Product Description
TH90340 Hyundai Excel 1990-1994 Hatchback Upper Rocker Kit, 4.75", 6 Pieces
TH90340 is a six-piece polished stainless steel Upper Kit for the 1990-1994 Hyundai Excel, listed for the 2-door hatchback. It "Spans from the bottom of the molding DOWN to the specified width," and that width is 4.75".
Hatchback only
This record's single fitment row names the 2-door hatchback, and no sibling listings are linked to it. If you have an Excel sedan, the record gives you no reason to choose this kit; call 877-752-3811 and we'll check what QAA lists for your car.
How an Upper Kit sits
The top edge of each piece meets the lower edge of the molding, and the trim runs 4.75" down from there. The bottom edge is set by that measurement, not by the door bottom, so the molding position decides where the lower line lands.
Check the 4.75" line
- Locate the bottom edge of the molding on both doors.
- Measure 4.75" down and mark it with masking tape.
- Stand back and look down the length of the Excel.
- If the mark goes below the door bottom or onto anything fitted there, send us a photo.
Length coverage
The record gives no length note for this kit, such as "between the wheel wells" or "Full Length," so it doesn't say how far along the side the six pieces reach. Look at the photos, and call us if you need to know before ordering.
What it's made of
Hyundai's 1990-1994 Excel hatchback takes six strips cut by QAA in the USA from polished 26 gauge 304 stainless; 3M automotive-grade acrylic foam tape holds them under the molding. Per QAA, that tape will hold for a lifetime and leaves the paint intact.
Molding condition
Because the trim works from the molding down, the molding has to be in place and secure. If it's cracked, lifting or missing, repair it first or talk to us before ordering.
Cleaning
Wash the band below the molding and rinse. Strip old wax and polish with a wax-and-grease remover, right up to the molding edge. Fix any chips or rust, then wipe with isopropyl alcohol just before fitting.
Six pieces
The record doesn't list positions. Lay the pieces out with the photos and label each liner.
Dry fit
Hold each piece up with painter's tape so its top edge sits snugly under the molding. Open and close the doors to check nothing catches.
Bonding
Peel the liner a few inches at a time, press as you go, and finish with firm pressure along the full length.
Matching the sides
Measure the gaps between the Excel pieces already fitted and keep the rest the same.
Conditions
Work on a mild, dry day in the shade. The Excel stays unwashed for a day.
Ordering
Give us the year and confirm it's the hatchback. Keep the box and liners until the job is done.
Fit one door first and check that the lower edge runs level before moving on.
No liner comes off the hatchback until the full dry fit looks correct.
TH90340 is the Excel hatchback kit, UPC 691821703357. Phone 877-752-3811 about fit.
TH90340 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | TH90340 |
| UPC | 691821703357 |
| Part type | Rocker Panel Trim, Upper Kit |
| Pieces in kit | 6 |
| Material | Polished 26-gauge 304 stainless steel |
| Finish | Polished to a mirror shine |
| Width | 4.75" |
| Coverage / notes | Spans from the bottom of the molding DOWN to the specified width |
| Mounting | 3M automotive-grade acrylic foam tape; installs directly over the existing surface |
| Origin | Made in the USA |
| Fits | 1990-1994 Hyundai Excel |
Fitment: TH90340
| Vehicle | Years | Body style |
|---|---|---|
| Hyundai Excel | 1990-1994 | 2-door, Hatchback |
Match the year, model, and body style in this table to your vehicle before ordering. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Installation tips: Rocker Panel Trim, Upper Kit
- Unpack all 6 pieces and match each one to its position on the vehicle, using the product photos, before fitting any of them.
- Each piece mounts with 3M automotive-grade acrylic foam tape, so clean and dry the mounting surface first; the tape needs paint or trim free of dirt and wax.
- Align the piece and press it firmly into place directly over the existing surface, working along its full length so the tape bonds evenly.
- Fit one piece at a time and compare each with the product photos and the pieces already in place.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: TH90340 Rocker Panel Trim, Upper Kit
Which Excel does TH90340 fit?
The 1990-1994 Hyundai Excel 2-door hatchback.
Where does it install?
From the bottom of the molding down 4.75".
Does it fit the sedan?
The record lists the hatchback only. Call 877-752-3811.
How many pieces?
Six.
