Product Description
2026 Honda Passport Polished Stainless Gas Door Trim (GC76220)
GC76220 is listed for one model year only: the 2026 Honda Passport 4-door SUV. The Fitment row covers that single year, so check your records before ordering. If your Passport is from another year, it isn't listed for this part; call us and we'll look up the right number.
It is not a replacement cap and not a replacement part. You MUST have the existing gas door to install this piece. The trim is a polished overlay for the face of the Passport's own door.
The Passport piece is one sheet of 304 stainless steel at 26 gauge, made in the USA. Mounting is by the 3M automotive-grade acrylic foam tape already on the Passport piece's back. It installs directly over the existing surface with no drilling. QAA states the tape will hold for a lifetime without causing any damage to the surface of the vehicle. Give the door a look anyway for chips or marks, and confirm it closes flush.
For this Passport the sheet already lists a good spread of cross-listed trim. PP76220, PP76221 and PP76222 are four-, six- and eight-piece pillar post sets; their photos show what the additional pieces cover. TH76220 is a four-piece rocker accent kit at 4 inches wide, noted for the doors only, so it's mounted on the doors rather than running the length of the rocker. At the rear, RW76220 is a two-piece set of rear window side accents, RD76220 is a one-piece rear deck accent at 1 inch wide on its own listing, and SGR76220 is an eight-piece set of "PASSPORT" rear hatch letter inserts. The SGR76220 name in the catalog is missing its closing quote mark, a small typo we've logged. SGR76221, WP76220, WP76221, WS76220 and LP76220 are cross-listed by number only, so check each listing for its details and finish.
The install is straightforward. Clean the door with soapy water, rinse, dry, and wipe it down with a degreaser to remove any wax. Position the trim on the closed door with the liner still on, adjust until the paint border is even, and mark it with painter's tape. Peel the liner, line up with your marks, and press firmly across the full face, going over it again after about a minute. Open the door slowly to make sure it swings freely. The Installation tab gives more detail.
Polished 304 stainless gives a bright, reflective accent, and 26 gauge keeps it slim against the door. Install on a dry, mild day and wait overnight before washing. Clean it later with mild soap and a soft cloth, wiping away fuel drips after filling.
If the letter inserts or pillar posts are planned, the gas door is the simplest start: one flat piece, done in minutes, showing how the polish looks on your Passport. Because the fitment is a single year, it's always worth a quick call if you're unsure. Reach Quality Automotive Trims at 877-752-3811 and mention GC76220. The UPC is on the Specs tab.
GC76220 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | GC76220 |
| UPC | 840251606565 |
| Part type | Gas Door Cover Trim |
| Pieces in kit | 1 |
| Material | Polished 26-gauge 304 stainless steel |
| Finish | Polished to a mirror shine |
| Mounting | 3M automotive-grade acrylic foam tape; installs directly over the existing surface |
| Origin | Made in the USA |
| Fits | 2026 Honda Passport |
| Not included | This is NOT a replacement gas cap or door; your existing gas door is required |
Fitment: GC76220
| Vehicle | Years | Body style |
|---|---|---|
| Honda Passport | 2026 | 4-door, SUV |
Check your vehicle against every column here: year range, model, and body style all have to match. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Other QAA trim cataloged for the 2026 Honda Passport
- PP76220: 4-piece Pillar Post Trim
- PP76221: 6-piece Pillar Post Trim
- PP76222: 8-piece Pillar Post Trim
- TH76220: 4-piece Rocker Panel Trim, Lower Accent Kit
- RD76220: 1-piece Rear Deck Accent
- RW76220: 2-piece Rear Window Trim Side Accents
- SGR76220: 8-piece Graphic/Logo/Emblem
- SGR76221: 8-piece "PASSPORT" Front Bumper Letter Inserts
Check the body style on each listing; some kits are specific to one body style.
Installation tips: Gas Door Cover Trim
- Confirm your vehicle still has its original gas door. This trim mounts over it and does not replace it.
- Unpack the piece and hold it in position to confirm the fit before mounting it.
- Each piece mounts with 3M automotive-grade acrylic foam tape, so clean and dry the mounting surface first; the tape needs paint or trim free of dirt and wax.
- Align the piece and press it firmly into place directly over the existing surface, working along its full length so the tape bonds evenly.
- Step back and check alignment before pressing along the full length of the piece.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: GC76220 Gas Door Cover Trim
Is GC76220 a replacement gas door?
No. It is not a replacement cap or replacement part. You MUST have the existing gas door to install this piece.
Which Passport years fit?
Only the 2026 Honda Passport 4-door SUV is listed.
What is it made of?
Polished 304 stainless steel, 26 gauge, made in the USA.
Does it need drilling?
No. It installs directly over the existing surface with 3M automotive-grade acrylic foam tape.
How long does the tape hold?
QAA states the tape will hold for a lifetime without causing any damage to the surface of the vehicle.
Is there a "PASSPORT" letter set?
Yes. SGR76220 is an eight-piece set of "PASSPORT" rear hatch letter inserts.
