Product Description
Toyota Corolla Sedan 1983-1984 Stainless Door Handle Trim, 8 Pieces (DH93110)
Finding bright trim for a Corolla from 1983 or 1984 is the whole point of DH93110. It's an eight-piece door handle accent set in polished 304 stainless steel, 26 gauge, made in the USA, and it's listed for the four-door sedan only.
A short fitment window
The catalog shows two model years and one body style: Toyota Corolla, 1983-1984, 4-door Sedan. That's a narrow window, so double-check the year in your records before ordering. Other Corolla body styles from those years aren't part of this listing. The Fitment tab shows the row exactly as QAA entered it.
What's in the box
Eight accent pieces, each mounting with 3M automotive-grade acrylic foam tape. The sheet doesn't say where each one goes, and there's no note about key access either way, so we can't tell you whether any piece is cut for a lock cylinder. The photos show the set; if your doors look different from what you see there, call us and we'll talk it through.
Paint on a car this age
This is the most important part of the job on an older Corolla. Tape bonds to the paint, and the paint has to be firmly bonded to the door. Run a fingertip around each handle area. If you feel flaking edges, see bare metal, or wipe off a chalky residue, deal with that first. Firm, clean paint is the foundation for everything else.
The stainless itself
Polished 304 stainless at 26 gauge: it follows the Corolla's panel, and its brightness is polish, not coating. It's a straightforward material choice for a small accent part.
Mounting, in brief
On the 1983-1984 Corolla, each of the eight accents fits over the existing surface without drilling. Per QAA, the tape will hold for a lifetime with no harm to the sedan's surface.
Step by step
Sort the eight pieces by door using the photos. Wash each handle area and rinse. Degrease, and then degrease again, because decades of wax can sit in the paint near a handle. Dry completely. Hold each piece in place with its liner still on, look at the line from a few feet back, and mark the ends with painter's tape. Peel the liner, line the piece up with your marks, and press firmly along its full length. Press once more a minute later. The Installation tab has the full prep list.
Sorting the eight
Do one front door, then the other, and compare from the front of the car. Match the rear doors to those once you're happy.
Why bother on an older car
Small details carry a lot of weight on a car that's been kept around this long. A polished accent at each handle reads as care and attention, and it doesn't change how anything works.
Install conditions
Mild temperature, dry air, and shade. Keep the car dry overnight afterward.
Cleaning later
Soft cloth, mild soap. No steel wool, no scouring pads.
Need help?
Call Quality Automotive Trims at 877-752-3811 and mention DH93110. You'll find the UPC on the Specs tab.
DH93110 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | DH93110 |
| UPC | 691821485055 |
| Part type | Door Handle Accent Trim |
| Pieces in kit | 8 |
| Material | Polished 26-gauge 304 stainless steel |
| Finish | Polished to a mirror shine |
| Mounting | 3M automotive-grade acrylic foam tape; installs directly over the existing surface |
| Origin | Made in the USA |
| Fits | 1983-1984 Toyota Corolla |
Fitment: DH93110
| Vehicle | Years | Body style |
|---|---|---|
| Toyota Corolla | 1983-1984 | 4-door, Sedan |
Match the year, model, and body style in this table to your vehicle before ordering. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Installation tips: Door Handle Accent Trim
- Unpack all 8 pieces and match each one to its position on the vehicle, using the product photos, before fitting any of them.
- Each piece mounts with 3M automotive-grade acrylic foam tape, so clean and dry the mounting surface first; the tape needs paint or trim free of dirt and wax.
- Align the piece and press it firmly into place directly over the existing surface, working along its full length so the tape bonds evenly.
- Fit one piece at a time and compare each with the product photos and the pieces already in place.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: DH93110 Door Handle Accent Trim
Which Corolla does DH93110 fit?
The 1983-1984 Toyota Corolla 4-door sedan.
How many pieces come in the set?
Eight door handle accent pieces.
Is there a cutout for the key lock?
The catalog does not include a key-access note for this set. Check the photos or call 877-752-3811.
What is it made of?
Polished 304 stainless steel, 26 gauge, made in the USA.
Does it require drilling?
No. It installs directly over the existing surface with 3M automotive-grade acrylic foam tape.
How long does the tape hold?
QAA states the tape will hold for a lifetime without causing any damage to the surface of the vehicle.
