Product Description
Chevrolet Trailblazer 2006-2007 Side Molding Insert Kit "w/ Trim Crease," 2", 4 Pieces (TH47165)
TH47165 is listed for the Chevrolet Trailblazer four-door SUV, 2006-2007. It's four polished stainless steel pieces, 2" wide, with two notes: "w/ trim crease" and "Side Molding." The part name is "Rocker Panel Trim," and the included-items line calls it an "Insert Kit."
What "w/ trim crease" tells you, and what it doesn't
The record says the inserts come "w/ trim crease" but doesn't define the term or say where the crease falls. Treat it as a reason to check shape as well as width. Compare the product photos with a close look at your molding. If the profile doesn't match, call 877-752-3811 before ordering.
A short window
The fitment covers two model years, 2006 and 2007. If your Trailblazer is from another year, this record doesn't list it.
No linked records
TH47165 has no siblings. No other Trailblazer rocker kit, pillar set or accessory is linked to it here.
Checking the molding
The inserts sit on the side molding, so the molding must be on every door and firmly attached. Measure its face; it should be close to two inches. Look at its cross-section too, given the crease note.
Material
The four creased Trailblazer inserts are polished 26 gauge 304 stainless steel made in the USA. They go onto the existing side molding with 3M automotive-grade acrylic foam tape. According to QAA, the tape will hold for a lifetime without harming the SUV.
Strip prep
Wash the molding with soapy water, rinse, dry, and wipe with isopropyl alcohol, working the cloth into any ridge or groove so no dressing remains.
Fitting
Hold an insert on its strip with painter's tape and check that the crease lines up with the molding along the full length. Only then peel a short section of liner, set one end, and press along as the liner comes away. Finish with firm pressure, paying attention to both sides of the crease.
Four pieces
The data doesn't map them to doors. Match them to the product photos and label each liner.
Across the door gap
Front and rear inserts should meet at the same height and the crease should line up across the gap.
After
Open each door to check clearance. Wait a day before washing; then mild soap and a soft cloth.
Conditions
Fit the Trailblazer on a dry, mild day or in a garage.
What to send when you call
Year, a photo of the full side, and a close side-on shot of the molding showing its profile.
Before ordering
A Trailblazer four-door from 2006 or 2007, molding on all four doors, a strip about two inches across, and a profile that looks like the one in the product photos. If those four line up, this is the record for your SUV.
A helper
A second pair of hands keeps the far end of each insert off the strip while you line up the crease at the near end.
Trailblazer spacing
Measure each Trailblazer insert from the door edges and keep the positions consistent.
For the 2006-2007 Trailblazer, ask about TH47165 (UPC 691821521760) at 877-752-3811, Quality Automotive Trims.
TH47165 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | TH47165 |
| UPC | 691821521760 |
| Part type | Rocker Panel Trim |
| Pieces in kit | 4 |
| Material | Polished 26-gauge 304 stainless steel |
| Finish | Polished to a mirror shine |
| Width | 2" |
| Coverage / notes | W/ trim crease; Side Molding |
| Mounting | 3M automotive-grade acrylic foam tape; installs directly over the existing surface |
| Origin | Made in the USA |
| Fits | 2006-2007 Chevrolet Trailblazer |
Fitment: TH47165
| Vehicle | Years | Body style |
|---|---|---|
| Chevrolet Trailblazer | 2006-2007 | 4-door, SUV |
Check your vehicle against every column here: year range, model, and body style all have to match. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Installation tips: Rocker Panel Trim
- Unpack all 4 pieces and match each one to its position on the vehicle, using the product photos, before fitting any of them.
- Each piece mounts with 3M automotive-grade acrylic foam tape, so clean and dry the mounting surface first; the tape needs paint or trim free of dirt and wax.
- Align the piece and press it firmly into place directly over the existing surface, working along its full length so the tape bonds evenly.
- Fit one piece at a time and compare each with the product photos and the pieces already in place.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: TH47165 Rocker Panel Trim
What does TH47165 fit?
The Chevrolet Trailblazer four-door SUV, 2006-2007.
What does "w/ trim crease" mean?
The record doesn't define it. Compare the photos with your molding or call 877-752-3811.
Where do the inserts go?
On the side molding. They're 2" wide.
How many pieces?
Four.
