Product Description
Chevrolet Blazer & GMC S-15 Jimmy 2-Door 1995-1997 Rocker Trim, Six-Piece Full Kit, 5" (TH35191)
TH35191 is the two-door kit: six pieces of polished stainless steel for the 1995-1997 Chevrolet Blazer and GMC S-15 Jimmy, tagged "2-door, SUV." It's a Full Kit, 5" wide, and "Spans from the bottom of the molding to the bottom of the door."
Count your doors first
The linked TH35193 has the same 5" width and the same span note but ten pieces and a 4-door tag. Everything else about the two records matches, so the door count is the whole decision. Two doors: this page. Four doors: TH35193.
Six pieces, two doors
The record doesn't describe which pieces go where, or whether any extend beyond the doors. Lay them out on a clean surface, compare them with the photos, and write a position on each liner before you begin. Don't mix them with pieces from another kit.
For the GMC
The title names the Chevrolet Blazer and the GMC S-15 Jimmy. The fitment row lists the Jimmy for 1995-1997 with the same 2-door SUV tag.
Five inches below the molding
Measure from the bottom of the molding to the bottom of each door, near the front and near the rear. A reading close to 5" matches the record. If the number is clearly different, or your doors have no molding, call 877-752-3811 before ordering.
Material
Blazer/Jimmy steel: polished 304 stainless, 26 gauge, high grade, built in the USA.
How it attaches
The pieces mount with 3M automotive-grade acrylic foam tape and go over the existing surface. The record describes no hardware. QAA states the tape will hold for a lifetime without causing any damage to the surface of the vehicle.
Before cleaning, check the molding
The molding sets the top line of every piece. Press along it from end to end on both doors. Loose sections should be reattached first; the steel will follow whatever the molding does.
Cleaning
Soap and water to lift the dirt, a full dry, then isopropyl alcohol over the band. Wipe until a fresh cloth shows nothing. Fix chips and let the paint cure before installing.
Laying on each piece
With the liner still on, hold the piece in position and check both edges. Then peel back a few inches, tuck the top edge against the molding, and press. Keep pulling the liner and smoothing toward the far end. A final firm pass seats it.
Where each Blazer piece begins
Measure where each piece starts and ends, and keep those positions consistent.
Supplies
Before starting on the Blazer or Jimmy, gather mild soap, isopropyl alcohol, lint-free cloths, painter's tape, a marker, a tape measure and a plastic trim tool.
Conditions
Pick a dry, mild day and work in the shade. Tape bonds best when the steel and the paint are both at a moderate temperature, so let a sun-warmed truck cool first, and bring a cold kit indoors for a while before you start.
Care
No wash for a day. Afterward, mild soap and a soft cloth on the Blazer.
1995-1997 Blazer and Jimmy set TH35191, UPC 691821414673: Quality Automotive Trims, 877-752-3811.
TH35191 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | TH35191 |
| UPC | 691821414673 |
| Part type | Rocker Panel Trim, Full Kit |
| Pieces in kit | 6 |
| Material | Polished 26-gauge 304 stainless steel |
| Finish | Polished to a mirror shine |
| Width | 5" |
| Coverage / notes | Spans from the bottom of the molding to the bottom of the door |
| Mounting | 3M automotive-grade acrylic foam tape; installs directly over the existing surface |
| Origin | Made in the USA |
| Fits | 1995-1997 Chevrolet Blazer and 1995-1997 GMC S-15 Jimmy |
Fitment: TH35191
| Vehicle | Years | Body style |
|---|---|---|
| Chevrolet Blazer | 1995-1997 | 2-door, SUV |
| GMC S-15 Jimmy | 1995-1997 | 2-door, SUV |
Match the year, model, and body style in this table to your vehicle before ordering. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Other QAA trim cataloged for the Chevrolet Blazer
- TH35193: 10-piece Rocker Panel Trim, Full Kit
Check the body style on each listing; some kits are specific to one body style.
Installation tips: Rocker Panel Trim, Full Kit
- Unpack all 6 pieces and match each one to its position on the vehicle, using the product photos, before fitting any of them.
- Each piece mounts with 3M automotive-grade acrylic foam tape, so clean and dry the mounting surface first; the tape needs paint or trim free of dirt and wax.
- Align the piece and press it firmly into place directly over the existing surface, working along its full length so the tape bonds evenly.
- Fit one piece at a time and compare each with the product photos and the pieces already in place.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: TH35191 Rocker Panel Trim, Full Kit
Does TH35191 fit a 4-door Blazer?
No, it's tagged 2-door. The 4-door kit is TH35193.
Does it fit the GMC S-15 Jimmy?
Yes, the 1995-1997 S-15 Jimmy 2-door is in the fitment.
How tall is it?
5", from the bottom of the molding to the bottom of the door.
How many pieces?
Six.
