Product Description
Chevrolet Blazer 2019-2026 Stainless License Plate Bezel (LP59140)
Eight model years of the Chevrolet Blazer 4-door SUV, 2019 through 2026, share one fitment row for LP59140, and that row has no exclusions or notes. The part is one stainless License Plate Bezel. Title and row agree, so if your Blazer falls in that span, you're looking at the bezel listed for it.
The first decision for most Blazer owners is whether to pair it with LB59140, a one-piece part the catalog names "License Bar, Above plate accent Trim." The name places it above the plate, while LP59140 frames the plate area. The catalog doesn't describe how the two meet, so treat them as a pair during planning: open both sets of photos, and if you order both, hold them on the SUV together before peeling anything. RB59140, a one-piece Rear Bumper Trim Accent, is also cataloged for the back of the Blazer and is worth including in that same check if it's on your list.
Beyond the rear pieces, the Blazer has three Pillar Post Trim kits, PP59140 with four pieces, PP59141 with six and PP59142 with eight, plus GC59140, a one-piece Gas Door Cover Trim, and RW59140, a two-piece Rear Window Trim. WQ59140, RD59140, WP59140, WP59141 and WS59140 are linked by number only, and this sheet doesn't carry their details. Each listing describes its own finish and mounting, so read those before mixing pieces.
The bezel is cut from 26-gauge 304 stainless steel and polished to a mirror finish in the USA. Because the shine is the steel itself, there's no plating to peel. The catalog gives no dimensions, so the product photos are the guide to its outline. Compare them with your plate area and note anything nearby that would need clearance.
It's held by 3M automotive-grade acrylic foam tape, directly over the existing surface, so the job involves no drilling. QAA states the tape will hold for a lifetime without causing any damage to the surface of the vehicle. Paint is the foundation of that bond. Repair chips or clear coat that's starting to lift around the plate before you begin.
For prep, take off any residue from old frames or dealer decals, wash with soap and water and let it dry fully. A final wipe with rubbing alcohol clears away wax. Stage the bezel with its liner on and look at it from several steps back; when it's even, mark the edges with painter's tape. Then peel, set it on the marks and press firmly around the whole perimeter. The Installation tab lists the steps and the temperature range for the tape. Choose a dry, mild day, and leave the bond alone for a while before the first wash.
Make sure the Blazer falls between 2019 and 2026, and try any plate frame while staging. Clean with mild soap, water and a soft cloth. Quote LP59140 when calling Quality Automotive Trims at 877-752-3811.
As a single piece with no hardware, the bezel is mostly a cleaning job; the bond itself takes a moment.
LP59140 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | LP59140 |
| UPC | 691821495658 |
| Part type | License Plate Bezel |
| Pieces in kit | 1 |
| Material | Polished 26-gauge 304 stainless steel |
| Finish | Polished to a mirror shine |
| Mounting | 3M automotive-grade acrylic foam tape; installs directly over the existing surface |
| Origin | Made in the USA |
| Fits | 2019-2026 Chevrolet Blazer |
Fitment: LP59140
| Vehicle | Years | Body style |
|---|---|---|
| Chevrolet Blazer | 2019-2026 | 4-door, SUV |
Check your vehicle against every column here: year range, model, and body style all have to match. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Other QAA trim cataloged for the 2019-2026 Chevrolet Blazer
- PP59140: 4-piece Pillar Post Trim
- PP59141: 6-piece Pillar Post Trim
- PP59142: 8-piece Pillar Post Trim
- GC59140: 1-piece Gas Door Cover Trim
- RW59140: 2-piece Rear Window Trim
- LB59140: 1-piece License Bar, Above plate accent Trim
- RB59140: 1-piece Rear Bumper Trim Accent
- WQ59140: 4-piece Wheel Well Accent Trim
Check the body style on each listing; some kits are specific to one body style.
Installation tips: License Plate Bezel
- Unpack the piece and hold it in position to confirm the fit before mounting it.
- Each piece mounts with 3M automotive-grade acrylic foam tape, so clean and dry the mounting surface first; the tape needs paint or trim free of dirt and wax.
- Align the piece and press it firmly into place directly over the existing surface, working along its full length so the tape bonds evenly.
- Step back and check alignment before pressing along the full length of the piece.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: LP59140 License Plate Bezel
Which Blazer years does LP59140 fit?
2019 through 2026, 4-door SUV.
Should I get LB59140 too?
That's up to you. LB59140 is a one-piece above-plate accent; stage both together before installing.
How is the bezel installed?
With 3M automotive-grade acrylic foam tape directly over the existing surface. QAA states the tape will hold for a lifetime without causing any damage to the surface of the vehicle.
Are there exclusions?
None are listed on the fitment row.
What is it made of?
Polished 26-gauge 304 stainless steel, made in the USA.
