Product Description
TH90347 Hyundai Excel 1990-1992 Sedan Full Length Upper Rocker Kit, 4.75", 12 Pieces
For the 1990-1992 Hyundai Excel 4-door sedan, TH90347 is a twelve-piece Upper Kit in polished stainless steel. The bullet reads "4.75" Width, Full Length, Includes coverage from the Wheel Wells to the bumper, both front and rear," and the kit "Spans from the bottom of the molding DOWN to the specified width."
Full Length coverage
Where the eight-piece TH90345 stops at the wheel wells, this kit keeps going: its note lists coverage from the wheel wells to the bumper, at the front and at the rear. It also has four more pieces; the record doesn't say how they divide.
Same height
Both Excel sedan kits are 4.75" from the molding down, so the lower line is the same height on either. The choice is only about length:
- Want trim only along the doors and between the wheel wells? TH90345.
- Want it to run from bumper to bumper, past the wheel wells? This kit.
Twelve pieces
The record doesn't list which piece goes where. Lay all twelve out, match each to the photos, and label every liner front, middle or rear before you start.
Material
The full-length 1990-1992 Excel kit is twelve 4.75" strips of USA-made polished 26 gauge 304 stainless, carried from the wheel wells to the bumpers on 3M automotive-grade acrylic foam tape. QAA states the tape will hold for a lifetime without harming the Hyundai sedan.
Checking the line
Mark 4.75" below the molding with masking tape, from the front bumper to the rear bumper. Step back and look. If the mark leaves the panel anywhere along the length, send us a photo before ordering.
Molding
The top of every piece meets the molding, so it must be present and secure along the full length you're covering. Repair any loose sections first.
Cleaning
Wash the whole band from bumper to bumper. Strip wax with a wax-and-grease remover, fix chips or rust, and wipe with isopropyl alcohol just before fitting. Clean around the wheel well edges carefully, where dirt collects.
Order of fitting
Dry fit the door pieces first, then the sections toward each bumper, so the joints line up. Open every door to check clearance.
Bonding
Peel a few inches of liner at a time and press firmly. Finish each piece with pressure along its full length.
Carrying the line back
Keep the Excel gaps even on every piece, including at the wheel wells.
Conditions
A mild, dry, shaded day. Leave it a day before washing.
Ordering
Send your year and confirm it's the sedan. Keep the box and liners until every piece is on.
Why the greater length
A between-the-wheel-wells kit leaves the panels ahead of the front wheel well and behind the rear one uncovered. This kit is listed as reaching the bumpers at both ends, so the trim line runs the whole length of the side. Measure that full length at 4.75" before deciding.
Peel no liner until the Excel dry fit looks right.
The twelve-piece Excel kit TH90347 carries UPC 691821623242; ring 877-752-3811 with questions.
TH90347 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | TH90347 |
| UPC | 691821623242 |
| Part type | Rocker Panel Trim, Upper Kit |
| Pieces in kit | 12 |
| Material | Polished 26-gauge 304 stainless steel |
| Finish | Polished to a mirror shine |
| Width | 4.75" |
| Coverage / notes | Full Length, Includes coverage from the Wheel Wells to the bumper, both front and rear; Spans from the bottom of the molding DOWN to the specified width |
| Mounting | 3M automotive-grade acrylic foam tape; installs directly over the existing surface |
| Origin | Made in the USA |
| Fits | 1990-1992 Hyundai Excel |
Fitment: TH90347
| Vehicle | Years | Body style |
|---|---|---|
| Hyundai Excel | 1990-1992 | 4-door, Sedan |
Match the year, model, and body style in this table to your vehicle before ordering. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Other QAA trim cataloged for the 1990-1992 Hyundai Excel
- TH90345: 8-piece Rocker Panel Trim, Upper Kit
Check the body style on each listing; some kits are specific to one body style.
Installation tips: Rocker Panel Trim, Upper Kit
- Unpack all 12 pieces and match each one to its position on the vehicle, using the product photos, before fitting any of them.
- Each piece mounts with 3M automotive-grade acrylic foam tape, so clean and dry the mounting surface first; the tape needs paint or trim free of dirt and wax.
- Align the piece and press it firmly into place directly over the existing surface, working along its full length so the tape bonds evenly.
- Fit one piece at a time and compare each with the product photos and the pieces already in place.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: TH90347 Rocker Panel Trim, Upper Kit
Which Excel does TH90347 fit?
The 1990-1992 Hyundai Excel 4-door sedan.
How far does it reach?
The note says "Full Length, Includes coverage from the Wheel Wells to the bumper, both front and rear."
How wide is it?
4.75", from the bottom of the molding down.
How many pieces?
Twelve.
