Product Description
Ford F-150 1992 2-Door Pickup Stainless Door Sill Trim, 2 Pieces, 2.875" Wide (DS17308-1)
DS17308-1 is a two-piece set of polished stainless door sill trims for the 1992 Ford F-150 2-door pickup. Each plate is 2.875" wide, made in the USA from 304 stainless steel at 26 gauge, and mounts with 3M automotive-grade acrylic foam tape.
A single model year
The fitment row reads Ford F-150, 1992-1992, 2-door Pickup Truck. One year, one body style. That's narrow, so confirm your truck's model year in your records before ordering. Other years and cab configurations aren't on this listing. The Fitment tab shows the row.
Measure against 2.875"
The catalog lists a width of 2.875" and no length. Before buying, measure the flat part of your sill where you'd like the plate to sit. If 2.875" fits comfortably, you're in good shape. If you're not sure, call us with your measurement.
Two plates, two doors
A 2-door pickup has a sill at each door, and this set has two pieces. The catalog doesn't describe the plates beyond width, so the photos are your reference for shape.
What a sill plate is
The sill is the threshold at the bottom of the door opening, the part you step over climbing into the cab. A sill trim is a plate that covers that surface with a polished finish.
The steel
Type 304 stainless, polished, at 26 gauge. That's thin sheet, and its shine comes from the polished metal rather than plating.
How it mounts
Both sill plates fit over the 1992 F-150's existing surface without drilling. According to QAA, the tape will hold for a lifetime with no damage to the truck's surface.
Prep on an older truck
A pickup from this era has seen a lot of boots on its sills. Inspect the paint there first: the tape needs sound paint, not flaking or bare spots. Vacuum the grit, then wash, rinse, and degrease well. Older paint benefits from a second pass to lift wax and dressing. Dry fully.
Setting the plates
Open the door and hold a plate in place with the liner on. Center it along the sill and mark each end with painter's tape. Peel the liner, line up with the marks, and press firmly along the whole length, then again after a minute. Do the second plate the same way and compare. The Installation tab has full prep details.
Why add sill plates
With the door open, the sill is right there at your feet as you climb in. A polished plate gives the opening a cleaner look and sits flat, so the door closes just as it did before.
Let it cure
Stay off the sills for the rest of the day. Install on a mild, dry day out of direct sun.
Ordering checklist
Confirm the truck is a 1992 F-150 2-door pickup, measure the sill against 2.875", and check the paint condition.
Care
Mild soap and a soft cloth. Avoid steel wool.
Questions
Questions on the F-150 sill pair DS17308-1 can go to 877-752-3811. For the F-150 sill plates, the barcode is in Specs.
DS17308-1 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | DS17308-1 |
| UPC | 691821689484 |
| Part type | Door Sill trim |
| Pieces in kit | 2 |
| Material | Polished 26-gauge 304 stainless steel |
| Finish | Polished to a mirror shine |
| Width | 2.875" |
| Mounting | 3M automotive-grade acrylic foam tape; installs directly over the existing surface |
| Origin | Made in the USA |
| Fits | 1992 Ford F-150 |
Fitment: DS17308-1
| Vehicle | Years | Body style |
|---|---|---|
| Ford F-150 | 1992 | 2-door, Pickup Truck |
Match the year, model, and body style in this table to your vehicle before ordering. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Installation tips: Door Sill trim
- Unpack all 2 pieces and match each one to its position on the vehicle, using the product photos, before fitting any of them.
- Each piece mounts with 3M automotive-grade acrylic foam tape, so clean and dry the mounting surface first; the tape needs paint or trim free of dirt and wax.
- Align the piece and press it firmly into place directly over the existing surface, working along its full length so the tape bonds evenly.
- Fit one piece at a time and compare each with the product photos and the pieces already in place.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: DS17308-1 Door Sill trim
What does DS17308-1 fit?
The 1992 Ford F-150 2-door pickup.
How wide are the plates?
The catalog lists 2.875" width.
How many pieces?
Two door sill trims.
What is it made of?
Polished 304 stainless steel, 26 gauge, made in the USA.
Does it need drilling?
No. It installs directly over the existing surface with 3M automotive-grade acrylic foam tape.
How long does the tape hold?
QAA states the tape will hold for a lifetime without causing any damage to the surface of the vehicle.
