Product Description
Toyota Sienna 2011-2020 Eight-Piece Stainless Pillar Trim With Front Mirror Piece (PP11152)
PP11152 is the largest pillar post set on this sheet for the 2011-2020 Toyota Sienna 4-door minivan, and its note says why: "Includes front mirror piece." Eight pieces of polished 26 gauge 304 stainless steel, made in the USA, with that mirror piece among them. The four-piece PP11150 and six-piece PP11151 have no such note. The catalog doesn't describe the mirror piece's shape or exact spot, so look at the product photos to see it before you buy.
Fitment
Toyota Sienna, 2011 through 2020, 4-door, minivan. The title agrees. Check the Sienna is from 2011 to 2020. Questions go to Quality Automotive Trims at 877-752-3811; mention PP11152.
Mounting
3M automotive-grade acrylic foam tape, installed directly over the existing surface. There's no drilling, and nothing is removed. Prep for the eight-piece Sienna set is under Installation. No width is listed.
Start with the mirror piece
When the set arrives, find the mirror piece first using the photos. Offer it up to the spot the photos show with its backing still on, and confirm the fit. It's the piece the note singles out, so it's the one to be sure of. Then sort the remaining seven from front to back, offering each to its pillar and labeling its backing as you go. Mark each piece's ends on the van with short strips of painter's tape. The Sienna set's eight covers are stainless.
Prep
Soapy water, rinse, dry. Then rubbing alcohol on a lint-free cloth, letting it evaporate. Remove wax, sealant or coating from every contact area, including around the mirror piece's spot. Repair any chipped or flaking finish before going further.
Install
One cover at a time. Peel a backing, set the piece between its marks, press firmly along its full length, and finish with a fingertip along both edges. Small or angled pieces need pressure over every corner. Step back and look at the covers when they're done, then compare them. Choose a mild, dry day per the Installation tab and wait its cure time before washing.
The rest of the Sienna sheet
DH11150 is a 4-piece door handle accent set; DS11150 a 2-piece door sill trim listed at 2 with a "20" length" note; GC11150 a 1-piece gas door cover trim; LB11150 a 1-piece above-plate license bar accent; and RD11150 a 1-piece rear deck accent at 2 inches whose trunk-lid name doesn't fit a minivan, so check its photos. TH11150, TH11151, WP11150, WP11151, WQ11150, WS11150 and WP11152 are listed by number only. Ask before combining any of them with this set, in case they overlap.
Plan the time
Eight pieces, one of them a mirror piece, makes this the longest of the three Sienna pillar jobs. Set aside an unhurried session in shade or a bright garage, where glare off the glass won't hide a crooked edge, so every piece gets a careful dry fit before its backing comes off.
Upkeep
A soft cloth, mild soap and water. No scouring pads or steel wool.
PP11152 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | PP11152 |
| UPC | 691821578832 |
| Part type | Pillar Post Trim |
| Pieces in kit | 8 |
| Material | Polished 26-gauge 304 stainless steel |
| Finish | Polished to a mirror shine |
| Coverage / notes | Includes front mirror piece |
| Mounting | 3M automotive-grade acrylic foam tape; installs directly over the existing surface |
| Origin | Made in the USA |
| Fits | 2011-2020 Toyota Sienna |
Fitment: PP11152
| Vehicle | Years | Body style |
|---|---|---|
| Toyota Sienna | 2011-2020 | 4-door, Minivan |
Match the year, model, and body style in this table to your vehicle before ordering. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Other QAA trim cataloged for the 2011-2020 Toyota Sienna
- DH11150: 4-piece Door Handle Accent Trim
- DS11150: 2-piece Door Sill trim
- GC11150: 1-piece Gas Door Cover Trim
- LB11150: 1-piece License Plate Bar Accent
- PP11150: 4-piece Pillar Post Trim
- PP11151: 6-piece Pillar Post Trim
- RD11150: 1-piece Rear Deck Accent
- TH11150: 4-piece Rocker Panel Trim, Lower Kit
Check the body style on each listing; some kits are specific to one body style.
Installation tips: Pillar Post Trim
- Unpack all 8 pieces and match each one to its position on the vehicle, using the product photos, before fitting any of them.
- Each piece mounts with 3M automotive-grade acrylic foam tape, so clean and dry the mounting surface first; the tape needs paint or trim free of dirt and wax.
- Align the piece and press it firmly into place directly over the existing surface, working along its full length so the tape bonds evenly.
- Fit one piece at a time and compare each with the product photos and the pieces already in place.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: PP11152 Pillar Post Trim
What makes PP11152 different?
It has eight pieces and is noted as including a front mirror piece.
What does it fit?
The 2011-2020 Toyota Sienna 4-door minivan.
Where does the mirror piece go?
The listing doesn't say. The photos show it, or call 877-752-3811.
Do I need to drill?
No. It mounts with 3M automotive-grade acrylic foam tape directly over the existing surface.
What are the smaller sets?
PP11150 (four pieces) & PP11151 (six pieces).
