Product Description
Toyota Sienna 2011-2020 Stainless Wheel Well Accent Trim WQ11150, 4 Pieces
WQ11150 is a four-piece set of polished stainless steel Wheel Well Accent Trim for the 2011-2020 Toyota Sienna 4-door minivan. The listing reads "With 3M adhesive installation and black rubber gasket edging".
Ten model years, one set
The fitment covers every Sienna from 2011 through 2020, with no split by trim or year. No width is listed for this set, so the photos are the way to judge how much stainless shows around each arch. If your Sienna's wheel openings look different from the photos, call 877-752-3811 before ordering.
Edging and material
Each piece carries black rubber gasket edging along the side that meets the opening. The stainless is high-quality polished 26 gauge 304, made in the USA, and it goes on over the existing surface with 3M automotive-grade acrylic foam tape. QAA states the tape will hold for a lifetime without causing any damage to the surface of the vehicle.
Preparing each arch
Wash around all four wheel openings and let them dry. Check where the trim will sit for old adhesive, wax or paint that's lifting, and deal with it. Each strip gets a wax-and-grease remover wipe and then isopropyl alcohol just before its piece goes on.
Fitting
Sort the four by corner using the photos and mark each liner. For each one: hold it in place with the liner on, put painter's tape at the ends, and check that the gasket runs evenly along the opening. Then peel back an inch of liner, press that end onto its mark and work around the arch, pressing piece and gasket into line together. Finish one wheel opening of the van and use it as the reference for the rest.
The rest of the Sienna group
The Sienna group lists:
- Window packages WP11150 (16 pieces, FULL), WP11151 (8, upper trim and sills) and WP11152 (4, upper trim only).
- Pillar sets PP11150 (4), PP11151 (6) and PP11152 (8, "Includes front mirror piece").
- A four-piece window sill set at 0.625" with a "90 degree bend".
- A four-piece lower rocker kit at 2.375-3.375" on the doors only, and a two-piece On the rocker strip at 1.25" x 53.75".
- A four-piece door handle accent, a two-piece door sill trim at 2" x 20", a gas door cover, a license bar above-plate accent and a rear deck accent at 2".
Care
No washing for a day. After that, mild soap and a soft cloth, and keep pressure washer spray off the gasket edging. If a piece won't follow its opening as the photos show, keep the liner on and call 877-752-3811.
On arrival
Count the four pieces and compare each with the photos before you clean the van. Leave the liners on until each piece is ready to go on. A dry, mild day suits the tape best, and the pieces should stay in the shade until they're fitted. If you're also fitting rocker or window trim from the Sienna group, do the wheel wells as a separate job.
WQ11150, the wheel well kit for the 2011-2020 Sienna, has UPC 691821467761, and 877-752-3811 connects you with someone who knows it.
WQ11150 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | WQ11150 |
| UPC | 691821467761 |
| Part type | Wheel Well Accent Trim |
| Pieces in kit | 4 |
| Material | Polished 26-gauge 304 stainless steel |
| Finish | Polished to a mirror shine |
| Edging | Black rubber gasket edging |
| Mounting | 3M automotive-grade acrylic foam tape; installs directly over the existing surface |
| Origin | Made in the USA |
| Fits | 2011-2020 Toyota Sienna |
Fitment: WQ11150
| Vehicle | Years | Body style |
|---|---|---|
| Toyota Sienna | 2011-2020 | 4-door, Minivan |
Check your vehicle against every column here: year range, model, and body style all have to match. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Other QAA trim cataloged for the 2011-2020 Toyota Sienna
- DH11150: 4-piece Door Handle Accent Trim
- DS11150: 2-piece Door Sill trim
- GC11150: 1-piece Gas Door Cover Trim
- LB11150: 1-piece License Plate Bar Accent
- PP11150: 4-piece Pillar Post Trim
- PP11151: 6-piece Pillar Post Trim
- PP11152: 8-piece Pillar Post Trim
- RD11150: 1-piece Rear Deck Accent
Check the body style on each listing; some kits are specific to one body style.
Installation tips: Wheel Well Accent Trim
- Unpack all 4 pieces and match each one to its position on the vehicle, using the product photos, before fitting any of them.
- Each piece mounts with 3M automotive-grade acrylic foam tape, so clean and dry the mounting surface first; the tape needs paint or trim free of dirt and wax.
- Align the piece and press it firmly into place directly over the existing surface, working along its full length so the tape bonds evenly.
- Seat the black rubber gasket edging evenly along the wheel opening as you press the trim on.
- Fit one piece at a time and compare each with the product photos and the pieces already in place.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: WQ11150 Wheel Well Accent Trim
Which vehicle does WQ11150 fit?
The 2011-2020 Toyota Sienna 4-door minivan.
How many pieces?
Four, with black rubber gasket edging.
How wide is it?
No width is listed; check the photos.
What is it made of?
Polished 26 gauge 304 stainless steel, made in the USA.
