Product Description
Honda Pilot 2019-2022 Stainless Front Bumper Accent, 1 Piece, 0.5" Wide (FB16260)
FB16260 is a slim one: a single polished stainless front bumper accent listed at 0.5" wide for the Honda Pilot 4-door SUV, 2019 through 2022. It's made in the USA from 304 stainless steel at 26 gauge and mounts with 3M automotive-grade acrylic foam tape.
A thin line of steel
At 0.5" wide, this accent is a narrow polished line rather than a broad panel. No length is listed, and the catalog doesn't describe its exact position on the bumper. The product photos show where it goes; compare them with the front of your Pilot, and call if you want to confirm.
Fitment
Honda Pilot, 2019-2022, 4-door SUV, on one row. The Fitment tab shows it.
Three front-end pieces to consider
Two related Pilot listings also sit at the front of the vehicle:
- SGT16260, a one-piece accent that installs below the front grille onto the bumper.
- SGL16260, a one-piece lower grille accent.
Both are filed as front grille/bumper accent trim. Because all three are front-end accents, compare their photos side by side to decide which look you want, or whether you want more than one. The catalog doesn't say how the three relate to each other on the bumper, so if you're planning to combine them, call us first.
Steel
Polished 304 stainless, 26 gauge. The bright face is the steel itself.
Mounting
On the 2019-2022 Pilot, the bumper accent fits over the existing surface without drilling. According to QAA, the tape will hold for a lifetime and leave the Pilot's surface unharmed.
Prep for a narrow piece
A narrow strip has less tape area, so a clean surface matters even more. Wash the bumper, rinse, and degrease the mounting area thoroughly, repeating until a clean cloth stays clean. Remove any spray wax or sealant. Check for chips. Let it dry fully.
Keeping it straight
Thin lines show any wobble, so take care here. Mark the intended path with a few short strips of painter's tape along the bumper before peeling anything. With the liner on, check the accent against the marks from in front of the SUV. Then peel, set one end, and work along the length, pressing firmly as you go. Press the whole piece again after a minute. The Installation tab has full prep.
Why the bumper
A thin polished line on the bumper gives the Pilot's front a crisp detail without changing the bumper.
Before ordering
Confirm a 2019-2022 Pilot, look at the photos, and decide whether you also want SGT16260 or SGL16260.
A second pair of eyes
For a narrow accent, having someone stand in front of the SUV while you hold the piece makes centering much easier. They can tell you which way to nudge it.
Conditions
Mild, dry day, out of the sun. Keep it dry overnight.
Care
Wash it with mild soap and a soft cloth.
Questions
For the Pilot bumper accent, call 877-752-3811 and quote FB16260. For the Pilot bumper accent, Specs shows the UPC.
FB16260 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | FB16260 |
| UPC | 691821421046 |
| Part type | Front Bumper Trim |
| Pieces in kit | 1 |
| Material | Polished 26-gauge 304 stainless steel |
| Finish | Polished to a mirror shine |
| Width | 0.5" |
| Mounting | 3M automotive-grade acrylic foam tape; installs directly over the existing surface |
| Origin | Made in the USA |
| Fits | 2019-2022 Honda Pilot |
Fitment: FB16260
| Vehicle | Years | Body style |
|---|---|---|
| Honda Pilot | 2019-2022 | 4-door, SUV |
Fitment is listed exactly as QAA catalogs it. Confirm the body style as well as the year and model. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Other QAA trim cataloged for the 2019-2022 Honda Pilot
Check the body style on each listing; some kits are specific to one body style.
Installation tips: Front Bumper Trim
- Unpack the piece and hold it in position to confirm the fit before mounting it.
- Each piece mounts with 3M automotive-grade acrylic foam tape, so clean and dry the mounting surface first; the tape needs paint or trim free of dirt and wax.
- Align the piece and press it firmly into place directly over the existing surface, working along its full length so the tape bonds evenly.
- Step back and check alignment before pressing along the full length of the piece.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: FB16260 Front Bumper Trim
What does FB16260 fit?
The 2019-2022 Honda Pilot 4-door SUV.
How wide is it?
The catalog lists 0.5" width.
How many pieces?
One front bumper accent.
What is it made of?
Polished 304 stainless steel, 26 gauge, made in the USA.
Does it need drilling?
No. It installs directly over the existing surface with 3M automotive-grade acrylic foam tape.
How long does the tape hold?
QAA states the tape will hold for a lifetime without causing any damage to the surface of the vehicle.
