. The Installation tab has full steps.
Care
Mild soap and a soft cloth. Avoid abrasive pads on the mirror face.
Laying out the rear
With five other rear pieces linked, it helps to plan from the top down. Fit the rear window trim and deck accent first, then the license bar and bezel, and center this bumper trim last. Each one becomes a guide for the next, so the stack lines up when you stand behind the SUV.
Building the set over time
You can start with this bumper trim and fit the license bar, deck accent, or window package later; check each of those listings for its finish.
Part details
SKU RB59140, UPC 691821257294. Call Quality Automotive Trims at 877-752-3811 for help picking a window package.
RB59140 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | RB59140 |
| UPC | 691821257294 |
| Part type | Rear Bumper Trim Accent |
| Pieces in kit | 1 |
| Material | Polished 26-gauge 304 stainless steel |
| Finish | Polished to a mirror shine |
| Mounting | 3M automotive-grade acrylic foam tape; installs directly over the existing surface |
| Origin | Made in the USA |
| Fits | 2019-2026 Chevrolet Blazer |
Fitment: RB59140
| Vehicle | Years | Body style |
|---|---|---|
| Chevrolet Blazer | 2019-2026 | 4-door, SUV |
Match the year, model, and body style in this table to your vehicle before ordering. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Other QAA trim cataloged for the 2019-2026 Chevrolet Blazer
- PP59140: 4-piece Pillar Post Trim
- PP59141: 6-piece Pillar Post Trim
- PP59142: 8-piece Pillar Post Trim
- GC59140: 1-piece Gas Door Cover Trim
- RW59140: 2-piece Rear Window Trim
- LB59140: 1-piece License Bar, Above plate accent Trim
- WQ59140: 4-piece Wheel Well Accent Trim
- RD59140: 1-piece Rear Deck Accent
Check the body style on each listing; some kits are specific to one body style.
Installation tips: Rear Bumper Trim Accent
- Unpack the piece and hold it in position to confirm the fit before mounting it.
- Each piece mounts with 3M automotive-grade acrylic foam tape, so clean and dry the mounting surface first; the tape needs paint or trim free of dirt and wax.
- Align the piece and press it firmly into place directly over the existing surface, working along its full length so the tape bonds evenly.
- Step back and check alignment before pressing along the full length of the piece.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: RB59140 Rear Bumper Trim Accent
Which Blazer years does RB59140 fit?
The Chevrolet Blazer 4-door SUV, 2019 through 2026.
How many pieces?
One.
What is the difference between WP59140 and WP59141?
WP59140 has eighteen pieces including pillar posts; WP59141 has ten pieces with upper trim and sills but no pillar posts.
What rear trim pairs with it?
RD59140 rear deck accent, LB59140 license bar, LP59140 license plate bezel, RW59140 rear window trim, and GC59140 gas door cover.
How does it install?
With 3M automotive-grade acrylic foam tape over the existing surface.
