Product Description
Hyundai Sonata 1992-1995 Sedan Full Kit TH95361, 7.25"-9" Tapered, 8 Pieces
QAA's TH95361 is the eight-piece polished stainless Full Kit for the 1992-1995 Hyundai Sonata sedan, covering "from the bottom of the molding to the bottom of the door" with a tapered width given as 7.25" to 9".
Covering the whole space
Where the linked Upper Kit, TH95360, covers a 4" band beneath the molding, this Full Kit fills everything from the molding down to the door bottom. Both have eight pieces. Choose this one if you want the lower door covered top to bottom.
A big taper
The height changes by an inch and three-quarters along each piece, from 7.25" to 9". The record doesn't say which end is taller. So:
- Measure the molding-to-door-bottom gap near the front, middle and rear of each door
- Note which end of each door reads taller
- Match each piece's taller end to it during the dry fit
- Label the direction on each liner
Readings outside 7.25" to 9" are worth a call to 877-752-3811 before ordering.
Material
The Sonata Full Kit is made in the USA from polished 26 gauge 304 stainless steel and goes on over the existing finish with 3M automotive-grade acrylic foam tape. According to QAA, the tape will hold for a lifetime with no damage to the surface.
Cleaning a tall band
Up to 9" of paint sits under each piece. Wash and rinse, strip wax from the whole band with a wax-and-grease remover, repair chips or rust, and wipe with isopropyl alcohol just before fitting.
Molding
Every Sonata piece's top edge sits against the molding, so fix any loose or cracked molding before you start.
Eight pieces
Positions aren't listed. Sort the eight pieces with the photos.
Bonding
Peel a few inches of liner at a time and press across the full height, especially at the tall end. Finish with firm pressure.
Rest of the Sonata kit
Keep the gaps and taper direction consistent with the photos on every Sonata piece.
Weather
Mild, dry, shaded. Hold off washing for a day.
Choosing between the two
If you would like a slim polished line under the molding and the rest of the door left as it is, the Upper Kit does that. If you want the whole band from the molding to the door bottom covered, this is the kit. Both start at the molding, so it needs to be sound either way.
Dry fit
Tape each piece up with painter's tape, taller end where your readings were taller, and open all four doors. Look along the side from the front and rear before peeling anything.
One door first
Finish one door, step back and check the line, then carry on. Sort the pieces on a soft towel so the polished faces stay unmarked, and keep the box until every piece is on.
If a door reads differently
If one door's readings don't follow the pattern of the others, check whether that door or its molding has been replaced, and send its figures separately.
Measurements ready? Call 877-752-3811 about Sonata Full Kit TH95361, UPC 691821483716.
TH95361 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | TH95361 |
| UPC | 691821483716 |
| Part type | Rocker Panel Trim, Full Kit |
| Pieces in kit | 8 |
| Material | Polished 26-gauge 304 stainless steel |
| Finish | Polished to a mirror shine |
| Width | 7.25" to 9" tapered |
| Coverage / notes | Spans from the bottom of the molding to the bottom of the door |
| Mounting | 3M automotive-grade acrylic foam tape; installs directly over the existing surface |
| Origin | Made in the USA |
| Fits | 1992-1995 Hyundai Sonata |
Fitment: TH95361
| Vehicle | Years | Body style |
|---|---|---|
| Hyundai Sonata | 1992-1995 | 4-door, Sedan |
Fitment is listed exactly as QAA catalogs it. Confirm the body style as well as the year and model. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Other QAA trim cataloged for the 1992-1995 Hyundai Sonata
- TH95360: 8-piece Rocker Panel Trim, Upper Kit
Check the body style on each listing; some kits are specific to one body style.
Installation tips: Rocker Panel Trim, Full Kit
- Unpack all 8 pieces and match each one to its position on the vehicle, using the product photos, before fitting any of them.
- Each piece mounts with 3M automotive-grade acrylic foam tape, so clean and dry the mounting surface first; the tape needs paint or trim free of dirt and wax.
- Align the piece and press it firmly into place directly over the existing surface, working along its full length so the tape bonds evenly.
- Fit one piece at a time and compare each with the product photos and the pieces already in place.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: TH95361 Rocker Panel Trim, Full Kit
Which Sonata does TH95361 fit?
The 1992-1995 Hyundai Sonata 4-door sedan.
How wide is it?
Tapered, 7.25" to 9", molding to door bottom.
Is there an Upper Kit?
Yes, TH95360, 4" down from the molding.
How many pieces?
Eight.
