Product Description
Ford Escape 2020-2022 Stainless License Plate Bezel (LP60360)
LP60360 is a one-piece stainless License Plate Bezel for the Ford Escape 4-door SUV, model years 2020, 2021 and 2022. The catalog gives it one fitment row with no exclusions, and the title agrees. Only two other parts are linked: RW60360, a two-piece Rear Window Trim, and RD60360, a one-piece part at 2" that the catalog calls a "Rear Deck Accent." The record doesn't say exactly where the piece goes on the Escape, so its photos are the place to check. Each of those listings covers its own finish and mounting.
Let's talk about why someone picks a plate bezel at all. It's a small part, but it frames a spot people look at every time they walk behind the car, and polished stainless gives that spot a crisp edge. The bezel is made of 26-gauge 304 stainless steel with a mirror finish, made in the USA. There's no plating, which means no surface coat to fade or chip; the shine is the metal itself.
The catalog doesn't publish dimensions for LP60360. That means the product photos do the measuring. Bring them up on your phone, stand behind your Escape and compare. Note anything close to the plate that the bezel would need to clear. If what you see doesn't match, call Quality Automotive Trims at 877-752-3811 with the SKU before you order.
Attachment is with 3M automotive-grade acrylic foam tape, directly over the existing surface, and there's nothing to drill. QAA states the tape will hold for a lifetime without causing any damage to the surface of the vehicle. Good adhesion needs good paint, though, so check the finish around the plate for chips or lifting clear coat and have those repaired first.
Here's the job in sequence, written as a short story rather than a checklist. You start by clearing old glue or decal residue from the plate area. Soap and water follow, then a full dry, then a rubbing alcohol wipe that leaves bare, clean paint. With the liner still on, you hold the bezel where it belongs and walk back to look at it from the middle of the driveway. A small nudge one way or the other, and it's set; a few strips of painter's tape record the spot. You peel the liner, bring the bezel back to the marks and press firmly around its edge. The Installation tab has the same steps with the temperature range.
With RD60360 also coming, stage the two together before sticking either down, since the catalog doesn't give the gap between them.
The 2020-2022 Escape is what this one covers. Try any plate frame at the dry fit. Clean with mild soap, water and a soft cloth. Mention LP60360 when you call 877-752-3811.
Pick a dry, mild day for the work, and let the bond settle for a while before the bezel meets water. With a single piece and no hardware, the whole job is short, and most of it is cleaning.
LP60360 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | LP60360 |
| UPC | 691821566587 |
| Part type | License Plate Bezel |
| Pieces in kit | 1 |
| Material | Polished 26-gauge 304 stainless steel |
| Finish | Polished to a mirror shine |
| Mounting | 3M automotive-grade acrylic foam tape; installs directly over the existing surface |
| Origin | Made in the USA |
| Fits | 2020-2022 Ford Escape |
Fitment: LP60360
| Vehicle | Years | Body style |
|---|---|---|
| Ford Escape | 2020-2022 | 4-door, SUV |
Match the year, model, and body style in this table to your vehicle before ordering. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Other QAA trim cataloged for the 2020-2022 Ford Escape
Check the body style on each listing; some kits are specific to one body style.
Installation tips: License Plate Bezel
- Unpack the piece and hold it in position to confirm the fit before mounting it.
- Each piece mounts with 3M automotive-grade acrylic foam tape, so clean and dry the mounting surface first; the tape needs paint or trim free of dirt and wax.
- Align the piece and press it firmly into place directly over the existing surface, working along its full length so the tape bonds evenly.
- Step back and check alignment before pressing along the full length of the piece.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: LP60360 License Plate Bezel
Which Escape years does LP60360 fit?
2020 through 2022, 4-door SUV.
Where does RD60360 go on the Escape?
The catalog names it a rear deck accent but doesn't give its position. Check its photos or call 877-752-3811.
How is the bezel attached?
With 3M automotive-grade acrylic foam tape directly over the existing surface. No drilling.
What is it made of?
Polished 26-gauge 304 stainless steel, made in the USA.
Are there exclusions?
None are listed on the fitment row.
