Product Description
1993-1994 S-10 Blazer & S-15 Jimmy 4-Door with Flares: Ten-Piece 4.75" Rocker Kit (TH33189)
Four rocker kits are linked for the 1993-1994 Chevrolet S-10 Blazer and GMC S-15 Jimmy, and they're all ten pieces at 4.75". What separates them is door count and flares. TH33189 is the one tagged "4-door, SUV, w/ Flares." It's polished stainless steel, a Full Kit that "Spans from the bottom of the molding to the bottom of the door."
Finding your kit in the four
- 4-door with flares: TH33189 (this kit)
- 4-door, no flares tag: TH33193
- 2-door with flares: TH33191
- 2-door, NO Flares: TH33192
Count your doors, then look at the wheel openings. If both answers match this listing, you're in the right place. If you can't tell whether what you're seeing counts as flares, send a photo of a wheel opening to 877-752-3811.
GMC Jimmy owners
The title names the Chevrolet and the S-15 Jimmy, and both fitment rows carry the same years.
A second row
The record repeats the fitment as "4-door, w/ Flares" without the SUV tag. It reads as the same vehicles, but we mention it in case your paperwork describes the body differently.
The kit
QAA builds the ten S-10 Blazer and S-15 Jimmy pieces in the USA from polished 26 gauge 304 stainless steel; on the flared 4-door they sit over the current paint on 3M automotive-grade acrylic foam tape, which QAA states will hold for a lifetime without damage.
Four and three-quarter inches
That's the record's distance from the underside of the molding to the door bottom. Measure your front and rear doors to compare.
Flare clearance
The pieces closest to the wheels need the most attention during the dry-fit. Their ends should stop where the photos show and sit flat, not ride up onto the flare. Stop and call if they don't.
Ten on four doors
The record doesn't say how the ten pieces are divided, or whether some go beyond the doors. Lay them out, match them to the photos, and label each liner.
Prep
These SUVs have seen a lot of seasons. Wash the lower sides, then wipe the band with isopropyl alcohol, changing cloths often, until no residue comes off. Repair chips or flaking.
Mounting
Front door first. Tuck the top edge under the molding, liner still on, and check. Peel a short length, press, and continue. Open and close each door before moving on.
Blazer and Jimmy measurements
Copy measured positions from the first S-10 Blazer run to the second.
Supplies
For the Blazer or Jimmy, wash with car soap, prep with isopropyl alcohol and lint-free cloths, then lay out with painter's tape and a tape measure; a plastic tool lifts any old residue.
Before you peel anything
Hold a run of pieces in place with painter's tape and walk around the truck. Check the top edges against the molding, the ends against the flares, and the joints against the door gaps. Moving a taped piece costs nothing; moving a stuck one is a different story.
When
Dry, mild weather. A day before washing.
Not sure about flares or door count? Quality Automotive Trims, 877-752-3811. SKU TH33189, UPC 691821462063.
TH33189 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | TH33189 |
| UPC | 691821462063 |
| Part type | Rocker Panel Trim, Full Kit |
| Pieces in kit | 10 |
| Material | Polished 26-gauge 304 stainless steel |
| Finish | Polished to a mirror shine |
| Width | 4.75" |
| Coverage / notes | Spans from the bottom of the molding to the bottom of the door |
| Mounting | 3M automotive-grade acrylic foam tape; installs directly over the existing surface |
| Origin | Made in the USA |
| Fits | 1993-1994 Chevrolet S-10 Blazer and 1993-1994 GMC S-15 Jimmy |
Fitment: TH33189
| Vehicle | Years | Body style |
|---|---|---|
| Chevrolet S-10 Blazer | 1993-1994 | 4-door, SUV, w/ Flares |
| GMC S-15 Jimmy | 1993-1994 | 4-door, SUV, w/ Flares |
| Chevrolet S-10 Blazer | 1993-1994 | 4-door, w/ Flares |
| GMC S-15 Jimmy | 1993-1994 | 4-door, w/ Flares |
Match the year, model, and body style in this table to your vehicle before ordering. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Other QAA trim cataloged for the Chevrolet S-10 Blazer
- TH33191: 10-piece Rocker Panel Trim, Full Kit
- TH33192: 10-piece Rocker Panel Trim, Full Kit
- TH33193: 10-piece Rocker Panel Trim, Full Kit
Check the body style on each listing; some kits are specific to one body style.
Installation tips: Rocker Panel Trim, Full Kit
- Unpack all 10 pieces and match each one to its position on the vehicle, using the product photos, before fitting any of them.
- Each piece mounts with 3M automotive-grade acrylic foam tape, so clean and dry the mounting surface first; the tape needs paint or trim free of dirt and wax.
- Align the piece and press it firmly into place directly over the existing surface, working along its full length so the tape bonds evenly.
- Fit one piece at a time and compare each with the product photos and the pieces already in place.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: TH33189 Rocker Panel Trim, Full Kit
Does TH33189 fit a GMC S-15 Jimmy?
Yes. The 1993-1994 S-15 Jimmy is listed with the S-10 Blazer.
Does it fit a 2-door?
No. TH33191 and TH33192 are the 2-door kits.
What if my 4-door has no flares?
TH33193 is the 4-door kit without a flares tag.
How tall?
4.75".
