Product Description
Chevrolet Impala 2006-2013 & Impala Limited 2014-2016 Upper Rocker Kit, 3.5", 6 Pieces (TH46135)
TH46135 is an Upper Kit for the Chevrolet Impala four-door sedan, 2006-2013, and the Chevrolet Impala Limited, 2014-2016. Six polished stainless steel pieces, 3.5" wide, spanning "from the bottom of the molding DOWN to the specified width."
Two fitment rows, one difference
The record lists the same nameplates and years twice. One row is tagged "4-door, Sedan," the other "4-door, Sedan, Limited." The data doesn't explain whether that second "Limited" refers to the Impala Limited nameplate already named in the row or to a trim level. Either way, both rows point to this same kit, so a four-door Impala from 2006-2013 or an Impala Limited from 2014-2016 is covered. If your car is outside those years, call 877-752-3811.
Starts at the molding
The top edge of each piece sits at the bottom of your side molding, and the steel runs 3.5" down from there. That means the molding needs to be on every door and firmly attached, and there should be about three and a half inches of door below it. Measure a front and a rear door before ordering.
Insert kit companion
The linked TH46136 is a four-piece Insert Kit, 1.67", that goes on the molding itself. This Upper Kit covers the paint directly beneath it. The catalog doesn't say whether they're designed to be paired; ask at 877-752-3811 if you'd like both.
Six pieces
The data doesn't map six pieces to four doors. Sort them with the product photos and label the liners.
Material
The six Impala and Impala Limited pieces are polished 26 gauge 304 stainless steel from the USA. They fit below the molding over the existing surface with 3M automotive-grade acrylic foam tape, and QAA states the tape will hold for a lifetime without damage.
Prep
Wash, rinse and dry the doors. Wipe the band below the molding with isopropyl alcohol, getting into the corner where molding and paint meet. Re-secure any loose molding; it isn't included.
Install
Tape each piece in place with painter's tape, its top edge against the molding. Step back and check. Peel a few inches of liner, set one end, press along as the rest comes out, and finish with firm pressure.
Line check
The top edges should follow the molding across both door gaps. Open each door to check clearance.
Other linked Impala parts
FV46135 front vent and fog light trim, GC46135 gas door cover, PP46135 and PP46136 pillar post kits, RD46135 rear deck accent at 2", and WQ46135 wheel well accent trim.
Care
Leave the Impala a day before washing, then use mild soap and a soft mitt.
Weather
Fit the Impala trim in dry, mild weather or a garage.
What to send if you call
Year, nameplate as shown on the car, and a photo of the full side showing the molding.
Before ordering
A four-door Impala in the listed years, molding on all four doors, and roughly three and a half inches of paint below it. If that matches, this is the record.
Questions on Impala kit TH46135 (UPC 691821255252)? Quality Automotive Trims, 877-752-3811.
TH46135 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | TH46135 |
| UPC | 691821255252 |
| Part type | Rocker Panel Trim, Upper Kit |
| Pieces in kit | 6 |
| Material | Polished 26-gauge 304 stainless steel |
| Finish | Polished to a mirror shine |
| Width | 3.5" |
| Coverage / notes | Spans from the bottom of the molding DOWN to the specified width |
| Mounting | 3M automotive-grade acrylic foam tape; installs directly over the existing surface |
| Origin | Made in the USA |
| Fits | 2006-2013 Chevrolet Impala and 2014-2016 Chevrolet Impala Limited |
Fitment: TH46135
| Vehicle | Years | Body style |
|---|---|---|
| Chevrolet Impala | 2006-2013 | 4-door, Sedan |
| Chevrolet Impala Limited | 2014-2016 | 4-door, Sedan |
| Chevrolet Impala | 2006-2013 | 4-door, Sedan, Limited |
| Chevrolet Impala Limited | 2014-2016 | 4-door, Sedan, Limited |
Fitment is listed exactly as QAA catalogs it. Confirm the body style as well as the year and model. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Other QAA trim cataloged for the Chevrolet Impala
- FV46135: 2-piece Front Vent and Fog Light Trim
- GC46135: 1-piece Gas Door Cover Trim
- PP46135: 4-piece Pillar Post Trim
- PP46136: 6-piece Pillar Post Trim
- RD46135: 1-piece Rear Deck Accent
- TH46136: 4-piece Rocker Panel Trim, Insert Kit
- WQ46135: 8-piece Wheel Well Accent Trim
Check the body style on each listing; some kits are specific to one body style.
Installation tips: Rocker Panel Trim, Upper Kit
- Unpack all 6 pieces and match each one to its position on the vehicle, using the product photos, before fitting any of them.
- Each piece mounts with 3M automotive-grade acrylic foam tape, so clean and dry the mounting surface first; the tape needs paint or trim free of dirt and wax.
- Align the piece and press it firmly into place directly over the existing surface, working along its full length so the tape bonds evenly.
- Fit one piece at a time and compare each with the product photos and the pieces already in place.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: TH46135 Rocker Panel Trim, Upper Kit
What does TH46135 fit?
Chevrolet Impala 2006-2013 and Chevrolet Impala Limited 2014-2016, four-door sedans.
Where does it go?
From the bottom of the side molding down 3.5".
What does the second "Limited" tag mean?
The record doesn't define it. Both rows list this kit. Call 877-752-3811 with questions.
Is molding included?
No.
What's TH46136?
The linked four-piece 1.67" insert kit for the molding itself.
