Product Description
Ford Escape 2020-2026 Rear Handle Surround in Polished Stainless (DH60361)
On the Ford Escape, the rear handle is a small detail at the center of the liftgate. DH60361 outlines it with one piece of polished 304 stainless steel, 26 gauge, made in the USA. QAA categorizes it as tailgate handle accent trim, and its only note, "Surround," tells you it frames the handle rather than covering it.
The vehicle
Ford Escape, model years 2020 through 2026, 4-door SUV. A single row, matching the title, appears in the Fitment tab.
Shape and placement
QAA gives no dimensions for the surround. The product photos are the clearest view of its outline. Compare them with the area around your Escape's rear handle before ordering, and call if anything looks different.
Stainless, not chrome plating
The polished surface is the steel itself. The 26-gauge piece lies close against the Escape's panel around the handle, and 304 is a widely used stainless grade for exterior trim.
How it's held
On the 2020-2026 Escape, the surround mounts with 3M automotive-grade acrylic foam tape over the tailgate handle's existing surface. Per QAA, the tape will hold for a lifetime and won't damage the Escape's surface.
Installation
Wash around the handle, rinse, and wipe the area with a degreaser. Let it dry completely, paying attention to the recess where water can hide. With the liner still on, hold the surround in place and check its alignment from straight behind the SUV and from each rear corner. Mark the corners with painter's tape. Peel the liner, set the surround on the marks and press firmly around its whole perimeter, then repeat after a minute. The Installation tab has more on prep.
Escape trim QAA cross-lists
- LB60360, a 1pc license bar accent that sits above the plate
- GC60360, a 1pc gas door cover trim
- PP60360 and PP60361, pillar post trim in 4pc and 6pc versions
- MI60360, a 4pc body molding insert kit noted "Use Adhesive Promoter"
- TH60360, an 8pc lower rocker panel kit spanning from the bottom of the door up, listed at 3.5-4.25"
The license bar is the natural companion here, since it also dresses the rear of the Escape. Each part's page has its own fitment and notes.
Why centering matters
A surround frames the handle, so any tilt or offset is easy to spot from behind the vehicle. Spending a minute on the painter's tape marks before the liner comes off is the surest way to get it even first time.
Conditions for a good bond
A mild, dry day out of direct sun gives the tape the best chance. If the Escape was waxed recently, degrease twice. Keep it dry overnight while the tape sets.
Cleaning later
Wash with mild soap and a soft towel. Steel wool and scouring pads will scratch the polish.
Before you click buy
Check that your Escape falls in the listed years and that its rear handle area matches the photos. That's all it takes.
Questions
Escape tailgate questions on DH60361 are answered at 877-752-3811. The Escape tailgate trim's barcode appears in Specs.
DH60361 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | DH60361 |
| UPC | 691821627066 |
| Part type | Tailgate Handle Accent Trim |
| Pieces in kit | 1 |
| Material | Polished 26-gauge 304 stainless steel |
| Finish | Polished to a mirror shine |
| Mounting | 3M automotive-grade acrylic foam tape; installs directly over the existing surface |
| Origin | Made in the USA |
| Fits | 2020-2026 Ford Escape |
Fitment: DH60361
| Vehicle | Years | Body style |
|---|---|---|
| Ford Escape | 2020-2026 | 4-door, SUV |
Match the year, model, and body style in this table to your vehicle before ordering. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Other QAA trim cataloged for the 2020-2026 Ford Escape
- PP60360: 4-piece Pillar Post Trim
- PP60361: 6-piece Pillar Post Trim
- GC60360: 1-piece Gas Door Cover Trim
- LB60360: 1-piece License Bar, Above plate accent Trim
- MI60360: 4-piece Body Molding Insert Trim Kit
- TH60360: 8-piece Rocker Panel Trim, Lower Kit
Check the body style on each listing; some kits are specific to one body style.
Installation tips: Tailgate Handle Accent Trim
- Unpack the piece and hold it in position to confirm the fit before mounting it.
- Each piece mounts with 3M automotive-grade acrylic foam tape, so clean and dry the mounting surface first; the tape needs paint or trim free of dirt and wax.
- Align the piece and press it firmly into place directly over the existing surface, working along its full length so the tape bonds evenly.
- Step back and check alignment before pressing along the full length of the piece.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: DH60361 Tailgate Handle Accent Trim
What does DH60361 fit?
The 2020-2026 Ford Escape, 4-door SUV.
Does it cover the handle?
No. QAA notes it as a surround that frames the rear handle.
What is it made of?
Polished 304 stainless steel, 26 gauge, made in the USA.
Does it need drilling?
No. It installs directly over the existing surface with 3M automotive-grade acrylic foam tape.
How long does the tape hold?
QAA states the tape will hold for a lifetime without causing any damage to the surface of the vehicle.
