Product Description
Honda CR-V 2023-2026 Gas Door Cover Trim, Polished Stainless (GC73235)
GC73235 covers the fuel door of the Honda CR-V 4-door SUV built for model years 2023 through 2026. That's four years on one Fitment row, and there are no trim or package restrictions on it. The part is one piece of polished 304 stainless steel, 26 gauge, made in the USA, and it mounts with 3M automotive-grade acrylic foam tape.
GC73235 is CR-V trim; it is not a replacement cap and not a replacement part. The 2023-2026 CR-V must keep its existing gas door, which the stainless overlays.
Since the fitment begins at 2023, it's worth confirming your year before you order. Four model years is a short span, and your records will settle it quickly. If you're working on a CR-V from before that range, this part isn't listed for it, so give us a call and we'll look up what is.
The only cross-listed parts on this sheet are three pillar post sets: PP73235 with four pieces, PP73236 with six and PP73237 with eight, all for the same 4-door SUV. The catalog doesn't say which window posts the additional pieces in the six- and eight-piece sets cover, so compare the photos on each listing, and check each one for its finish. A pillar set and the gas door trim together put bright accents on the side of the SUV at two different heights.
No drill, no clips, no panel removal: it installs directly over the existing surface. QAA states the tape will hold for a lifetime without causing any damage to the surface of the vehicle. That relies on the paint, so start with a careful look at the door. Repair chips, peeling or cloudy clear coat and any bubbles, and make sure the door closes evenly with the body.
Clean thoroughly, since the tape needs bare paint: wash, rinse, dry, then wipe with a degreaser. Put the trim on the shut door with its liner still attached and nudge it until the paint frame around it is equal on every side. A pair of painter's tape strips at the corners will keep that position while you peel. Press the trim on firmly, covering the whole face with your palm, and give it a second pass after a minute or so. Then open the door slowly to check it swings without catching. The Installation tab lays out each step.
Polished 304 stainless reflects light brightly, and at 26 gauge the overlay hardly thickens the door, so the CR-V's fuel door still closes flush. Install when it's dry and mild out, and wait a night before washing. For upkeep, use mild soap and a soft cloth, and wipe off fuel drips after filling up.
If a pillar set may follow, begin with the gas door: one flat piece with nothing to sort, and it shows the polished finish on your CR-V's paint. Questions about fit or the pillar sets? Call Quality Automotive Trims at 877-752-3811 and mention GC73235. The UPC is on the Specs tab.
GC73235 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | GC73235 |
| UPC | 840251605964 |
| Part type | Gas Door Cover Trim |
| Pieces in kit | 1 |
| Material | Polished 26-gauge 304 stainless steel |
| Finish | Polished to a mirror shine |
| Mounting | 3M automotive-grade acrylic foam tape; installs directly over the existing surface |
| Origin | Made in the USA |
| Fits | 2023-2026 Honda CR-V |
| Not included | This is NOT a replacement gas cap or door; your existing gas door is required |
Fitment: GC73235
| Vehicle | Years | Body style |
|---|---|---|
| Honda CR-V | 2023-2026 | 4-door, SUV |
Fitment is listed exactly as QAA catalogs it. Confirm the body style as well as the year and model. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Other QAA trim cataloged for the 2023-2026 Honda CR-V
Check the body style on each listing; some kits are specific to one body style.
Installation tips: Gas Door Cover Trim
- Confirm your vehicle still has its original gas door. This trim mounts over it and does not replace it.
- Unpack the piece and hold it in position to confirm the fit before mounting it.
- Each piece mounts with 3M automotive-grade acrylic foam tape, so clean and dry the mounting surface first; the tape needs paint or trim free of dirt and wax.
- Align the piece and press it firmly into place directly over the existing surface, working along its full length so the tape bonds evenly.
- Step back and check alignment before pressing along the full length of the piece.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: GC73235 Gas Door Cover Trim
Is GC73235 a replacement gas door?
No. It is not a replacement cap or replacement part. You MUST have the existing gas door to install this piece.
Which CR-V years fit?
The 2023-2026 Honda CR-V 4-door SUV.
What is it made of?
Polished 304 stainless steel, 26 gauge, made in the USA.
Does it need drilling?
No. It installs directly over the existing surface with 3M automotive-grade acrylic foam tape.
How long does the tape hold?
QAA states the tape will hold for a lifetime without causing any damage to the surface of the vehicle.
Which pillar post sets are listed?
PP73235 (4 pieces), PP73236 (6 pieces) and PP73237 (8 pieces).
