Product Description
Toyota Sienna 2011-2020 Polished Stainless License Bar, 1 Piece (LB11150)
Ten model years of the Toyota Sienna minivan share this part. LB11150 is a one-piece stainless license bar, cataloged as a License Plate Bar Accent, for the 4-door Sienna from 2011 through 2020. It puts one bright line above the Sienna's rear plate, cut from 26-gauge 304 stainless steel, mirror-polished and made in the USA.
The listing is short on dimensions: no width and no key access note. That means two things for you. First, the product photos are the guide to the bar's size and outline, so look at them closely next to the area above your plate. Second, since the catalog says nothing about a key opening, compare your Sienna's rear with the photos to be sure nothing there, such as a camera, a lock or a dealer badge, sits where the bar would go. If something does, call us before you order rather than guessing.
Mounting it straight
The bar mounts with 3M automotive-grade acrylic foam tape and installs directly over the existing surface. There's no drilling, and nothing has to come off the van. QAA states the tape will hold for a lifetime without causing any damage to the surface of the vehicle.
Seen from behind, any tilt in a horizontal bar is easy to spot, so take your time with placement. Wash the area, wipe it with rubbing alcohol, and let it dry. Set the bar in place with the liner on, then walk back several steps and check that it sits level and centered over the plate. Mark the ends with painter's tape, peel, place to the marks, and press firmly from the center out. Open and close the rear hatch gently for the first day, and wait before the first wash. The Installation tab has more on temperature.
Building out the Sienna
QAA cross-lists fourteen parts for the same minivan, so more can follow if you like the look. At the back, RD11150 is a one-piece accent at 2" (the catalog calls it a rear deck accent). Along the sides, DS11150 is a two-piece door sill trim noted "20" length," DH11150 a four-piece door handle accent, and GC11150 a one-piece gas door cover trim. Pillar post kits come in four, six and eight pieces; PP11152, the eight-piece kit, is noted "Includes front mirror piece." Window trim packages range from WP11150, the sixteen-piece full package with upper trim, pillar posts and sills, to WP11152, four pieces of upper trim only, and WS11150 is a four-piece window sill set at 0.625" noted "90 degree bend." Rocker kits TH11150 and TH11151 and a four-piece wheel well accent round out the list. Check each listing's photos and notes before ordering.
Fitment and care
One row: Toyota Sienna, 4-door minivan, 2011-2020. LB11150 fits Siennas built 2011 through 2020. Wash the bar with mild soap and water and dry with a soft towel; skip abrasive pads.
For the Sienna license trim, call 877-752-3811 and quote LB11150; you'll see the UPC under Specs.
LB11150 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | LB11150 |
| UPC | 691821339136 |
| Part type | License Plate Bar Accent |
| Pieces in kit | 1 |
| Material | Polished 26-gauge 304 stainless steel |
| Finish | Polished to a mirror shine |
| Mounting | 3M automotive-grade acrylic foam tape; installs directly over the existing surface |
| Origin | Made in the USA |
| Fits | 2011-2020 Toyota Sienna |
Fitment: LB11150
| Vehicle | Years | Body style |
|---|---|---|
| Toyota Sienna | 2011-2020 | 4-door, Minivan |
Fitment is listed exactly as QAA catalogs it. Confirm the body style as well as the year and model. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Other QAA trim cataloged for the 2011-2020 Toyota Sienna
- DH11150: 4-piece Door Handle Accent Trim
- DS11150: 2-piece Door Sill trim
- GC11150: 1-piece Gas Door Cover Trim
- PP11150: 4-piece Pillar Post Trim
- PP11151: 6-piece Pillar Post Trim
- PP11152: 8-piece Pillar Post Trim
- RD11150: 1-piece Rear Deck Accent
- TH11150: 4-piece Rocker Panel Trim, Lower Kit
Check the body style on each listing; some kits are specific to one body style.
Installation tips: License Plate Bar Accent
- Unpack the piece and hold it in position to confirm the fit before mounting it.
- Each piece mounts with 3M automotive-grade acrylic foam tape, so clean and dry the mounting surface first; the tape needs paint or trim free of dirt and wax.
- Align the piece and press it firmly into place directly over the existing surface, working along its full length so the tape bonds evenly.
- Step back and check alignment before pressing along the full length of the piece.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: LB11150 License Plate Bar Accent
Which Sienna years does LB11150 fit?
2011-2020, 4-door minivan.
How wide is the bar?
The catalog doesn't list a width. The product photos show the size.
Does it have a key opening?
The catalog doesn't mention key access. Compare your van with the photos or call 877-752-3811.
How does it attach?
With 3M automotive-grade acrylic foam tape. QAA states the tape will hold for a lifetime without causing any damage to the surface of the vehicle.
How many pieces?
One.
