Product Description
Stainless Door Handle Accents for the 1989-1994 Nissan Maxima Sedan, 4 Pieces (DH89540)
For keeping an older Maxima sharp, DH89540 is a small, bolt-free piece of brightwork. QAA lists this set of four door handle accents for the Nissan Maxima 4-door sedan, model years 1989 through 1994. They're cut from 304 stainless steel, 26 gauge, polished, and made in the USA.
The listing
One row: Nissan Maxima, 1989-1994, 4-door Sedan. The Fitment tab has it as entered.
For an older car, check the surface
Tape bonds to paint, so the condition of the paint around your handles matters more on an older car. Look for chipped, peeling or chalky paint where the accents will sit. Sound paint, cleaned well, gives the tape the best grip. If an area is flaking, it's worth addressing before you install anything there.
What accents do
They form a bright line at each Maxima handle without enclosing it. The catalog doesn't detail where each piece sits, so the product photos are the guide. Compare them with your Maxima's handles before ordering.
The metal
Grade 304 stainless, 26 gauge, polished. The shine is the steel itself rather than a plated layer, and the thin sheet follows the body's shape around the handle.
Mounting
On the 1989-1994 Maxima, the four accents sit directly over the door handle area with 3M automotive-grade acrylic foam tape. Per QAA, the tape holds for a lifetime without causing any damage to the Nissan's surface.
Installation
Wash each handle area, degrease it, and let it dry; older paint can hold wax and polish residue, so a second degreaser pass is a good idea. Dry-fit each accent with its liner on and mark its ends with painter's tape. Peel, set it on the marks and press firmly along its full length, then press again a minute later. The Installation tab has the full routine.
Lining up
Fit both fronts first and compare them from in front of the car. Match the rears to them.
Other Maxima pieces
QAA cross-lists more trim for this sedan:
- PP89540, 4pc pillar post trim
- PP89541, 6pc pillar post trim
- TH89540, a 6pc full rocker panel kit spanning from the bottom of the molding to the bottom of the door, listed at 8.75"
Combining handle accents with pillar trim or the rocker kit brightens the whole side of the car.
Before you buy
Confirm your Maxima is a 4-door sedan from the listed years, compare the photos with your handles, and check the paint around them.
Conditions
Install on a mild, dry day out of direct sun, and keep the car dry overnight. Paint that is cold or sun-hot makes foam tape harder to seat, so a shaded garage or carport on a mild afternoon is ideal.
Care
For the Nissan's accents, mild soap and a soft towel are all you need; steel wool or scouring pads would scratch the polish.
Questions
Call Quality Automotive Trims at 877-752-3811 and mention DH89540. The UPC is in the Specs tab, and the Installation tab covers surface prep for the tape.
DH89540 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | DH89540 |
| UPC | 691821607983 |
| Part type | Door Handle Accent Trim |
| Pieces in kit | 4 |
| Material | Polished 26-gauge 304 stainless steel |
| Finish | Polished to a mirror shine |
| Mounting | 3M automotive-grade acrylic foam tape; installs directly over the existing surface |
| Origin | Made in the USA |
| Fits | 1989-1994 Nissan Maxima |
Fitment: DH89540
| Vehicle | Years | Body style |
|---|---|---|
| Nissan Maxima | 1989-1994 | 4-door, Sedan |
Match the year, model, and body style in this table to your vehicle before ordering. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Other QAA trim cataloged for the 1989-1994 Nissan Maxima
- PP89540: 4-piece Pillar Post Trim
- PP89541: 6-piece Pillar Post Trim
- TH89540: 6-piece Rocker Panel Trim, Full Kit
Check the body style on each listing; some kits are specific to one body style.
Installation tips: Door Handle Accent Trim
- Unpack all 4 pieces and match each one to its position on the vehicle, using the product photos, before fitting any of them.
- Each piece mounts with 3M automotive-grade acrylic foam tape, so clean and dry the mounting surface first; the tape needs paint or trim free of dirt and wax.
- Align the piece and press it firmly into place directly over the existing surface, working along its full length so the tape bonds evenly.
- Fit one piece at a time and compare each with the product photos and the pieces already in place.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: DH89540 Door Handle Accent Trim
Which car does DH89540 fit?
The 1989-1994 Nissan Maxima, 4-door sedan.
How many pieces?
Four door handle accents.
What is it made of?
Polished 304 stainless steel, 26 gauge, made in the USA.
Does it need drilling?
No. It installs directly over the existing surface with 3M automotive-grade acrylic foam tape.
How long does the tape hold?
QAA states the tape will hold for a lifetime without causing any damage to the surface of the vehicle.
