Product Description
Two-Door S-10 Blazer & S-15 Jimmy with Flares, 1993-1994: Rocker Kit, 10 Pieces at 4.75" (TH33191)
TH33191 is tagged for the two-door versions of the 1993-1994 Chevrolet S-10 Blazer and GMC S-15 Jimmy with flares: "2-door, SUV, w/ Flares." The kit is ten pieces of polished stainless steel, 4.75" wide, a Full Kit with the note "Spans from the bottom of the molding to the bottom of the door."
Ten pieces on a two-door
The record doesn't say how ten pieces are spread across a two-door body or whether any go beyond the doors, and it doesn't assign positions. Treat the product photos as the map. Lay the pieces out before doing anything else, and phone 877-752-3811 if any don't have an obvious home.
Two-door choices
Two linked two-door kits exist. This one is tagged w/ Flares. TH33192 is tagged NO Flares. Both are ten pieces at 4.75". The four-door kits are TH33189 (with flares) and TH33193 (no flares tag).
Recognizing flares
Flares are trim pieces around the wheel openings that sit out from the body. If your SUV has them, this tag fits. If you're unsure, a photo of one wheel opening is enough for us to help.
Material and attachment
The ten S-10 Blazer and S-15 Jimmy pieces are polished 26 gauge 304 stainless from the USA, held over the existing surface with 3M automotive-grade acrylic foam tape. According to QAA, the tape will hold for a lifetime without damaging the SUV.
Fitment, both names
Chevrolet S-10 Blazer and GMC S-15 Jimmy, 1993-1994, two-door. The title names the GMC as well. A second fitment row repeats the vehicles as "2-door, w/ Flares" without the SUV tag.
Measuring
Four and three-quarter inches from the molding to the door bottom. Check both doors, at the front and rear edge of each.
Ends near the wheels
Dry-fit the pieces nearest the flares first. They should finish where the photos show without pressing on the flare.
Cleaning
Soap, water, then isopropyl alcohol across the band. Work a cloth corner along the underside of the molding. Test older paint with painter's tape.
Install
Set each top edge under the molding, liner on. Peel and press in short runs. Swing the door through its travel after each door piece.
Even sides
Measure each joint as it goes on and keep the readings consistent.
Tools
Soap, isopropyl alcohol, cloths, painter's tape, tape measure, plastic tool.
Old paint
On a truck from these years, check lower panels for chips, touch-up spots or faded areas. Tape won't hold to paint that's already letting go, so press a strip of painter's tape on each suspect spot and pull it off quickly. Anything that lifts should be repaired and fully cured before the steel goes on.
When to call
If a piece won't sit flat, an end overlaps a flare, or you have leftover pieces after laying them all out, stop and phone with a photo.
Conditions
Mild and dry. About a day before washing.
Questions about this two-door kit? Quality Automotive Trims, 877-752-3811. SKU TH33191, UPC 691821486076.
TH33191 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | TH33191 |
| UPC | 691821486076 |
| Part type | Rocker Panel Trim, Full Kit |
| Pieces in kit | 10 |
| Material | Polished 26-gauge 304 stainless steel |
| Finish | Polished to a mirror shine |
| Width | 4.75" |
| Coverage / notes | Spans from the bottom of the molding to the bottom of the door |
| Mounting | 3M automotive-grade acrylic foam tape; installs directly over the existing surface |
| Origin | Made in the USA |
| Fits | 1993-1994 Chevrolet S-10 Blazer and 1993-1994 GMC S-15 Jimmy |
Fitment: TH33191
| Vehicle | Years | Body style |
|---|---|---|
| Chevrolet S-10 Blazer | 1993-1994 | 2-door, SUV, w/ Flares |
| GMC S-15 Jimmy | 1993-1994 | 2-door, SUV, w/ Flares |
| Chevrolet S-10 Blazer | 1993-1994 | 2-door, w/ Flares |
| GMC S-15 Jimmy | 1993-1994 | 2-door, w/ Flares |
Fitment is listed exactly as QAA catalogs it. Confirm the body style as well as the year and model. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Other QAA trim cataloged for the Chevrolet S-10 Blazer
- TH33189: 10-piece Rocker Panel Trim, Full Kit
- TH33192: 10-piece Rocker Panel Trim, Full Kit
- TH33193: 10-piece Rocker Panel Trim, Full Kit
Check the body style on each listing; some kits are specific to one body style.
Installation tips: Rocker Panel Trim, Full Kit
- Unpack all 10 pieces and match each one to its position on the vehicle, using the product photos, before fitting any of them.
- Each piece mounts with 3M automotive-grade acrylic foam tape, so clean and dry the mounting surface first; the tape needs paint or trim free of dirt and wax.
- Align the piece and press it firmly into place directly over the existing surface, working along its full length so the tape bonds evenly.
- Fit one piece at a time and compare each with the product photos and the pieces already in place.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: TH33191 Rocker Panel Trim, Full Kit
Is TH33191 for a 2-door?
Yes. It's tagged 2-door, SUV, w/ Flares.
My 2-door has no flares. Which kit?
TH33192 is the 2-door NO Flares kit.
Does it fit the GMC Jimmy?
Yes. The S-15 Jimmy 1993-1994 is listed.
How many pieces?
Ten.
