Product Description
Toyota Sienna 2011-2020 Rocker Strip, 1.25" x 53.75", Two Pieces (TH11151)
TH11151 is a two-piece polished stainless steel strip for the rocker of a 2011 through 2020 Toyota Sienna minivan. The listing gives a length as well as a width: each strip is described as 1.25" wide by 53.75" long, which makes it easy to check against your own van. QAA's note says it "Installs below the door," so it rides on the rocker panel, not on the door skins.
Measure before you buy
Because the data gives both dimensions, you can check the fit at home. Cut a strip of painter's tape 53.75" long and lay it on the flattest part of the rocker under the doors. Look at where each end lands, and make sure the band is at least 1.25" tall and smooth all the way across. Seams, textured plastic or a curve will show you where the strip would have trouble.
Two pieces to place
The record doesn't say where each of the two strips goes, so use the photos. The record does not say that directly, so confirm with the photos.
Versus the door kit TH11150
QAA also links TH11150, a four-piece lower kit that sits on the doors and tapers from 2.375" to 3.375". The two parts occupy different places according to their notes, so they are not substitutes for each other. You can choose the narrow rocker line alone or both. Compare the photos.
What it's made of
- Sienna steel: 26-gauge 304, polished, high grade
- Sienna trim built in America
- The two Sienna pieces mount using 3M automotive-grade acrylic foam tape
- Fits on the Sienna's rocker as it is
For the Sienna, QAA says the tape will hold for a lifetime and will not damage the minivan's paint below the doors.
Clean the rocker well
The rocker sits low and catches spray, grit and salt. Scrub it with soapy water and a soft brush, rinse, dry, then wipe the full 53.75" path with isopropyl alcohol. Any chipped paint should be touched up and fully cured first.
Running a long strip straight
Leave your painter's tape guide in place. With the liner on, set the strip against it and sight down the van from the front bumper. When it looks level, peel a short section of liner, anchor that end, and keep peeling and pressing as you go. Finish by pressing the whole length again.
Where the strips go
Measure from a fixed point, such as the front wheel opening, to the front end of the first strip, and use a matching measurement for the second.
After installing
Skip washing for about a day and avoid deep puddles while the tape sets. Tape also bonds best when the van and the strips are warm, so a mild afternoon or a heated garage is the right place to do this job.
Other Sienna parts QAA links
PP11150, PP11151, PP11152 pillars; WP11150, WP11151, WP11152 window packages; WS11150 sills; WQ11150 wheel well accents; DH11150; DS11150; RD11150; LB11150; and GC11150. Check each listing for its finish.
Care
Rinse the rockers after winter drives; clean with mild soap and a soft cloth.
Questions about the Sienna rocker set? Quality Automotive Trims, 877-752-3811, SKU TH11151, UPC 691821531783.
TH11151 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | TH11151 |
| UPC | 691821531783 |
| Part type | Rocker Panel Trim, On the rocker |
| Pieces in kit | 2 |
| Material | Polished 26-gauge 304 stainless steel |
| Finish | Polished to a mirror shine |
| Width | 1.25" |
| Coverage / notes | 1.25" Width X 53.75" length; Installs below the door |
| Mounting | 3M automotive-grade acrylic foam tape; installs directly over the existing surface |
| Origin | Made in the USA |
| Fits | 2011-2020 Toyota Sienna |
Fitment: TH11151
| Vehicle | Years | Body style |
|---|---|---|
| Toyota Sienna | 2011-2020 | 4-door, Minivan |
Match the year, model, and body style in this table to your vehicle before ordering. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Other QAA trim cataloged for the 2011-2020 Toyota Sienna
- DH11150: 4-piece Door Handle Accent Trim
- DS11150: 2-piece Door Sill trim
- GC11150: 1-piece Gas Door Cover Trim
- LB11150: 1-piece License Plate Bar Accent
- PP11150: 4-piece Pillar Post Trim
- PP11151: 6-piece Pillar Post Trim
- PP11152: 8-piece Pillar Post Trim
- RD11150: 1-piece Rear Deck Accent
Check the body style on each listing; some kits are specific to one body style.
Installation tips: Rocker Panel Trim, On the rocker
- Unpack all 2 pieces and match each one to its position on the vehicle, using the product photos, before fitting any of them.
- Each piece mounts with 3M automotive-grade acrylic foam tape, so clean and dry the mounting surface first; the tape needs paint or trim free of dirt and wax.
- Align the piece and press it firmly into place directly over the existing surface, working along its full length so the tape bonds evenly.
- Fit one piece at a time and compare each with the product photos and the pieces already in place.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: TH11151 Rocker Panel Trim, On the rocker
How long is each TH11151 strip?
The record lists 1.25" width by 53.75" length.
Where does it install?
Below the door, on the rocker.
Can I use it with TH11150?
They go in different places per their notes, so yes, they are separate looks; check both sets of photos.
Which Sienna years fit?
2011 through 2020, 4-door minivan.
How do I check fit before ordering?
Lay a 53.75" strip of painter's tape on the rocker. Call 877-752-3811 for help.
