Product Description
Chevy Equinox 2018-2024 Rear Bumper Trim, Polished 304 Stainless (RB58160)
RB58160 is a single piece of mirror-polished stainless trim for the rear bumper of the Chevrolet Equinox 4-door SUV, model years 2018 through 2024. It is made in the USA from 304 stainless steel and mounts over the existing bumper surface with 3M tape.
Seven years covered
2018, 2019, 2020, 2021, 2022, 2023, and 2024, all on one record for the 4-door SUV.
A busy rear end
This Equinox has several QAA pieces that cluster around the liftgate:
- RD58160, a rear deck accent listed at two inches wide
- LB58160, a two-piece license bar above the plate
- LP58160, a license plate bezel
- RW58160, a two-piece rear window trim
- GC58160, a gas door cover
Combined with this bumper trim, that is up to six polished items on the back of the SUV, so laying them out together before installing anything is worth the time.
Rocker trim above the cladding
TH58160 is an eight-piece upper kit, one inch wide, that spans from the bottom of the cladding upward. That note tells you the kit is designed around the lower cladding rather than replacing it.
Wheel wells, sills, and pillars
WQ58160 and WQ58161 are both four-piece wheel well accents at 0.875 inches, and the catalog data does not state how they differ. Compare the photos or call. WS58160 is a four-piece sill set, 0.5 inches, covering the face of the sills only. PP58160 and PP58161 are four- and six-piece pillar kits.
Material
26-gauge 304 stainless steel, polished to a mirror. Because nothing is plated, there is no finish to peel.
Mounting
The Equinox bumper trim attaches with 3M automotive-grade acrylic foam tape. Per QAA, that tape will hold for a lifetime without harming the Chevrolet.
Prep
Wash the bumper, dry it, and wipe the mounting area with a residue-free cleaner. Rear bumpers on SUVs collect scuffs from cargo, so repair any chips where the trim will sit.
Order of installation
Start high and work down: rear window trim, then the deck accent, then the license bar and bezel, and finally this bumper trim. Each piece gives you a reference line for the next. Dry-fit the bumper trim with the liner on, measure from both ends, and mark the line with masking tape. On a dry, mild day, peel and press from the center out. Wait a few days to wash. See the Installation tab.
Care
Mild soap and a soft towel. No abrasive pads or rubbing compounds.
Cargo-friendly placement
If you load heavy items over the rear bumper, look at where bags and boxes tend to drag before you mark the line. Keeping grit off the polished surface is the easiest way to avoid scratches. A rinse after hauling dusty loads helps the trim stay bright.
Why stainless
The polish is in the steel rather than a plated layer, so check each linked Equinox listing for its finish before planning the rear.
Part details
SKU RB58160, UPC 691821334704. For help choosing between the two wheel well kits, call Quality Automotive Trims at 877-752-3811.
RB58160 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | RB58160 |
| UPC | 691821334704 |
| Part type | Rear Bumper Trim Accent |
| Pieces in kit | 1 |
| Material | Polished 26-gauge 304 stainless steel |
| Finish | Polished to a mirror shine |
| Mounting | 3M automotive-grade acrylic foam tape; installs directly over the existing surface |
| Origin | Made in the USA |
| Fits | 2018-2024 Chevrolet Equinox |
Fitment: RB58160
| Vehicle | Years | Body style |
|---|---|---|
| Chevrolet Equinox | 2018-2024 | 4-door, SUV |
Match the year, model, and body style in this table to your vehicle before ordering. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Other QAA trim cataloged for the 2018-2024 Chevrolet Equinox
- PP58160: 4-piece Pillar Post Trim
- PP58161: 6-piece Pillar Post Trim
- RW58160: 2-piece Rear Window Trim
- TH58160: 8-piece Rocker Panel Trim, Upper Kit
- LB58160: 2-piece License Plate Bar Accent
- GC58160: 1-piece Gas Door Cover Trim
- WS58160: 4-piece Window Sill Trim Set
- RD58160: 1-piece Rear Deck Accent
Check the body style on each listing; some kits are specific to one body style.
Installation tips: Rear Bumper Trim Accent
- Unpack the piece and hold it in position to confirm the fit before mounting it.
- Each piece mounts with 3M automotive-grade acrylic foam tape, so clean and dry the mounting surface first; the tape needs paint or trim free of dirt and wax.
- Align the piece and press it firmly into place directly over the existing surface, working along its full length so the tape bonds evenly.
- Step back and check alignment before pressing along the full length of the piece.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: RB58160 Rear Bumper Trim Accent
Which Equinox does RB58160 fit?
The Chevrolet Equinox 4-door SUV, 2018 through 2024.
How many pieces?
One.
What rear trim pairs with it?
RD58160 rear deck accent, LB58160 license bar, LP58160 license plate bezel, RW58160 rear window trim, and GC58160 gas door cover.
What is the difference between WQ58160 and WQ58161?
The catalog data does not say. Compare photos or call 877-752-3811.
How does it install?
With 3M automotive-grade acrylic foam tape over the existing surface.
