Product Description
Chevy Camaro 2010-2013 Coupe and Convertible Rear Bumper Trim, Stainless (RB50100)
RB50100 is a one-piece polished stainless trim for the rear bumper of the Chevrolet Camaro, 2010 through 2013. The fitment covers both the 2-door coupe and the 2-door convertible. It is made in the USA from 304 stainless steel and mounts with 3M tape over the existing bumper surface.
Coupe or convertible, same part
The data lists both body styles on one record, so whether your Camaro has a fixed roof or a soft top, this is the rear bumper trim QAA catalogs for it. The catalog does not separate the listing by trim level.
Model years
2010, 2011, 2012, and 2013. Camaros outside those years are not on this record.
Three linked pieces
QAA links a short, focused list to this Camaro:
- LB50100, a license bar above the plate with a logo cut-out
- MC50100, a two-piece mirror cover set
- WZ50100, a four-piece wheel well fender trim molding
The license bar is the obvious match for the bumper trim. Both sit at the back of the car, and pairing them gives the rear two trim elements; check the other listing for its finish.
The view from behind
The back of the car is the view most people see in traffic. A single bright line on the bumper is a restrained way to bring contrast without changing the shape of the car. Because the trim is one piece, alignment is the only thing to get right.
Material
26-gauge 304 stainless steel, mirror polished. The finish is the steel itself, not a plating, so nothing flakes.
Attachment
The Camaro bumper trim goes on over the existing surface with 3M automotive-grade acrylic foam tape. Per QAA, it will hold for a lifetime and won't mark the Chevrolet.
Before you peel
Wash and dry the bumper, then wipe the area with a residue-free cleaner. If your car carries a ceramic coating or paint protection film where the trim will sit, tape can struggle to grip, so a detailer can advise on clearing a small area. Repair any chips first.
Placing it
Dry-fit with the liner on. Measure from both ends to the bumper edges, adjust until they match, and mark with masking tape. If you are fitting the license bar too, install it first and center the bumper trim relative to it. Peel, press from the middle out, and let it sit a few days before washing. The Installation tab has details.
Care
Hand wash with mild soap; dry with a soft towel. Keep abrasive pads away.
Convertible owners
On a convertible, work with the top up and the car parked out of direct sun if possible, so the bumper surface stays at a mild, even temperature during the install. The same tape and steps apply to both body styles.
Why polished steel
There is no plated coat on this trim, so washing over the years does not wear through to a different color underneath. Check the license bar and mirror cover listings linked to this car for their finish.
Part details
SKU RB50100, UPC 691821433322. Questions about your Camaro? Call Quality Automotive Trims at 877-752-3811.
RB50100 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | RB50100 |
| UPC | 691821433322 |
| Part type | Rear Bumper Trim Accent |
| Pieces in kit | 1 |
| Material | Polished 26-gauge 304 stainless steel |
| Finish | Polished to a mirror shine |
| Mounting | 3M automotive-grade acrylic foam tape; installs directly over the existing surface |
| Origin | Made in the USA |
| Fits | 2010-2013 Chevrolet Camaro |
Fitment: RB50100
| Vehicle | Years | Body style |
|---|---|---|
| Chevrolet Camaro | 2010-2013 | 2-door, Coupe, Convertible |
Check your vehicle against every column here: year range, model, and body style all have to match. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Other QAA trim cataloged for the 2010-2013 Chevrolet Camaro
- MC50100: 2-piece Mirror Cover Set
- WZ50100: 4-piece Wheel Well Fender Trim Molding
- LB50100: 1-piece License Bar, Above plate accent Trim
Check the body style on each listing; some kits are specific to one body style.
Installation tips: Rear Bumper Trim Accent
- Unpack the piece and hold it in position to confirm the fit before mounting it.
- Each piece mounts with 3M automotive-grade acrylic foam tape, so clean and dry the mounting surface first; the tape needs paint or trim free of dirt and wax.
- Align the piece and press it firmly into place directly over the existing surface, working along its full length so the tape bonds evenly.
- Step back and check alignment before pressing along the full length of the piece.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: RB50100 Rear Bumper Trim Accent
Does RB50100 fit the Camaro convertible?
Yes. The fitment lists the 2-door coupe and the 2-door convertible, 2010 through 2013.
How many pieces?
One.
What pairs with it at the rear?
LB50100, a license bar above the plate with a logo cut-out.
Does the bumper cover come off for this?
No. It mounts with 3M automotive-grade acrylic foam tape over the existing surface.
What is it made of?
26-gauge 304 stainless steel with a mirror polish, made in the USA.
