Product Description
Full-Length Rocker Kit for the 1992-1994 Cadillac Eldorado, Ten Pieces, 8.16" (TH32231)
TH32231 runs the length of the 1992-1994 Cadillac Eldorado coupe. Its record says "Full Length, Includes coverage from the wheel well to the bumper on the front and rear" and "Spans from the bottom of the molding to the bottom of the door." Ten pieces of polished stainless steel at 8.16" make up the kit.
Ten vs six
The linked TH32230 is six pieces at the same width but limited to the area between the wheel wells. TH32231 extends coverage beyond the wheels to the bumpers at each end. The record doesn't say how the four further pieces are used or assign positions to any of them.
Before you buy
Decide whether you want steel ahead of the front wheels and behind the rear wheels. If yes, this is the kit. Measure the band from the molding to the door bottom; it should be close to 8.16". If anything doesn't line up, call 877-752-3811.
Fitment
Cadillac Eldorado 1992-1994, 2-door coupe. No other bodies or years are listed on this record.
Specification
- Ten pieces, Full Kit, full length
- 8.16" width
- Eldorado steel: polished 304, 26 gauge
- Eldorado set built in America
- Fixed to the Eldorado as it is with 3M automotive-grade acrylic foam tape
Per QAA, the tape behind the ten full-length Eldorado pieces will hold for a lifetime with no damage to the Cadillac coupe.
Laying out a full-length kit
Arrange the pieces in order on the floor: front end pieces, door pieces, rear end pieces, using the photos to identify them. Label each liner with its spot.
Prep beyond the doors
Clean every surface the steel will touch, including the areas between the wheels and bumpers, where road tar collects. Wash, then wipe with isopropyl alcohol until clean. Repair chips first.
Mounting order
Doors first, since the molding and door bottom give firm edges. Then fit the end pieces, lining up their top edges with the door pieces. Check each joint from a few steps back before pressing.
Door clearance
After the pieces on both sides of a door gap are on, open and close the door slowly.
Joint positions
As you go, measure each joint's position from the nearest wheel opening or door gap and keep them consistent. Sight along the car from the front to compare.
Supplies
Car soap, isopropyl alcohol, plenty of clean cloths, painter's tape and a marker, a tape measure, a plastic tool for tar near the wheels, and a helper for the longer panels.
If a piece doesn't sit right
End pieces have to follow the body between the wheel and bumper. If one won't sit flat during the dry-fit, don't force or bend it. Stop and call with a photo; it's easier to sort out before the tape meets paint.
Plan the time
Ten pieces is an afternoon. Dry, mild weather; about a day before washing; non-abrasive polish for upkeep.
Questions about the full-length layout? Quality Automotive Trims, 877-752-3811. SKU TH32231, UPC 691821452576.
TH32231 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | TH32231 |
| UPC | 691821452576 |
| Part type | Rocker Panel Trim, Full Kit |
| Pieces in kit | 10 |
| Material | Polished 26-gauge 304 stainless steel |
| Finish | Polished to a mirror shine |
| Width | 8.16" |
| Coverage / notes | Full Length, Includes coverage from the wheel well to the bumper on the front and rear; Spans from the bottom of the molding to the bottom of the door |
| Mounting | 3M automotive-grade acrylic foam tape; installs directly over the existing surface |
| Origin | Made in the USA |
| Fits | 1992-1994 Cadillac Eldorado |
Fitment: TH32231
| Vehicle | Years | Body style |
|---|---|---|
| Cadillac Eldorado | 1992-1994 | 2-door, Coupe |
Check your vehicle against every column here: year range, model, and body style all have to match. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Other QAA trim cataloged for the 1992-1994 Cadillac Eldorado
- TH32230: 6-piece Rocker Panel Trim, Full Kit
Check the body style on each listing; some kits are specific to one body style.
Installation tips: Rocker Panel Trim, Full Kit
- Unpack all 10 pieces and match each one to its position on the vehicle, using the product photos, before fitting any of them.
- Each piece mounts with 3M automotive-grade acrylic foam tape, so clean and dry the mounting surface first; the tape needs paint or trim free of dirt and wax.
- Align the piece and press it firmly into place directly over the existing surface, working along its full length so the tape bonds evenly.
- Fit one piece at a time and compare each with the product photos and the pieces already in place.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: TH32231 Rocker Panel Trim, Full Kit
Does TH32231 cover past the wheels?
Yes. The listing includes coverage from the wheel well to the bumper on the front and rear.
What's TH32230?
A six-piece 8.16" kit covering between the wheel wells only.
Which years?
1992-1994 Eldorado coupe.
How many pieces?
Ten.
