Product Description
Ten-Piece 5.5" Full Rocker Kit, 1990-1992 Chevrolet S-10 Blazer & GMC S-15 Jimmy (TH30193)
TH30193 lists two nameplates: the Chevrolet S-10 Blazer and the GMC S-15 Jimmy, both 1990 through 1992. It's a ten-piece polished stainless steel Full Kit at 5.5", with the note "Spans from the bottom of the molding to the bottom of the door." The title names both, so Jimmy owners can see they're included.
A tagging question first
The fitment data has two rows with the same vehicles and years. One is tagged 4-door SUV; the other is tagged 4-door pickup truck. The listing doesn't explain the second tag, and we won't read anything into it. If you own a pickup and are wondering whether this kit is meant for it, call 877-752-3811 before ordering. Owners of the 4-door SUV are covered by the first row.
The coverage
The steel runs from the bottom of the side molding down to the bottom of each door, 5.5" tall. Measure that span on your own doors before buying.
Ten pieces, positions unlisted
The record doesn't describe where each of the ten pieces goes. Sort them by length and shape, compare with the photos, and tag each liner with its spot before you clean anything.
Steel and tape
- S-10 Blazer/S-15 Jimmy steel: polished 304 stainless, 26 gauge
- American-built for the S-10 and S-15
- Mounts with 3M automotive-grade acrylic foam tape
- Goes over the existing surface
According to QAA, the tape holding the S-10 Blazer and S-15 Jimmy pieces will hold for a lifetime with no damage to the paint.
Preparing older paint
These trucks have been through a lot of seasons. Wash the lower doors, then strip old wax and dressing with isopropyl alcohol, changing cloths until they stay clean. Any flaking or bubbled paint in the band needs attention before the tape goes on.
Molding first
Because the top of the kit meets the molding, the molding sets the line. Push along it; loose or bent sections should be fixed first, or the steel will copy every wave in it.
Install, door by door
Dry-fit with liners on. Peel a short section, press it in place, then work along while pulling the liner. Close the door gently after each piece and listen for rubbing.
Clearance around the wheels
When dry-fitting, check that each end piece stops where the photos show and doesn't press into a curve it wasn't shaped for. If an end looks off, stop and call rather than bending it.
What you'll need
Soap and water, isopropyl alcohol, clean cloths, painter's tape, a tape measure, and patience. Allow a few hours for ten pieces, and keep the pieces sorted by position so they stay in order. Finish a run, measure where the edges sit, and keep the rest consistent with those numbers.
No linked parts
Nothing else is attached to this listing. Ask us about other trim for these trucks.
Weather and care
Install on a dry, mild day, wait about a day to wash, and use non-abrasive polish only.
1990-1992 S-10 Blazer and S-15 Jimmy set TH30193, UPC 691821621392: Quality Automotive Trims, 877-752-3811.
TH30193 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | TH30193 |
| UPC | 691821621392 |
| Part type | Rocker Panel Trim, Full Kit |
| Pieces in kit | 10 |
| Material | Polished 26-gauge 304 stainless steel |
| Finish | Polished to a mirror shine |
| Width | 5.5" |
| Coverage / notes | Spans from the bottom of the molding to the bottom of the door |
| Mounting | 3M automotive-grade acrylic foam tape; installs directly over the existing surface |
| Origin | Made in the USA |
| Fits | 1990-1992 Chevrolet S-10 Blazer and 1990-1992 GMC S-15 Jimmy |
Fitment: TH30193
| Vehicle | Years | Body style |
|---|---|---|
| Chevrolet S-10 Blazer | 1990-1992 | 4-door, SUV |
| GMC S-15 Jimmy | 1990-1992 | 4-door, SUV |
| Chevrolet S-10 Blazer | 1990-1992 | 4-door, Pickup Truck |
| GMC S-15 Jimmy | 1990-1992 | 4-door, Pickup Truck |
Match the year, model, and body style in this table to your vehicle before ordering. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Installation tips: Rocker Panel Trim, Full Kit
- Unpack all 10 pieces and match each one to its position on the vehicle, using the product photos, before fitting any of them.
- Each piece mounts with 3M automotive-grade acrylic foam tape, so clean and dry the mounting surface first; the tape needs paint or trim free of dirt and wax.
- Align the piece and press it firmly into place directly over the existing surface, working along its full length so the tape bonds evenly.
- Fit one piece at a time and compare each with the product photos and the pieces already in place.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: TH30193 Rocker Panel Trim, Full Kit
Does TH30193 fit a GMC S-15 Jimmy?
Yes, the fitment lists the S-15 Jimmy 1990-1992 alongside the S-10 Blazer.
Why is there a pickup truck row?
The listing doesn't explain it. Call 877-752-3811 if you own a pickup.
How tall is the steel?
5.5", from the molding to the bottom of the door.
How many pieces?
Ten.
Will it fit a 2-door?
Both rows are tagged 4-door. Call us about other body styles.
