Product Description
Toyota Sienna 2011-2020 Stainless Door Sill Trim, 2 Pieces, 2" x 20" (DS11150)
DS11150 is a pair of polished stainless door sill trims for the Toyota Sienna minivan, model years 2011 through 2020. The catalog gives the size: 2" wide and 20" long. The steel is 304 grade at 26 gauge, made in the USA.
Size first
This listing gives both width and length: 2" by 20". That makes it easy to check against your own sills with a tape measure before ordering. Measure the flat area you want covered and compare. The catalog doesn't say which door openings the two plates are for, so the photos and a quick call are the way to confirm placement.
Fitment
Toyota Sienna, 2011-2020, 4-door Minivan. A ten-year span on one row. The Fitment tab shows the entry.
A long list of Sienna trim
Many related listings for the same Sienna are cross-referenced on this sheet:
- DH11150, a four-piece door handle accent set.
- GC11150, a one-piece gas door cover trim.
- LB11150, a one-piece license bar, the accent above the plate.
- PP11150, PP11151 and PP11152, pillar post trims in four, six and eight pieces; the eight-piece set includes a front mirror piece.
- RD11150, a one-piece rear deck accent, the rear lid accent, at a listed width of 2.
There are more as well: TH11150, TH11151, WP11150, WP11151, WP11152, WQ11150 and WS11150. Their details aren't on this sheet, so check their own listings.
What sill trim is
The sill is the threshold at the bottom of the door opening, the surface you step over getting in. A sill trim plate sits on top of it.
Steel and tape
The Sienna's plates are polished 304 stainless, 26 gauge, and mount with 3M automotive-grade acrylic foam tape over the existing sill surface without drilling. According to QAA, the tape will hold for a lifetime with no damage to the minivan's surface.
Clean the sills well
Minivan sills see a lot of feet. Vacuum out the grit, wash, rinse and degrease the area thoroughly. Any dressing or protectant must be removed. Dry completely.
Install
With the door open, hold each plate in place with the liner still on. Center it on the sill and mark the ends with painter's tape. Peel, align, and press firmly from end to end. Press again after a minute. The Installation tab covers the prep in detail.
Why sills
Every time a door opens, the sill is on display, and it's the first surface anyone steps across. A polished plate there makes the opening look finished. It sits flat on the threshold and doesn't change how the doors close.
Before you order
Confirm your Sienna is a 2011-2020 model, measure the sill against 2" by 20", and look at the photos to see the plate shape. If handle, pillar or other trim is planned for the Sienna, compare those listings at the same time.
Afterward
Fit the Sienna's plates on a mild, dry day, and keep feet off them for the rest of that day.
Care
Soap, water and a soft towel. No scouring pads.
Call
For the Sienna sill plates, phone 877-752-3811 and mention DS11150; Specs carries the UPC.
DS11150 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | DS11150 |
| UPC | 691821668212 |
| Part type | Door Sill trim |
| Pieces in kit | 2 |
| Material | Polished 26-gauge 304 stainless steel |
| Finish | Polished to a mirror shine |
| Width | 2" |
| Coverage / notes | 20" length |
| Mounting | 3M automotive-grade acrylic foam tape; installs directly over the existing surface |
| Origin | Made in the USA |
| Fits | 2011-2020 Toyota Sienna |
Fitment: DS11150
| Vehicle | Years | Body style |
|---|---|---|
| Toyota Sienna | 2011-2020 | 4-door, Minivan |
Fitment is listed exactly as QAA catalogs it. Confirm the body style as well as the year and model. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Other QAA trim cataloged for the 2011-2020 Toyota Sienna
- DH11150: 4-piece Door Handle Accent Trim
- GC11150: 1-piece Gas Door Cover Trim
- LB11150: 1-piece License Plate Bar Accent
- PP11150: 4-piece Pillar Post Trim
- PP11151: 6-piece Pillar Post Trim
- PP11152: 8-piece Pillar Post Trim
- RD11150: 1-piece Rear Deck Accent
- TH11150: 4-piece Rocker Panel Trim, Lower Kit
Check the body style on each listing; some kits are specific to one body style.
Installation tips: Door Sill trim
- Unpack all 2 pieces and match each one to its position on the vehicle, using the product photos, before fitting any of them.
- Each piece mounts with 3M automotive-grade acrylic foam tape, so clean and dry the mounting surface first; the tape needs paint or trim free of dirt and wax.
- Align the piece and press it firmly into place directly over the existing surface, working along its full length so the tape bonds evenly.
- Fit one piece at a time and compare each with the product photos and the pieces already in place.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: DS11150 Door Sill trim
Which vehicle does DS11150 fit?
The 2011-2020 Toyota Sienna 4-door minivan.
What size are the plates?
The catalog lists 2" width and 20" length.
How many pieces?
Two door sill trims.
What material?
Polished 304 stainless steel, 26 gauge, made in the USA.
Does it need drilling?
No. It installs directly over the existing surface with 3M automotive-grade acrylic foam tape.
How long does the tape hold?
QAA states the tape will hold for a lifetime without causing any damage to the surface of the vehicle.
