Product Description
Mercury Sable 1992-1995 Sedan Rocker Trim, Eight Pieces, 7.125" Full Kit (TH32660)
TH32660 is an eight-piece polished stainless steel Full Kit for the Mercury Sable 4-door sedan, 1992 through 1995. The listed width is 7.125", and the only span note is "Spans from the bottom of the molding to the bottom of the door." No parts are linked to it.
Sedan only
The fitment row names the 4-door sedan. If your Sable has a different body style, this record doesn't cover it; call 877-752-3811 to ask about other options.
The measurement to take
Seven and one-eighth inches from the underside of the molding to the bottom of the door is what the kit is described as filling. Measure a front door and a rear door on your car. Close readings mean the record lines up with your doors; a big difference means a call before you order.
From the catalog
Mercury's 1992-1995 Sable sedan gets eight 7.125" pieces that QAA cuts in the USA from polished 26 gauge 304 stainless, set from molding to door bottom with 3M automotive-grade acrylic foam tape. Per QAA, the tape will hold for a lifetime without harm to the car.
What a Full Kit does here
The steel covers the lower part of each door between the molding and the bottom edge, so the painted area below the molding becomes polished trim. The record doesn't say whether any pieces continue past the doors. The product photos show the layout.
Laying out eight pieces
Sort the pieces by shape, then match each to a door with the photos. Write the position on the liner.
Paint condition
Check a car this age for layers of old wax and fading. Wash, dry, then wipe the band with isopropyl alcohol until a clean cloth stays clean. If the cloth picks up color, the paint is oxidized; a light polish followed by another alcohol wipe gives the tape a better surface. Test with painter's tape.
Checking the molding
Press along each door's molding. Reattach any loose section before you begin, since the top of every piece follows it and a lifted molding end would show as a step in the polished steel.
Install steps
- Dry-fit the piece, liner on, between molding and door bottom.
- Peel a few inches from the front end.
- Align and press.
- Draw the liner out as you press along.
- Finish with a firm cloth pass.
Door clearance
Open and close each door gently after its piece is on.
Even sides
Measure as you go and keep the positions consistent. Look along the car from the front bumper; the top edges should follow the molding exactly.
Supplies
Car soap, isopropyl alcohol, a stack of lint-free cloths, painter's tape, a tape measure, a plastic tool, and a mild polish if the paint is oxidized.
Before you call
Have the model year, body style, and your molding-to-door-bottom measurement ready. A photo of the car's side helps too.
Timing
Install the Sable trim in dry, mild weather; about a day before washing, then non-abrasive polish.
The Sable kit TH32660 carries UPC 691821577781; questions go to 877-752-3811.
TH32660 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | TH32660 |
| UPC | 691821577781 |
| Part type | Rocker Panel Trim, Full Kit |
| Pieces in kit | 8 |
| Material | Polished 26-gauge 304 stainless steel |
| Finish | Polished to a mirror shine |
| Width | 7.125" |
| Coverage / notes | Spans from the bottom of the molding to the bottom of the door |
| Mounting | 3M automotive-grade acrylic foam tape; installs directly over the existing surface |
| Origin | Made in the USA |
| Fits | 1992-1995 Mercury Sable |
Fitment: TH32660
| Vehicle | Years | Body style |
|---|---|---|
| Mercury Sable | 1992-1995 | 4-door, Sedan |
Fitment is listed exactly as QAA catalogs it. Confirm the body style as well as the year and model. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Installation tips: Rocker Panel Trim, Full Kit
- Unpack all 8 pieces and match each one to its position on the vehicle, using the product photos, before fitting any of them.
- Each piece mounts with 3M automotive-grade acrylic foam tape, so clean and dry the mounting surface first; the tape needs paint or trim free of dirt and wax.
- Align the piece and press it firmly into place directly over the existing surface, working along its full length so the tape bonds evenly.
- Fit one piece at a time and compare each with the product photos and the pieces already in place.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: TH32660 Rocker Panel Trim, Full Kit
Which Sable does TH32660 fit?
The 1992-1995 Mercury Sable 4-door sedan.
How tall is it?
7.125", from the bottom of the molding to the bottom of the door.
How many pieces?
Eight.
Is anything linked?
No parts are linked to this listing.
