Product Description
Toyota Sienna 2011-2020 Stainless Gas Door Cover Trim (GC11150)
GC11150 is a single polished stainless cover for the fuel door of the Toyota Sienna minivan, 2011 through 2020. It's 304 stainless steel at 26 gauge, made in the USA.
It covers your door; it doesn't replace it
The catalog is direct about this: it is not a replacement cap and not a replacement part. You must have the existing gas door to install this piece. The trim sticks onto the outer face of the door your Sienna already has.
Fitment
Toyota Sienna, 2011-2020, 4-door Minivan. Ten model years on one row. The Fitment tab shows it.
Sienna trim on this sheet
- DS11150, a two-piece door sill trim at 2" wide and 20" long.
- DH11150, a four-piece door handle accent set.
- LB11150, a license bar above the plate.
- PP11150, PP11151 and PP11152, pillar post trims in four, six and eight pieces; the eight includes a front mirror piece.
- RD11150, a rear lid accent at 2.
TH11150, TH11151, WP11150, WP11151, WP11152, WQ11150 and WS11150 are listed as well, with their own pages. If you're doing several, the gas door trim is the quickest to install, so it's a good one to start with.
Polished 304 stainless
The steel is 26 gauge and polished; its bright face is the metal itself.
Mounting
3M automotive-grade acrylic foam tape holds it, and it installs directly over the existing surface. Nothing to drill. QAA states the tape will hold for a lifetime without causing any damage to the surface of the vehicle.
Before you stick it on
Check that the fuel door closes fully and sits flush. The paint on its face should be sound, without chips or peeling, since the tape bonds to it. Wash the door, rinse, and wipe with degreaser, especially along the edges where wax collects. Let it dry.
Install
Close the door and set the trim on it, liner still attached. Look at the gap between trim edge and door edge on all sides and adjust until it's even. Mark one or two points on the body with painter's tape. Peel, align, and press firmly across the whole face, then once more after a minute. Swing the door open and closed to make sure it clears. The Installation tab has full prep.
Why a gas door trim
It's a small polished detail on the side of the minivan, done in minutes, with no change to refueling.
Checklist
2011-2020 Sienna; gas door present, closing properly; photos match.
Conditions
Mild, dry weather; keep it dry overnight.
Care
Wash the trim along with the rest of the minivan, using mild soap and a soft towel. Fuel drips can be wiped off with a damp cloth. Keep steel wool and scouring pads away from polished stainless, since they leave scratches that show in the light.
Starting small
If this is your first polished trim piece, it's a good way to get a feel for the tape before larger parts.
Questions
Sienna owners can call 877-752-3811 about GC11150; look under Specs for the UPC.
GC11150 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | GC11150 |
| UPC | 691821558025 |
| Part type | Gas Door Cover Trim |
| Pieces in kit | 1 |
| Material | Polished 26-gauge 304 stainless steel |
| Finish | Polished to a mirror shine |
| Mounting | 3M automotive-grade acrylic foam tape; installs directly over the existing surface |
| Origin | Made in the USA |
| Fits | 2011-2020 Toyota Sienna |
| Not included | This is NOT a replacement gas cap or door; your existing gas door is required |
Fitment: GC11150
| Vehicle | Years | Body style |
|---|---|---|
| Toyota Sienna | 2011-2020 | 4-door, Minivan |
Check your vehicle against every column here: year range, model, and body style all have to match. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Other QAA trim cataloged for the 2011-2020 Toyota Sienna
- DH11150: 4-piece Door Handle Accent Trim
- DS11150: 2-piece Door Sill trim
- LB11150: 1-piece License Plate Bar Accent
- PP11150: 4-piece Pillar Post Trim
- PP11151: 6-piece Pillar Post Trim
- PP11152: 8-piece Pillar Post Trim
- RD11150: 1-piece Rear Deck Accent
- TH11150: 4-piece Rocker Panel Trim, Lower Kit
Check the body style on each listing; some kits are specific to one body style.
Installation tips: Gas Door Cover Trim
- Confirm your vehicle still has its original gas door. This trim mounts over it and does not replace it.
- Unpack the piece and hold it in position to confirm the fit before mounting it.
- Each piece mounts with 3M automotive-grade acrylic foam tape, so clean and dry the mounting surface first; the tape needs paint or trim free of dirt and wax.
- Align the piece and press it firmly into place directly over the existing surface, working along its full length so the tape bonds evenly.
- Step back and check alignment before pressing along the full length of the piece.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: GC11150 Gas Door Cover Trim
Is this a replacement gas door?
No. It is not a replacement cap or part. You must have the existing gas door to install this piece.
What does GC11150 fit?
The 2011-2020 Toyota Sienna 4-door minivan.
What is it made of?
Polished 304 stainless steel, 26 gauge, made in the USA.
Does it need drilling?
No. It installs directly over the existing surface with 3M automotive-grade acrylic foam tape.
How long does the tape hold?
QAA states the tape will hold for a lifetime without causing any damage to the surface of the vehicle.
