Product Description
1996-1997 Chrysler Concorde Sedan Lower Rocker Kit, Eight Pieces, 6.25"-7.25" Tapered (TH36741)
TH36741 is an eight-piece polished stainless steel Lower Kit for the 1996-1997 Chrysler Concorde 4-door sedan. It tapers from 6.25" to 7.25" and "Spans from the bottom of the door UP to the specified width."
The taller of the Concorde kits
Two rocker kits are linked to this sedan. This one is the tall option, anchored at the door bottom and rising six and a quarter to seven and a quarter inches. TH36740 is a 3.625" Upper Kit that hangs from the molding instead. They cover different bands, and the record doesn't say whether they're designed to be combined. We'd want your measurements before advising on that, so call 877-752-3811 if you're thinking of both.
An inch of taper
The width changes by a full inch along the pieces, and the record doesn't say which end is taller. Hold each piece against its door with the liner on to see the direction before you peel.
Where the top edge lands
Because the reference is the door bottom, the top edge ends wherever the width runs out. Measure up from the bottom at both ends of each door, 6.25" and 7.25", and tape a line between the marks. If that line crosses a molding or another trim edge on your car, call before ordering.
Also linked
PP36740 is a six-piece pillar post kit for the same sedan. Check its listing for its finish.
Material
Chrysler's 1996-1997 Concorde takes eight tapered door strips of polished 26 gauge 304 stainless from a USA shop, secured over the existing surface with 3M automotive-grade acrylic foam tape. According to QAA, that tape will hold for a lifetime with no damage to the sedan.
Eight pieces
Match the Concorde pieces to the photos and label each liner by position.
Paint underneath
Seven inches of mirror finish shows dents and ripples, and the bottom edge of every door takes chips. Inspect both, repair, and let the paint cure.
Cleaning
Wash, dry, and wipe the lower band with isopropyl alcohol until clean.
Install
Set each piece's lower edge flush with the door bottom, liner on, and check. Then peel a few inches, press, and continue, pulling the liner as you go. Finish with firm pressure.
Continuous top line
Check that the Concorde top edges line up across every door gap.
Afterward
Give the Concorde a day before its first wash.
Door clearance
Open each door after its piece goes on and check the hinge side and the trailing edge for contact.
Finishing up
Measure each Concorde position from the door edges and keep it consistent.
Gather
For the Concorde, gather car soap, isopropyl alcohol, lint-free cloths, painter's tape, a marker for labels, a tape measure and a plastic trim tool. Pick a dry, mild day and work in the shade.
After the first day, mild soap and a soft towel.
If a piece is wrong for every door during the dry run, leave its liner on and call us with the SKU below.
For the Concorde set TH36741 (UPC 691821257188), phone 877-752-3811.
TH36741 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | TH36741 |
| UPC | 691821257188 |
| Part type | Rocker Panel Trim, Lower Kit |
| Pieces in kit | 8 |
| Material | Polished 26-gauge 304 stainless steel |
| Finish | Polished to a mirror shine |
| Width | 6.25" to 7.25" tapered |
| Coverage / notes | Spans from the bottom of the door UP to the specified width |
| Mounting | 3M automotive-grade acrylic foam tape; installs directly over the existing surface |
| Origin | Made in the USA |
| Fits | 1996-1997 Chrysler Concorde |
Fitment: TH36741
| Vehicle | Years | Body style |
|---|---|---|
| Chrysler Concorde | 1996-1997 | 4-door, Sedan |
Fitment is listed exactly as QAA catalogs it. Confirm the body style as well as the year and model. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Other QAA trim cataloged for the 1996-1997 Chrysler Concorde
Check the body style on each listing; some kits are specific to one body style.
Installation tips: Rocker Panel Trim, Lower Kit
- Unpack all 8 pieces and match each one to its position on the vehicle, using the product photos, before fitting any of them.
- Each piece mounts with 3M automotive-grade acrylic foam tape, so clean and dry the mounting surface first; the tape needs paint or trim free of dirt and wax.
- Align the piece and press it firmly into place directly over the existing surface, working along its full length so the tape bonds evenly.
- Fit one piece at a time and compare each with the product photos and the pieces already in place.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: TH36741 Rocker Panel Trim, Lower Kit
Where does TH36741 sit?
It's a Lower Kit, from the bottom of the door up 6.25"-7.25".
What's TH36740?
The linked 3.625" Upper Kit that spans down from the bottom of the molding.
Which car?
1996-1997 Chrysler Concorde sedan.
How many pieces?
Eight.
