Product Description
Chevrolet Camaro 2010-2013 License Bar with Logo Cut Out, Coupe and Convertible (LB50100)
LB50100 is a one-piece polished stainless license bar for the Chevrolet Camaro, model years 2010 through 2013. The fitment row covers the 2-door coupe and the 2-door convertible, so either body style is on the listing. The catalog note is With Logo Cut Out, meaning the bar has an opening that keeps the logo visible.
Specifications
- Part: License Bar, Above plate accent Trim, one piece
- Built in the USA of 26-gauge 304 stainless, polished
- Note: With Logo Cut Out
- Applied directly over the existing surface using 3M automotive-grade acrylic foam tape
- Width: not listed
On the Camaro coupe or convertible, QAA states this trim's tape holds for a lifetime without harming the vehicle's surface.
Before ordering
Check the year: 2010 to 2013, four model years. Check the logo: the cutout is shaped to frame it, so it should be in its original position. If it has been removed or changed, the opening won't line up with anything. Check the rest of the area: the catalog doesn't mention key access or a camera opening, so the product photos are your reference. If the photos and your Camaro don't match, call Quality Automotive Trims at 877-752-3811 and mention LB50100 before ordering.
Install
Choose a warm, dry day within the range on the Installation tab. Wash and dry the area, then wipe with rubbing alcohol, working around the logo's edges. Hold the bar in place with the liner on and center the logo in the opening. Look from behind the car at standing height; on a low car, kneel to check it's level, then stand to see it as others will. Mark both ends with painter's tape. Peel, align and press firmly along the full length and around the cutout. Press again after a minute. Close the trunk gently for the first day.
Convertible owners
The fitment row lists the convertible alongside the coupe, with no separate note for this bar. If you have a convertible, compare the product photos with your trunk area before ordering, and call if anything looks different.
Older paint check
A Camaro from these years may have chips from road debris, worn clear coat, or residue from a dealer badge near the plate. Tape bonds only as well as the surface below it. Inspect the area in good light, clean off any old adhesive, and fix flaking paint before you install. On older Camaro paint, a second alcohol wipe is worth the minute.
Three more Camaro parts
The sheet cross-lists MC50100, a two-piece mirror cover set; WZ50100, a four-piece wheel well fender trim molding; and RB50100, a one-piece rear bumper trim accent. All three carry the same coupe and convertible fitment. If you're building out the back of the car, RB50100 and this bar sit in the same area, so compare their photos together. Check each listing for its finish.
Care for the Camaro bar is simple: mild soap and water, then a soft towel, with no abrasives on the polish. The Fitment and Specs tabs show the vehicle row and UPC.
LB50100 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | LB50100 |
| UPC | 691821345298 |
| Part type | License Bar, Above plate accent Trim |
| Pieces in kit | 1 |
| Material | Polished 26-gauge 304 stainless steel |
| Finish | Polished to a mirror shine |
| Coverage / notes | With Logo Cut Out |
| Mounting | 3M automotive-grade acrylic foam tape; installs directly over the existing surface |
| Origin | Made in the USA |
| Fits | 2010-2013 Chevrolet Camaro |
Fitment: LB50100
| Vehicle | Years | Body style |
|---|---|---|
| Chevrolet Camaro | 2010-2013 | 2-door, Coupe, Convertible |
Fitment is listed exactly as QAA catalogs it. Confirm the body style as well as the year and model. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Other QAA trim cataloged for the 2010-2013 Chevrolet Camaro
- MC50100: 2-piece Mirror Cover Set
- WZ50100: 4-piece Wheel Well Fender Trim Molding
- RB50100: 1-piece Rear Bumper Trim Accent
Check the body style on each listing; some kits are specific to one body style.
Installation tips: License Bar, Above plate accent Trim
- Unpack the piece and hold it in position to confirm the fit before mounting it.
- Each piece mounts with 3M automotive-grade acrylic foam tape, so clean and dry the mounting surface first; the tape needs paint or trim free of dirt and wax.
- Align the piece and press it firmly into place directly over the existing surface, working along its full length so the tape bonds evenly.
- Step back and check alignment before pressing along the full length of the piece.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: LB50100 License Bar, Above plate accent Trim
Does LB50100 fit the Camaro convertible?
Yes. The fitment row lists the 2-door coupe and convertible, 2010-2013.
Does it cover the logo?
No. It has a logo cut out.
How wide is it?
No width is listed. See the photos or call 877-752-3811.
How does it attach?
3M automotive-grade acrylic foam tape, directly over the existing surface. QAA states the tape will hold for a lifetime without causing any damage to the surface of the vehicle.
How many pieces?
One.
