Product Description
Ford Escape 2020-2026 License Bar in Polished 304 Stainless (LB60360)
Seven model years of the Ford Escape share this part number. LB60360 fits the 2020-2026 Escape 4-door SUV, putting one polished stainless strip on the liftgate above the rear plate. The catalog name is License Bar, Above plate accent Trim; the count is one piece.
Behind the shine is 26-gauge 304 stainless steel, polished and made in the USA. 3M automotive-grade acrylic foam tape holds it on, and it installs directly over the existing surface without drilling. QAA states the tape will hold for a lifetime without causing any damage to the surface of the vehicle.
A word about adhesive promoter
One part on the Escape list, MI60360, a four-piece body molding insert kit, is noted Use Adhesive Promoter. That instruction is on the insert kit's listing. LB60360's own listing mentions only the 3M tape and installation over the existing surface, with no promoter note. If you're installing both, follow each listing's instructions separately, and check the Installation tab for this bar.
Unknowns, and how to handle them
No width, no length, and no note about cutouts for a key, camera or badge. The product photos are where you'll see the shape and placement. Hold your phone up beside your liftgate and compare. Anything in the bar's path that the photos don't show is a reason to call Quality Automotive Trims at 877-752-3811 with LB60360 before ordering.
Fitting steps
Clean the area above the plate with soapy water, rinse and dry, then wipe with rubbing alcohol. Inspect for chips or adhesive left by a dealer badge and clear it. With the liner still on, set the bar in place and measure from each end to the plate's edges until the numbers match. Look from a few paces back to confirm it's level. Painter's tape at each end marks the spot. Peel, align, and press firmly from center to ends. Remove the tape marks, press once more, and treat the liftgate gently for the first day. Temperature guidance is on the Installation tab.
Other Escape parts
Six more parts are cross-listed for this Escape. PP60360 and PP60361 are pillar post kits of four and six pieces. GC60360 is a one-piece gas door cover trim. TH60360 is an eight-piece lower rocker kit with a width listed as 3.5-4.25" that spans from the bottom of the door up. DH60361 is a one-piece tailgate handle accent trim, which sits on the liftgate near this bar, so compare the two listings' photos together if you want both. Check each listing for its finish.
Year check
Your Escape's year should fall inside that range. If the year falls from 2020 to 2026, the Escape is on the listing.
One piece, low risk
As a single part in a single spot, a license bar is an easy way to see polished stainless against your Escape's paint before deciding on pillar posts or rocker trim. Hold it up with the liner on in daylight and judge it.
Keep it bright with mild soap and water and a soft towel; skip anything abrasive.
LB60360 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | LB60360 |
| UPC | 691821738502 |
| Part type | License Bar, Above plate accent Trim |
| Pieces in kit | 1 |
| Material | Polished 26-gauge 304 stainless steel |
| Finish | Polished to a mirror shine |
| Mounting | 3M automotive-grade acrylic foam tape; installs directly over the existing surface |
| Origin | Made in the USA |
| Fits | 2020-2026 Ford Escape |
Fitment: LB60360
| Vehicle | Years | Body style |
|---|---|---|
| Ford Escape | 2020-2026 | 4-door, SUV |
Check your vehicle against every column here: year range, model, and body style all have to match. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Other QAA trim cataloged for the 2020-2026 Ford Escape
- PP60360: 4-piece Pillar Post Trim
- PP60361: 6-piece Pillar Post Trim
- GC60360: 1-piece Gas Door Cover Trim
- MI60360: 4-piece Body Molding Insert Trim Kit
- TH60360: 8-piece Rocker Panel Trim, Lower Kit
- DH60361: 1-piece Tailgate Handle Accent Trim
Check the body style on each listing; some kits are specific to one body style.
Installation tips: License Bar, Above plate accent Trim
- Unpack the piece and hold it in position to confirm the fit before mounting it.
- Each piece mounts with 3M automotive-grade acrylic foam tape, so clean and dry the mounting surface first; the tape needs paint or trim free of dirt and wax.
- Align the piece and press it firmly into place directly over the existing surface, working along its full length so the tape bonds evenly.
- Step back and check alignment before pressing along the full length of the piece.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: LB60360 License Bar, Above plate accent Trim
Which Escape years does LB60360 fit?
2020 through 2026, 4-door SUV.
Do I need adhesive promoter?
This listing mentions only 3M tape. The promoter note is on the MI60360 insert kit. Call 877-752-3811 if unsure.
How wide is it?
No width is listed. See the photos.
How does it attach?
3M automotive-grade acrylic foam tape, directly over the existing surface. QAA states the tape will hold for a lifetime without causing any damage to the surface of the vehicle.
How many pieces?
One.
