Product Description
Cadillac XT6 2020-2025 Stainless License Plate Bezel (LP60210)
The Cadillac XT6 4-door SUV, model years 2020 through 2025, has one stainless License Plate Bezel on the QAA catalog, and LP60210 is it. The single fitment row spans six model years with no exclusions or footnotes, and the title agrees. It's a one-piece part with nothing to assemble.
That simplicity stands in contrast to the rest of the XT6 list. Fifteen other parts are linked, seven of them Pillar Post Trim kits that grow in count: PP60210 with four, PP60211 with six, PP60212 with eight, PP60213 with ten, PP60214 with twelve, PP60215 with fourteen and PP60216 with sixteen. The three largest kits carry notes about front pieces. PP60214 includes the front pillar before the mirror, PP60215 a small front pillar after the mirror, and PP60216 the small front pillar after the mirror plus a front triangle. The catalog doesn't break down the smaller kits beyond their counts, so the photos are the way to compare them.
The other eight, RD60210, TH60210, RW60210, DH60210, RB60210, GC60210, HL60210 and WQ60210, are linked by number only. This sheet doesn't describe them, so open those listings for their type, finish and mounting. If any of them sits near the plate, stage it with the bezel before installing.
LP60210 itself is 26-gauge 304 stainless steel, polished to a mirror finish and made in the USA. Polished stainless doesn't depend on a plated layer, so the face has nothing to peel. No dimensions are on the record. Compare the product photos with your own plate area and look for anything near it that the bezel would need to clear.
Mounting is with 3M automotive-grade acrylic foam tape, directly over the existing surface, without drilling. QAA states the tape will hold for a lifetime without causing any damage to the surface of the vehicle. Because that adhesive bonds to the paint, the finish around the plate needs to be in good condition; repair any chips or lifting clear coat first.
Prep and placement run in a natural order. Strip residue from old frames or decals, wash with soap and water, dry fully and wipe with rubbing alcohol. Hold the bezel in position with its liner on and assess it from behind the SUV. Once it looks even, mark it with a few pieces of painter's tape. Peel, return to the marks, and press firmly along the whole edge. The Installation tab lists the steps and the temperature range for the tape. Pick a dry, mild day and let the adhesive rest before the first wash.
The XT6 is listed for 2020 to 2025. Try any plate frame during the dry fit. Afterward, clean the bezel with mild soap, water and a soft cloth. If a question comes up, call Quality Automotive Trims at 877-752-3811 and give SKU LP60210.
If you're weighing the bezel against one of the bigger kits, it's the quicker job by far: one piece, no hardware, and a clear view of how the polish looks on your XT6.
LP60210 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | LP60210 |
| UPC | 691821649709 |
| Part type | License Plate Bezel |
| Pieces in kit | 1 |
| Material | Polished 26-gauge 304 stainless steel |
| Finish | Polished to a mirror shine |
| Mounting | 3M automotive-grade acrylic foam tape; installs directly over the existing surface |
| Origin | Made in the USA |
| Fits | 2020-2025 Cadillac XT6 |
Fitment: LP60210
| Vehicle | Years | Body style |
|---|---|---|
| Cadillac XT6 | 2020-2025 | 4-door, SUV |
Check your vehicle against every column here: year range, model, and body style all have to match. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Other QAA trim cataloged for the 2020-2025 Cadillac XT6
- PP60210: 4-piece Pillar Post Trim
- PP60211: 6-piece Pillar Post Trim
- PP60212: 8-piece Pillar Post Trim
- PP60213: 10-piece Pillar Post Trim
- PP60214: 12-piece Pillar Post Trim
- PP60215: 14-piece Pillar Post Trim
- PP60216: 16-piece Pillar Post Trim
- RD60210: 1-piece Rear Deck Accent
Check the body style on each listing; some kits are specific to one body style.
Installation tips: License Plate Bezel
- Unpack the piece and hold it in position to confirm the fit before mounting it.
- Each piece mounts with 3M automotive-grade acrylic foam tape, so clean and dry the mounting surface first; the tape needs paint or trim free of dirt and wax.
- Align the piece and press it firmly into place directly over the existing surface, working along its full length so the tape bonds evenly.
- Step back and check alignment before pressing along the full length of the piece.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: LP60210 License Plate Bezel
Which XT6 years does LP60210 fit?
2020 through 2025, 4-door SUV.
How many XT6 pillar kits are listed?
Seven, from PP60210 with four pieces up to PP60216 with sixteen.
Which pillar kits include front pieces?
Per their notes, PP60214, PP60215 and PP60216. Check those listings for details.
How is the bezel installed?
With 3M automotive-grade acrylic foam tape directly over the existing surface. QAA states the tape will hold for a lifetime without causing any damage to the surface of the vehicle.
What is it made of?
One piece of polished 26-gauge 304 stainless steel, made in the USA.
