Product Description
Hyundai Excel Sedan 1990-1992 Upper Kit TH90345, 4.75", Between the Wheel Wells, 8 Pieces
TH90345 is an eight-piece Upper Kit in polished stainless steel for the 1990-1992 Hyundai Excel 4-door sedan. Its width bullet reads "4.75" Width, Includes coverage between the wheel wells only," and it spans "from the bottom of the molding DOWN to the specified width."
Between the wheel wells
The length note limits the coverage to the stretch between the front and rear wheel wells. If you want the trim to continue to the bumpers, the record has a separate kit for that.
The Full Length partner
TH90347 is the linked twelve-piece Upper Kit for the same sedan, also 4.75". Its note reads "Full Length, Includes coverage from the Wheel Wells to the bumper, both front and rear." The height is the same; the Full Length kit has four more pieces and reaches the bumpers.
- TH90345: 8 pieces, between the wheel wells (this kit)
- TH90347: 12 pieces, wheel wells to the bumpers front and rear
Years
The fitment for this sedan kit runs 1990-1992. If your Excel sedan is a later year, call 877-752-3811 before ordering.
Steel and tape
Built for the 1990-1992 Excel sedan, eight 4.75" strips of polished 26 gauge 304 stainless from a USA shop fill the space between the wheel wells under the molding, held with 3M automotive-grade acrylic foam tape. QAA states the tape will hold for a lifetime without harm.
Marking the height
Measure 4.75" down from the lower edge of the molding on each door and run a strip of masking tape along it. That's the bottom edge of the trim. If it passes the door bottom, send us a photo.
The molding matters
The top edge of each piece sits against the molding, so it needs to be straight and secure along all four doors. Repair any loose or cracked section first.
Prep
- Wash the Excel under its molding and rinse
- Lift off wax using wax-and-grease remover
- Fix any chips or rust, then allow the repair to cure
- Alcohol-wipe each Excel panel just before its piece goes on
Eight pieces
The record doesn't say how the eight Excel pieces are laid out. Use the photos and number each liner.
Trial fit
Tape each piece up with painter's tape, top edge under the molding. Check the ends near the wheel wells and open every door.
Bonding
Peel a short length of liner, press, and continue to the end. Then go over the whole piece again.
After the first pieces
Keep the spacing even across all eight Excel pieces.
Weather
Shade, mild temperature, dry air. Then a day without a wash.
Ordering
Send your year and tell us whether you want coverage past the wheel wells.
If you change your mind later
The two kits share a height, but the record doesn't say whether the end sections of the Full Length kit can be bought on their own. If you think you may want bumper-to-bumper coverage, decide before ordering, or call us to ask.
Keep every liner on until the whole dry fit looks correct.
Call 877-752-3811 for Excel kit TH90345; its UPC is 691821315277.
TH90345 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | TH90345 |
| UPC | 691821315277 |
| Part type | Rocker Panel Trim, Upper Kit |
| Pieces in kit | 8 |
| Material | Polished 26-gauge 304 stainless steel |
| Finish | Polished to a mirror shine |
| Width | 4.75" |
| Coverage / notes | Includes coverage between the wheel wells only; Spans from the bottom of the molding DOWN to the specified width |
| Mounting | 3M automotive-grade acrylic foam tape; installs directly over the existing surface |
| Origin | Made in the USA |
| Fits | 1990-1992 Hyundai Excel |
Fitment: TH90345
| Vehicle | Years | Body style |
|---|---|---|
| Hyundai Excel | 1990-1992 | 4-door, Sedan |
Fitment is listed exactly as QAA catalogs it. Confirm the body style as well as the year and model. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Other QAA trim cataloged for the 1990-1992 Hyundai Excel
- TH90347: 12-piece Rocker Panel Trim, Upper Kit
Check the body style on each listing; some kits are specific to one body style.
Installation tips: Rocker Panel Trim, Upper Kit
- Unpack all 8 pieces and match each one to its position on the vehicle, using the product photos, before fitting any of them.
- Each piece mounts with 3M automotive-grade acrylic foam tape, so clean and dry the mounting surface first; the tape needs paint or trim free of dirt and wax.
- Align the piece and press it firmly into place directly over the existing surface, working along its full length so the tape bonds evenly.
- Fit one piece at a time and compare each with the product photos and the pieces already in place.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: TH90345 Rocker Panel Trim, Upper Kit
Which Excel does TH90345 fit?
The 1990-1992 Hyundai Excel 4-door sedan.
Does it reach the bumpers?
No, it covers between the wheel wells only. TH90347 is the Full Length kit.
How wide is it?
4.75", from the bottom of the molding down.
How many pieces?
Eight.
