Product Description
Hyundai Genesis Coupe 2010 Rear Bumper Accent in Polished Stainless (RB10348)
RB10348 has one of the narrowest fitment records in the catalog: a single model year. QAA lists this one-piece rear bumper accent for the 2010 Hyundai Genesis 2-door coupe only. It is mirror-polished 304 stainless steel, made in the USA, and it attaches with 3M tape.
Only the 2010 coupe
The title reads "2010-2010," and the fitment record agrees: one year, one body. A Genesis sedan, or a coupe from any other year, is not on this record. Check your registration before ordering, and call if your car is close but not an exact match.
What the part is
A rear bumper accent is a polished strip that adheres to the rear bumper cover and brings brightwork to the back of the car. It is decorative and does not change the bumper underneath.
Matching coupe trim
Two other QAA kits are linked to the same 2010 coupe:
- RD10348, a one-piece rear deck accent
- DS10348, a two-piece door sill set with logo cut-out
The rear deck accent sits on the same end of the car, so it is the natural partner if you want the back of the coupe to carry a consistent finish.
Built from stainless
26-gauge 304 stainless, mirror polished, with no plating to lift. The shine is in the metal.
Tape mounting
The Genesis coupe bumper trim goes over the existing surface with 3M automotive-grade acrylic foam tape. QAA says it will hold for a lifetime without harming the Hyundai.
Clean surface, strong bond
Wash and dry the rear bumper, then wipe the mounting area with a cleaner that leaves no residue. Wax, polish, and plastic dressings all interfere with adhesion. If the paint is chipped where the accent will sit, repair it first.
Installing a single accent
On a dry, mild day, hold the strip in position with its liner still on and compare with the product photos. Step back and confirm it looks level and centered from behind the car; a piece of masking tape can mark the line. Peel the liner, place the accent, and press firmly from the center toward each end. Wait a few days before washing. The Installation tab has the full guide.
Centering tip
Measure the strip against fixed points on the Genesis bumper during the dry-fit. With only one piece, small offsets are easy to see.
Care
Hand wash with mild soap and dry with a soft towel. Avoid scouring pads and harsh compounds.
What the Genesis bumper gains
A coupe's rear view is a big part of its look. A single bright accent gives a finished detail without changing anything permanent.
A short production year makes trim scarce
Parts cataloged for one specific model year are easy to overlook when you search by a range of years. If you own the 2010 coupe and want a polished rear detail, this listing was made with your car in mind.
Part details
To confirm Genesis fitment for RB10348 (UPC 691821387274), call Quality Automotive Trims at 877-752-3811.
RB10348 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | RB10348 |
| UPC | 691821387274 |
| Part type | Rear Bumper Trim Accent |
| Pieces in kit | 1 |
| Material | Polished 26-gauge 304 stainless steel |
| Finish | Polished to a mirror shine |
| Mounting | 3M automotive-grade acrylic foam tape; installs directly over the existing surface |
| Origin | Made in the USA |
| Fits | 2010 Hyundai Genesis |
Fitment: RB10348
| Vehicle | Years | Body style |
|---|---|---|
| Hyundai Genesis | 2010 | 2-door, Coupe |
Check your vehicle against every column here: year range, model, and body style all have to match. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Other QAA trim cataloged for the 2010 Hyundai Genesis
Check the body style on each listing; some kits are specific to one body style.
Installation tips: Rear Bumper Trim Accent
- Unpack the piece and hold it in position to confirm the fit before mounting it.
- Each piece mounts with 3M automotive-grade acrylic foam tape, so clean and dry the mounting surface first; the tape needs paint or trim free of dirt and wax.
- Align the piece and press it firmly into place directly over the existing surface, working along its full length so the tape bonds evenly.
- Step back and check alignment before pressing along the full length of the piece.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: RB10348 Rear Bumper Trim Accent
What does RB10348 fit?
The 2-door Hyundai Genesis coupe, model year 2010 only.
Does it fit the Genesis sedan?
The sedan is not on this record.
How many pieces?
One.
What other trim is linked to this coupe?
RD10348 rear deck accent and DS10348 door sills.
How does it install?
With 3M automotive-grade acrylic foam tape over the existing surface.
