Product Description
Chevrolet Camaro 2010-2015 Coupe and Convertible Stainless Gas Door Trim (GC50100)
Coupe or convertible, the 2010-2015 Chevrolet Camaro is covered by GC50100. The single Fitment row lists the 2-door in both body styles across six model years. The Camaro trim is one piece of polished 304 stainless steel, 26 gauge, made in the USA. Attachment to the Camaro's fuel door is with 3M automotive-grade acrylic foam tape.
GC50100 is not a replacement cap or replacement part. The 2010-2015 Camaro must keep its own fuel door, which this trim decorates.
The Camaro list, and where body style matters
This sheet cross-lists a wide range of Camaro trim, and some of it is restricted in ways this gas door piece isn't:
- WP50100, an eight-piece window trim package described as the full package, with upper trim, pillar posts and window sills; and WP50102, a six-piece package with upper trim, window sills and rear surround but no pillars. Both are tagged for the coupe only.
- SG50100, a one-piece front grille accent, tagged "SS Model only."
- PP50100, a two-piece pillar post set, and SV50100, a six-piece side vent trim in a "Shark Fin" style, both tagged coupe and convertible.
- Two four-piece "SS" emblem sets: SGR50100, 3" tall, and SGR50101, 2" tall. SGR50100's note also mentions a "SIGNATURE" decal, which doesn't match an SS emblem; we've flagged it, so ask before ordering.
WS50100, RI50100, AT50100 and MI50100 are also cross-listed, by number only.
If you drive a convertible, notice that both window packages are listed for the coupe. The gas door trim, pillar set and side vents are the pieces listed for both.
A first project
With window packages, vents, emblems and a grille piece on the list, it's easy to plan a lot at once. The gas door trim is a good place to begin: a single flat piece with nothing to pair, done in minutes, and a chance to see the polished finish against your Camaro's paint before ordering the larger kits.
Attaching it
GC50100 installs directly over the existing surface, with no drilling. QAA states the tape will hold for a lifetime without causing any damage to the surface of the vehicle. Tape holds to paint, so the paint must be in good shape: repair peeling or cloudy clear coat, chips at the edges, and bubbles before installing, and confirm the door closes flush.
Fitting
Wash the door with soap and water, then rinse, dry, and degrease. Holding the trim with its liner still on, set it on the closed door and move it until the margin of paint around it is even. Mark the spot with painter's tape. Peel, place, and press hard over the whole face, then repeat a minute later. Open the door slowly to confirm it clears. The Installation tab has the full steps.
Finish and care
Polished 304 stainless is bright and reflective, and the 26 gauge sheet stays thin. Install on a mild, dry day and keep it dry overnight. Clean with mild soap and a soft cloth, and wipe off fuel drips.
For Camaro parts questions, phone Quality Automotive Trims at 877-752-3811 and give GC50100; the UPC is under Specs.
GC50100 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | GC50100 |
| UPC | 691821490486 |
| Part type | Gas Door Cover Trim |
| Pieces in kit | 1 |
| Material | Polished 26-gauge 304 stainless steel |
| Finish | Polished to a mirror shine |
| Mounting | 3M automotive-grade acrylic foam tape; installs directly over the existing surface |
| Origin | Made in the USA |
| Fits | 2010-2015 Chevrolet Camaro |
| Not included | This is NOT a replacement gas cap or door; your existing gas door is required |
Fitment: GC50100
| Vehicle | Years | Body style |
|---|---|---|
| Chevrolet Camaro | 2010-2015 | 2-door, Coupe, Convertible |
Fitment is listed exactly as QAA catalogs it. Confirm the body style as well as the year and model. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Other QAA trim cataloged for the 2010-2015 Chevrolet Camaro
- PP50100: 2-piece Pillar Post Trim
- SV50100: 6-piece Side Vent Trim
- SGR50100: 4-piece "SS" Emblem
- SGR50101: 4-piece "SS" Emblem
- SG50100: 1-piece Front Grille Accent Trim
- WP50100: 8-piece Window Trim Package
- WP50102: 6-piece Window Trim Package
- WS50100: 2-piece Window Sill Trim Set
Check the body style on each listing; some kits are specific to one body style.
Installation tips: Gas Door Cover Trim
- Confirm your vehicle still has its original gas door. This trim mounts over it and does not replace it.
- Unpack the piece and hold it in position to confirm the fit before mounting it.
- Each piece mounts with 3M automotive-grade acrylic foam tape, so clean and dry the mounting surface first; the tape needs paint or trim free of dirt and wax.
- Align the piece and press it firmly into place directly over the existing surface, working along its full length so the tape bonds evenly.
- Step back and check alignment before pressing along the full length of the piece.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: GC50100 Gas Door Cover Trim
Is GC50100 a replacement gas door?
No. It is not a replacement cap or replacement part. You must have the existing gas door to install this piece.
Does it fit the Camaro convertible?
Yes. The fitment lists the 2010-2015 Chevrolet Camaro 2-door in coupe and convertible body styles.
What is it made of?
Polished 304 stainless steel, 26 gauge, made in the USA.
Does it need drilling?
No. It installs directly over the existing surface with 3M automotive-grade acrylic foam tape.
How long does the tape hold?
QAA states the tape will hold for a lifetime without causing any damage to the surface of the vehicle.
Do the window trim packages fit the convertible?
WP50100 and WP50102 are tagged for the coupe only. Call 877-752-3811 with questions.
