Product Description
Cadillac CTS 2008-2011 Stainless License Plate Bezel (LP48250)
This listing is about as simple as our catalog gets. LP48250 is one License Plate Bezel for one vehicle: the Cadillac CTS 4-door sedan built for model years 2008 through 2011. There are no companion parts listed on its page, no trim exclusions, no build-date rules and no fitment notes. What's left is a single piece of polished stainless that frames the plate area, and the job of deciding whether it suits your car.
What the piece is made of
The bezel is cut from 26-gauge 304 stainless steel and polished to a mirror finish, then made in the USA. Stainless of this grade holds up to road salt and rain without needing a coating. Because the sheet is thin, the part follows the contour it's taped to rather than standing proud of the surface.
Confirming your car
Fitment comes down to two things: the body and the year. The catalog row reads CTS, 4-door sedan, 2008 to 2011, and nothing else. Your records will confirm the model year. If your car doesn't match the sedan body, or the year sits outside that range, please don't order on a guess; call Quality Automotive Trims at 877-752-3811 with SKU LP48250 and the details from your car, and we'll tell you what the catalog shows.
It also helps to look at the product photos side by side with the plate area on your own CTS. Note anything near the plate, such as a release, lighting or an emblem, and compare it against the shape of the bezel before you buy.
How it attaches
There's no drilling and no hardware. 3M automotive-grade acrylic foam tape bonds the bezel directly over the existing surface. QAA states the tape will hold for a lifetime without causing any damage to the surface of the vehicle.
The tape is only as good as what it sticks to. On a car of this age, take a close look around the plate first. Chipped, peeling or lifting clear coat should be repaired before anything goes on top of it, and any residue from an old frame or dealer sticker has to come off. After that, wash the area, let it dry fully and wipe it with rubbing alcohol. The Installation tab walks through the rest in order, including the temperature range for the tape.
Getting placement right
Leave the tape liner on and hold the bezel up first. Walk back until the whole rear of the CTS is in view and check the margins look even. A few short pieces of painter's tape at the corners will hold your reference. Then peel, place it in one go, and press firmly over every edge.
Living with it
If you run a plate frame, bring it to the dry fit and check how its edge meets the bezel. For upkeep, a soft cloth with mild soap and water keeps the polish bright. Skip scouring pads and harsh cleaners. Cadillac rows as cataloged are on the Fitment tab.
LP48250 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | LP48250 |
| UPC | 757565505241 |
| Part type | License Plate Bezel |
| Pieces in kit | 1 |
| Material | Polished 26-gauge 304 stainless steel |
| Finish | Polished to a mirror shine |
| Mounting | 3M automotive-grade acrylic foam tape; installs directly over the existing surface |
| Origin | Made in the USA |
| Fits | 2008-2011 Cadillac CTS |
Fitment: LP48250
| Vehicle | Years | Body style |
|---|---|---|
| Cadillac CTS | 2008-2011 | 4-door, Sedan |
Match the year, model, and body style in this table to your vehicle before ordering. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Installation tips: License Plate Bezel
- Unpack the piece and hold it in position to confirm the fit before mounting it.
- Each piece mounts with 3M automotive-grade acrylic foam tape, so clean and dry the mounting surface first; the tape needs paint or trim free of dirt and wax.
- Align the piece and press it firmly into place directly over the existing surface, working along its full length so the tape bonds evenly.
- Step back and check alignment before pressing along the full length of the piece.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: LP48250 License Plate Bezel
Which Cadillac does LP48250 fit?
The CTS 4-door sedan, model years 2008 through 2011.
Are there other trims listed for this CTS on the same page?
No. This listing has no companion parts. Call 877-752-3811 if you're looking for something else for your car.
Do I need to drill anything?
No. It uses 3M automotive-grade acrylic foam tape over the existing surface. QAA states the tape will hold for a lifetime without causing any damage to the surface of the vehicle.
What is it made from?
Polished 26-gauge 304 stainless steel, made in the USA.
How many pieces are included?
One.
