Product Description
Hyundai Genesis Coupe 2010 Stainless Door Sill Trim with Logo Cut Out, 2 Pieces (DS10348)
DS10348 is a pair of polished stainless door sill trims for the Hyundai Genesis coupe, listed for the 2010 model year. The catalog's one distinctive note is that the set comes "With Logo Cut Out." Each piece is 304 stainless steel at 26 gauge, made in the USA, and mounts with 3M automotive-grade acrylic foam tape.
What a door sill trim is
The door sill is the threshold you step across when you get into the car, the strip of body that's exposed when the door is open. A sill trim is a plate that sits on that surface. This two-piece set is listed for a two-door car.
The logo cut out
The note says only that the trim has a logo cut out. The catalog doesn't name the logo or show its size in text, so look at the product photos to see exactly what's cut into the steel. If you want to confirm what it looks like before ordering, call us.
Fitment: one model year
QAA's row reads Hyundai Genesis, 2010-2010, 2-door Coupe. That's a single model year. Check your records before ordering, because other years aren't covered by this listing. The Fitment tab shows it as entered.
Other trim for this coupe
Two related listings for the same Genesis coupe are cross-referenced:
- RB10348, a one-piece rear bumper trim accent.
- RD10348, a one-piece rear deck accent for the back of the car.
With the sills as well, they put polished steel at the Genesis's doors and rear. Their full details are on their own pages.
The steel
Type 304 stainless, 26 gauge, polished. The shine is the steel's own surface rather than a plated layer.
Mounting
On the 2010 Genesis coupe, both sill plates go over the existing surface without drilling. Per QAA, the tape will hold for a lifetime and won't damage the Genesis's surface.
Preparing the sills
Sills collect grit from shoes, so cleaning is the biggest part of the job. Vacuum the area, then wash it, rinse, and degrease thoroughly. Any old protectant or dressing on the sill has to come off, or the tape won't grip well. Let it dry completely.
Placing the plates
Open the door and hold a plate in position with the liner on. Check that the logo cut out sits where you want it and the ends line up with the sill. Mark both ends with painter's tape. Peel the liner, set it to the marks, and press firmly along the full length. Press again after a minute. Repeat with the second plate, and compare both with the doors open. The Installation tab has the full prep.
Give it time
Try not to step on the sills for the rest of the day so the tape can settle. Install in mild, dry weather.
Care
Wipe with mild soap and water and a soft towel. Skip abrasives.
Questions
Genesis owners can reach Quality Automotive Trims at 877-752-3811 about DS10348. The Genesis sill pair's UPC is under Specs.
DS10348 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | DS10348 |
| UPC | 691821410286 |
| Part type | Door Sill trim |
| Pieces in kit | 2 |
| Material | Polished 26-gauge 304 stainless steel |
| Finish | Polished to a mirror shine |
| Coverage / notes | With Logo Cut Out |
| Mounting | 3M automotive-grade acrylic foam tape; installs directly over the existing surface |
| Origin | Made in the USA |
| Fits | 2010 Hyundai Genesis |
Fitment: DS10348
| Vehicle | Years | Body style |
|---|---|---|
| Hyundai Genesis | 2010 | 2-door, Coupe |
Match the year, model, and body style in this table to your vehicle before ordering. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Other QAA trim cataloged for the 2010 Hyundai Genesis
Check the body style on each listing; some kits are specific to one body style.
Installation tips: Door Sill trim
- Unpack all 2 pieces and match each one to its position on the vehicle, using the product photos, before fitting any of them.
- Each piece mounts with 3M automotive-grade acrylic foam tape, so clean and dry the mounting surface first; the tape needs paint or trim free of dirt and wax.
- Align the piece and press it firmly into place directly over the existing surface, working along its full length so the tape bonds evenly.
- Fit one piece at a time and compare each with the product photos and the pieces already in place.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: DS10348 Door Sill trim
What does DS10348 fit?
The 2010 Hyundai Genesis 2-door coupe.
What logo is cut out?
The catalog says only that it has a logo cut out. See the photos or call 877-752-3811.
How many pieces?
Two door sill trims.
What is it made of?
Polished 304 stainless steel, 26 gauge, made in the USA.
Does it need drilling?
No. It installs directly over the existing surface with 3M automotive-grade acrylic foam tape.
How long does the tape hold?
QAA states the tape will hold for a lifetime without causing any damage to the surface of the vehicle.
