Product Description
Hyundai Scoupe 1991-1994 Coupe Full Rocker Kit TH91365, 7.625", 6 Pieces
TH91365 is a six-piece polished stainless steel Full Kit for the 1991-1994 Hyundai Scoupe 2-door coupe. It "Spans from the bottom of the molding to the bottom of the door," with a listed width of 7.625".
At a glance
One body style, four model years, six pieces, and no linked parts. The record gives no length note, so for questions about how far the pieces reach along the side, look at the photos or call 877-752-3811.
Measuring 7.625"
The width is given to the eighth of an inch, so measure with care. Hold a rigid ruler square to the door and read from the lower edge of the molding to the bottom of the door, at the front and the rear of both doors. A reading close to 7.625" on each is what you want; if any differ, send us the figures before ordering.
Six pieces, two doors
The record doesn't say how the six are split between the doors and any panels nearby. Use the photos to sort them, and number each liner before you begin.
Material
Hyundai's Scoupe coupe takes six strips QAA forms in the USA out of polished 26 gauge 304 stainless, running from molding to door bottom on 3M automotive-grade acrylic foam tape. That tape, QAA says, will hold for a lifetime and leaves the 1991-1994 car unmarked.
Before you start
- The molding is straight and firmly attached on both doors
- The paint is sound, with no flaking or rust in the band
- Painter's tape, cloths, wax-and-grease remover and isopropyl alcohol are to hand
- The car is in shade on a mild, dry day
Cleaning
Wash and rinse, then strip wax and polish from the whole band. Wipe with alcohol just before fitting, and let it flash off.
Dry fit
Tape each piece up so its top meets the molding and its bottom meets the door edge. Open both doors all the way and check for contact.
Bonding
Peel the liner in short sections, pressing across the full height as you go, then press the whole piece again.
Matching
Keep the Scoupe spacing the same throughout.
After fitting
Wait a day before washing. Keep the box and liners until you're satisfied with the result.
Ordering
Send the year and your readings.
If the molding has been changed
If the molding on your car has been replaced or refitted, measure both doors again and send us all four readings. A Full Kit lines up with it along the top edge, so its position decides the fit.
One door first
Fit one door completely, then step back and look along the side from the front and the rear. Adjusting a piece is simple while the liner is still on and much harder after the tape has gripped.
Photograph the Scoupe before you start so you can compare afterward.
Sort and label all six pieces before you begin.
Six Scoupe pieces, 7.625 inches wide: TH91365, UPC 691821489626. Call 877-752-3811.
TH91365 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | TH91365 |
| UPC | 691821489626 |
| Part type | Rocker Panel Trim, Full Kit |
| Pieces in kit | 6 |
| Material | Polished 26-gauge 304 stainless steel |
| Finish | Polished to a mirror shine |
| Width | 7.625" |
| Coverage / notes | Spans from the bottom of the molding to the bottom of the door |
| Mounting | 3M automotive-grade acrylic foam tape; installs directly over the existing surface |
| Origin | Made in the USA |
| Fits | 1991-1994 Hyundai Scoupe |
Fitment: TH91365
| Vehicle | Years | Body style |
|---|---|---|
| Hyundai Scoupe | 1991-1994 | 2-door, Coupe |
Fitment is listed exactly as QAA catalogs it. Confirm the body style as well as the year and model. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Installation tips: Rocker Panel Trim, Full Kit
- Unpack all 6 pieces and match each one to its position on the vehicle, using the product photos, before fitting any of them.
- Each piece mounts with 3M automotive-grade acrylic foam tape, so clean and dry the mounting surface first; the tape needs paint or trim free of dirt and wax.
- Align the piece and press it firmly into place directly over the existing surface, working along its full length so the tape bonds evenly.
- Fit one piece at a time and compare each with the product photos and the pieces already in place.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: TH91365 Rocker Panel Trim, Full Kit
Which Scoupe does TH91365 fit?
The 1991-1994 Hyundai Scoupe 2-door coupe.
Where does it install?
From the bottom of the molding to the bottom of the door.
How wide is it?
7.625".
How many pieces?
Six.
