Product Description
S-10 Blazer & S-15 Jimmy 2-Door Without Flares, 1993-1994: Ten-Piece Full Rocker Kit (TH33192)
TH33192 is the two-door, no-flares member of the 1993-1994 S-10 Blazer and S-15 Jimmy rocker family. The tag reads "2-door, SUV, NO Flares." The kit is ten pieces of polished stainless steel at 4.75", described as spanning "from the bottom of the molding to the bottom of the door."
NO Flares, in capitals
The record is direct about it. If your two-door SUV has flares, TH33191 is the linked kit tagged for that. This one is for trucks without them. Look at the wheel openings before ordering; if there's any aftermarket trim around them, check with us at 877-752-3811.
The family
TH33189 (4-door, flares), TH33191 (2-door, flares) and TH33193 (4-door, no flares tag) are the other three linked kits, all ten pieces at the same width. The tags are the only differences the data shows.
Specs
- Chevrolet S-10 Blazer & GMC S-15 Jimmy, 1993-1994
- 2-door, NO Flares
- A Full Kit of ten pieces
- 4.75" from the molding down to the door bottom
- Made in the USA of high-quality polished 304 stainless, 26 gauge
- Fixed over the Blazer or Jimmy's existing surface with 3M automotive-grade acrylic foam tape
QAA says the tape under the ten 2-door S-10 Blazer and S-15 Jimmy strips will hold for a lifetime with no damage to the paint.
Positions
The record doesn't describe where the ten pieces go on a two-door body. Lay them out side by side, compare each with the photos, and mark the liners.
Plain wheel openings
On a truck without flares, dry-fit the outermost pieces carefully and make sure they sit flat against the panel all the way to their ends.
Checking the molding
The molding sets the top line. Press along it, reattach loose sections, and make sure it's straight.
Paint prep
Wash, dry, and wipe the 4.75" band with isopropyl alcohol until clean cloths stay clean. On older paint, a painter's tape pull test shows whether it'll hold.
Install
Liner on to test fit; then peel, align under the molding, press and continue. Open and close each door afterward.
Matching
Keep the measured spacing the same on every door.
Previewing the look
Run a strip of painter's tape along the bottom of the molding and another 4.75" below it on one door. Step back and look at the band between them from the front corner. That's roughly the area the steel fills on the doors. The photos show how the remaining pieces sit.
If your truck has been repainted
Fresh paint needs time to cure before tape goes on it. If the lower sides were painted recently, ask the shop how long to wait, and do a painter's tape pull test before installing.
What you'll need
Have soap, isopropyl alcohol, cloths, painter's tape, a tape measure and a plastic tool ready.
Install day
Dry, mild weather, with the truck parked in shade; wait a day before washing. Later, a soft cloth and mild soap keep the steel bright, and a non-abrasive metal polish takes care of spots.
S-10 Blazer and S-15 Jimmy kit TH33192, UPC 691821631698. Questions go to Quality Automotive Trims, 877-752-3811.
TH33192 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | TH33192 |
| UPC | 691821631698 |
| Part type | Rocker Panel Trim, Full Kit |
| Pieces in kit | 10 |
| Material | Polished 26-gauge 304 stainless steel |
| Finish | Polished to a mirror shine |
| Width | 4.75" |
| Coverage / notes | Spans from the bottom of the molding to the bottom of the door |
| Mounting | 3M automotive-grade acrylic foam tape; installs directly over the existing surface |
| Origin | Made in the USA |
| Fits | 1993-1994 Chevrolet S-10 Blazer and 1993-1994 GMC S-15 Jimmy |
Fitment: TH33192
| Vehicle | Years | Body style |
|---|---|---|
| Chevrolet S-10 Blazer | 1993-1994 | 2-door, SUV, NO Flares |
| GMC S-15 Jimmy | 1993-1994 | 2-door, SUV, NO Flares |
| Chevrolet S-10 Blazer | 1993-1994 | 2-door, NO Flares |
| GMC S-15 Jimmy | 1993-1994 | 2-door, NO Flares |
Match the year, model, and body style in this table to your vehicle before ordering. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Other QAA trim cataloged for the Chevrolet S-10 Blazer
- TH33189: 10-piece Rocker Panel Trim, Full Kit
- TH33191: 10-piece Rocker Panel Trim, Full Kit
- TH33193: 10-piece Rocker Panel Trim, Full Kit
Check the body style on each listing; some kits are specific to one body style.
Installation tips: Rocker Panel Trim, Full Kit
- Unpack all 10 pieces and match each one to its position on the vehicle, using the product photos, before fitting any of them.
- Each piece mounts with 3M automotive-grade acrylic foam tape, so clean and dry the mounting surface first; the tape needs paint or trim free of dirt and wax.
- Align the piece and press it firmly into place directly over the existing surface, working along its full length so the tape bonds evenly.
- Fit one piece at a time and compare each with the product photos and the pieces already in place.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: TH33192 Rocker Panel Trim, Full Kit
Does TH33192 fit a Blazer with flares?
No. It's tagged NO Flares. TH33191 is the 2-door flares kit.
Is it for the 4-door?
No. It's tagged 2-door. TH33189 and TH33193 are the 4-door kits.
How tall?
4.75".
Which years?
1993-1994.
