Product Description
1995-1997 Blazer / S-15 Jimmy Four-Door Stainless Rocker Kit, 10 Pieces, 5" Full Kit (TH35193)
For the 4-door 1995-1997 Chevrolet Blazer or GMC S-15 Jimmy, TH35193 is a ten-piece polished stainless steel Full Kit. The width is 5", and the span note reads "Spans from the bottom of the molding to the bottom of the door."
Four doors, ten pieces
Ten is more than one per door, and the record doesn't say where the remaining pieces go or how the doors divide them. The product photos are the best guide. Before you clean anything, unpack the kit, arrange the pieces, match each to the photos, and label it. If one piece has no obvious home, call 877-752-3811 before installing.
The two-door version
TH35191 is the linked six-piece kit for the 2-door. It's the same 5" width and span; only the door tag and piece count differ.
GMC owners
Both nameplates are in the title, and the fitment row lists the GMC S-15 Jimmy for 1995-1997 with the same 4-door SUV tag as the Blazer.
A quick fit check
- Is there a side molding on each door? The steel's top edge starts under it.
- Measure molding to door bottom, front and rear of each door.
- Readings near 5" match the record.
- No molding, or a very different number: phone first.
What it's made of
Built for the 4-door 1995-1997 Blazer and S-15 Jimmy, the ten pieces are polished 26 gauge 304 stainless from a USA shop, secured from molding to door bottom with 3M automotive-grade acrylic foam tape. Per QAA, the tape will hold for a lifetime without harm.
Paint on an older SUV
Lower doors on a vehicle of this age often carry years of wax plus chips from the road. Wash, dry, then wipe with isopropyl alcohol repeatedly until a clean cloth stays clean. Touch up any chips inside the band and let them cure. If you're unsure about a spot, press painter's tape onto it and pull; if paint comes away, repair it first.
Order of work
Start with a front door, since it sets the line for the rest. Move rearward, keeping measurements consistent.
Each piece
Dry-fit with the liner on. Peel a little, set the top edge against the molding, and press toward the far end as the liner comes away. Finish with firm pressure along every edge.
Rear doors
Open each rear door after its piece is on and check that nothing touches at the gap. Look at how the ends line up across the gap between front and rear doors.
Supplies
Soap, alcohol, lint-free cloths, painter's tape, a marker, a tape measure and a plastic tool. A helper is handy for holding longer pieces level. Work on a dry, mild day in the shade so the tape and the panels are at a moderate temperature.
Care
A day before the first wash. Mild soap and soft cloths after, and an occasional non-abrasive metal polish.
Blazer and Jimmy kit TH35193 carries UPC 691821255221; Quality Automotive Trims takes calls at 877-752-3811.
TH35193 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | TH35193 |
| UPC | 691821255221 |
| Part type | Rocker Panel Trim, Full Kit |
| Pieces in kit | 10 |
| Material | Polished 26-gauge 304 stainless steel |
| Finish | Polished to a mirror shine |
| Width | 5" |
| Coverage / notes | Spans from the bottom of the molding to the bottom of the door |
| Mounting | 3M automotive-grade acrylic foam tape; installs directly over the existing surface |
| Origin | Made in the USA |
| Fits | 1995-1997 Chevrolet Blazer and 1995-1997 GMC S-15 Jimmy |
Fitment: TH35193
| Vehicle | Years | Body style |
|---|---|---|
| Chevrolet Blazer | 1995-1997 | 4-door, SUV |
| GMC S-15 Jimmy | 1995-1997 | 4-door, SUV |
Fitment is listed exactly as QAA catalogs it. Confirm the body style as well as the year and model. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Other QAA trim cataloged for the Chevrolet Blazer
- TH35191: 6-piece Rocker Panel Trim, Full Kit
Check the body style on each listing; some kits are specific to one body style.
Installation tips: Rocker Panel Trim, Full Kit
- Unpack all 10 pieces and match each one to its position on the vehicle, using the product photos, before fitting any of them.
- Each piece mounts with 3M automotive-grade acrylic foam tape, so clean and dry the mounting surface first; the tape needs paint or trim free of dirt and wax.
- Align the piece and press it firmly into place directly over the existing surface, working along its full length so the tape bonds evenly.
- Fit one piece at a time and compare each with the product photos and the pieces already in place.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: TH35193 Rocker Panel Trim, Full Kit
Does TH35193 fit a 2-door Blazer?
No. It's tagged 4-door. The 2-door kit is TH35191.
Is the GMC S-15 Jimmy included in the fitment?
Yes, 1995-1997, 4-door SUV.
How many pieces?
Ten.
How wide?
5", from the bottom of the molding to the bottom of the door.
