Product Description
Kia K5 Sedan 2021-2026 Rear Bumper Trim in Polished 304 Stainless (RB71805)
RB71805 is QAA's one-piece rear bumper trim for the Kia K5 4-door sedan from 2021 through 2026. It is mirror-polished 304 stainless steel, made in the USA, and it mounts with 3M tape over the bumper's existing finish.
Six model years
2021, 2022, 2023, 2024, 2025, and 2026, all for the 4-door sedan. No trim exclusions are listed, so the same part is cataloged for every K5 sedan in that range.
Rear trim for the K5
Three linked items finish the back of the sedan: RD71805, a rear deck accent one inch wide; LP71805, a license plate bezel; and GC71805, a gas door cover. The bumper and deck pieces together put two lines across the rear, one on the trunk lid and one on the bumper.
Side options and what the notes say
TH71805 is a four-piece rocker kit with a tapered width of 2.25 to 2.75 inches. Its note describes it as installing below the door, on the rocker, even though it is labeled a lower kit, so check its photos to see exactly where it sits. WQ71805 is a six-piece wheel well accent at 1.25 inches. WS71805 is a six-piece sill set covering the face of the sills only.
Pillar kits
PP71805, PP71806, and PP71807 come in four, six, and eight pieces. The catalog lists no coverage notes for them, so compare their photos to see what the further pieces cover.
What it is
Bright stainless trim bonded to the rear bumper cover. It is decorative, and the bumper is not altered.
Material
26-gauge 304 stainless, mirror polished. Since the shine is the metal itself, it cannot peel like plated trim.
How it mounts
On the K5, 3M automotive-grade acrylic foam tape holds the trim on the current bumper surface. According to QAA, the tape keeps its grip for a lifetime without damaging the Kia.
Clean surface first
Wash the bumper with car soap, dry it, and wipe the mounting area with a residue-free cleaner. Newer cars often have a fresh coat of wax or a sealant from detailing, so do a second wipe to be safe. Repair any chips under the trim line.
Installing it straight
Hold the trim in place with the liner on and compare it to the photos. Measure from each end to the bumper corners, adjust until they match, and run masking tape along the line. On a dry, mild day, peel the liner, set the trim on your marks, and press from the center out. Wait a few days before washing. The Installation tab gives the complete steps.
Care
Mild soap and a soft towel. No abrasive pads or gritty compounds. Drying the trim after each wash keeps water spots off the mirror finish.
Fitting more pieces later
You can start with this bumper trim and fit the deck accent or bezel later; check each linked K5 listing for its finish.
Part details
SKU RB71805, UPC 840251603533. Call Quality Automotive Trims at 877-752-3811 with any K5 fitment question.
RB71805 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | RB71805 |
| UPC | 840251603533 |
| Part type | Rear Bumper Trim Accent |
| Pieces in kit | 1 |
| Material | Polished 26-gauge 304 stainless steel |
| Finish | Polished to a mirror shine |
| Mounting | 3M automotive-grade acrylic foam tape; installs directly over the existing surface |
| Origin | Made in the USA |
| Fits | 2021-2026 Kia K5 |
Fitment: RB71805
| Vehicle | Years | Body style |
|---|---|---|
| Kia K5 | 2021-2026 | 4-door, Sedan |
Match the year, model, and body style in this table to your vehicle before ordering. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Other QAA trim cataloged for the 2021-2026 Kia K5
- PP71805: 4-piece Pillar Post Trim
- PP71806: 6-piece Pillar Post Trim
- PP71807: 8-piece Pillar Post Trim
- GC71805: 1-piece Gas Door Cover Trim
- RD71805: 1-piece Rear Deck Accent
- TH71805: 4-piece Rocker Panel Trim, Lower Kit
- WS71805: 6-piece Window Sill Trim Set
- WQ71805: 6-piece Wheel Well Accent Trim
Check the body style on each listing; some kits are specific to one body style.
Installation tips: Rear Bumper Trim Accent
- Unpack the piece and hold it in position to confirm the fit before mounting it.
- Each piece mounts with 3M automotive-grade acrylic foam tape, so clean and dry the mounting surface first; the tape needs paint or trim free of dirt and wax.
- Align the piece and press it firmly into place directly over the existing surface, working along its full length so the tape bonds evenly.
- Step back and check alignment before pressing along the full length of the piece.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: RB71805 Rear Bumper Trim Accent
Which Kia does RB71805 fit?
The Kia K5 4-door sedan, 2021 through 2026.
How many pieces?
One.
What rear trim pairs with it?
RD71805 rear deck accent, LP71805 license plate bezel, and GC71805 gas door cover.
Where does TH71805 install?
Its note says below the door, on the rocker, with a tapered width of 2.25 to 2.75 inches.
How does it install?
With 3M automotive-grade acrylic foam tape over the existing surface.
