Product Description
1994-2001 Ram Extra Cab Long Bed Stainless Rocker Trim, Full Kit, Ten Pieces, 8.75" (TH34923)
TH34923 is the Full Kit tagged "Pickup Truck, Extra Cab, Long Bed" for the 1994-2001 Dodge Ram. The record lists ten pieces of polished stainless steel, an 8.75" width, and a span "from the bottom of the molding to the bottom of the door."
Cab and bed, in that order
Confirm the cab first. If your Ram is an Extra Cab, the full-height choices are this kit (long bed) and TH34922 (short bed). If it isn't, the "Full Size" kits TH34920 and TH34921 are tagged for the other cab. Then confirm the bed. The record doesn't give bed measurements, so if you're unsure what your truck's bed is called, call 877-752-3811 with a photo of the whole side.
Want less steel?
TH34927 carries the same Extra Cab, long bed tag but is an Upper Kit. Its steel stops 5.625" below the molding rather than reaching the bottom of the door. The pick depends on how much of the lower door you want polished.
Matching the wheel wells
Two wheel well fender trim moldings are linked. WZ34920 is "Short Style." WZ34921 is "Full Length" and tagged 1500 and 2500. Both are four pieces. If you're planning both rocker and wheel well trim, look at all the listings' photos together before ordering, and check each listing for its finish.
Pillar trim
PP34920 is a two-piece pillar post kit tagged 2-door pickup. Confirm on its listing whether that suits an Extra Cab.
Material and attachment
Built for the 1994-2001 Ram Extra Cab long bed, ten 8.75" pieces of USA-made polished 26 gauge 304 stainless steel run from the molding to the door bottom on 3M automotive-grade acrylic foam tape. QAA states that tape will hold for a lifetime with no harm to the pickup.
Measure first
From the underside of the molding to the bottom of the door, at a few points on each door. The record's figure is 8.75".
Layout
Ten Ram pieces with no position list: use the photos and label every liner.
Clean and inspect
Wash, dry and wipe with isopropyl alcohol. Look for chips and rust along the lowest edge of each door and fix them first.
Install
Dry-fit, peel a few inches, set the top under the molding, and press across the piece as the liner comes off. Firm palm pressure over every part finishes the bond.
Checking the Ram line
Measure positions as you go and keep them consistent, then compare from the front and rear corners.
Supplies
Mild soap, isopropyl alcohol, a stack of lint-free cloths, painter's tape and a marker, a tape measure, a plastic trim tool, and a second person to steady the taller pieces.
Timing
Pick a dry, mild day and park in the shade. The tape bonds best when neither the steel nor the paint is hot or cold to the touch.
Care
Hold off washing the Ram for a day; mild soap and soft cloths after.
For Ram kit TH34923 (UPC 691821617463), call Quality Automotive Trims at 877-752-3811.
TH34923 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | TH34923 |
| UPC | 691821617463 |
| Part type | Rocker Panel Trim, Full Kit |
| Pieces in kit | 10 |
| Material | Polished 26-gauge 304 stainless steel |
| Finish | Polished to a mirror shine |
| Width | 8.75" |
| Coverage / notes | Spans from the bottom of the molding to the bottom of the door |
| Mounting | 3M automotive-grade acrylic foam tape; installs directly over the existing surface |
| Origin | Made in the USA |
| Fits | 1994-2001 Dodge Ram |
Fitment: TH34923
| Vehicle | Years | Body style |
|---|---|---|
| Dodge Ram | 1994-2001 | Pickup Truck, Extra Cab, Long Bed |
Fitment is listed exactly as QAA catalogs it. Confirm the body style as well as the year and model. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Other QAA trim cataloged for the 1994-2001 Dodge Ram
- TH34920: 10-piece Rocker Panel Trim, Full Kit
- TH34921: 10-piece Rocker Panel Trim, Full Kit
- TH34922: 10-piece Rocker Panel Trim, Full Kit
- TH34924: 10-piece Rocker Panel Trim, Upper Kit
- TH34925: 10-piece Rocker Panel Trim, Upper Kit
- TH34926: 10-piece Rocker Panel Trim, Upper Kit
- TH34927: 10-piece Rocker Panel Trim, Upper Kit
- WZ34920: 4-piece Wheel Well Fender Trim Molding
Check the body style on each listing; some kits are specific to one body style.
Installation tips: Rocker Panel Trim, Full Kit
- Unpack all 10 pieces and match each one to its position on the vehicle, using the product photos, before fitting any of them.
- Each piece mounts with 3M automotive-grade acrylic foam tape, so clean and dry the mounting surface first; the tape needs paint or trim free of dirt and wax.
- Align the piece and press it firmly into place directly over the existing surface, working along its full length so the tape bonds evenly.
- Fit one piece at a time and compare each with the product photos and the pieces already in place.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: TH34923 Rocker Panel Trim, Full Kit
Which Ram is TH34923 for?
1994-2001 Dodge Ram, Extra Cab, long bed.
Is there an Upper Kit for the same truck?
Yes, TH34927, 5.625" down from the molding.
Does it reach the bottom of the door?
Yes. It spans from the bottom of the molding to the bottom of the door, 8.75".
Are wheel well trims included?
No. WZ34920 and WZ34921 are separate linked listings.
