Product Description
Honda Pilot 2016-2022 Polished Stainless License Bar, 0.75" Wide (LB16260)
Unlike many of QAA's license bars, LB16260 comes with a measurement: 0.75" wide. That figure tells you how tall the polished stainless strip will look above your Pilot's plate, and it's the detail buyers ask about first. The part fits the Pilot 4-door SUV, model years 2016 through 2022, which is seven years on a single fitment row.
Specs at a glance
One piece. Cataloged as a License Plate Bar Accent. Material is 26-gauge 304 stainless steel with a mirror polish, made in the USA. Width 0.75". Mounting is 3M automotive-grade acrylic foam tape, installed directly over the existing surface, with no drilling. QAA states the tape will hold for a lifetime without causing any damage to the surface of the vehicle. The sheet has no note about key access or cutouts, so check the photos against your liftgate.
Not to be confused with RD16260
The Pilot list includes RD16260, a one-piece part cataloged as a Rear Deck Accent, and it is also listed at 0.75". Same width, same vehicle, different part type and part number. The catalog doesn't describe where RD16260 sits relative to this bar, so compare the two listings' photos before you choose one or both. If you're unsure which you want, call Quality Automotive Trims at 877-752-3811 and mention LB16260.
About the plate area
LP16260, the license plate bezel for this Pilot, is noted as including access for a rear backup camera. This bar's own listing has no such note. Look at where the camera sits on your liftgate and compare it with the product photos for LB16260, so you know the bar and the camera won't compete for the same space. When in doubt, a quick phone call settles it.
Installing
Clean the surface with soap and water and dry it. Follow with rubbing alcohol and let it flash off. Dry-fit with the liner on and look from behind the vehicle to set it level and centered. Mark the ends with painter's tape, peel, and press firmly along the full length. Avoid slamming the liftgate for the first day. The Installation tab lists the temperature range.
What 0.75" looks like
Before ordering, lay a ruler or tape measure flat against the liftgate just above the plate and look at a 0.75" band from where someone behind you would stand. That gives you a fair preview of the bar's height. The length isn't stated on the sheet, so the photos remain the guide for how far it runs from side to side. If you want something more noticeable, compare it against the other rear parts on the list.
More for the Pilot
Ten other parts are cross-listed. Pillar post kits PP16260, PP16261, PP16262 and PP16263 run four, six, eight and ten pieces; the four-piece notes Includes top crease and the ten-piece notes Includes Front Pillar behind the mirror. TH16260 is a four-piece lower rocker kit at 1.25". GC16260, WQ16260 and TP16260 are named by number only here. Check each listing's photos for its finish.
LB16260 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | LB16260 |
| UPC | 691821522385 |
| Part type | License Plate Bar Accent |
| Pieces in kit | 1 |
| Material | Polished 26-gauge 304 stainless steel |
| Finish | Polished to a mirror shine |
| Width | 0.75" |
| Mounting | 3M automotive-grade acrylic foam tape; installs directly over the existing surface |
| Origin | Made in the USA |
| Fits | 2016-2022 Honda Pilot |
Fitment: LB16260
| Vehicle | Years | Body style |
|---|---|---|
| Honda Pilot | 2016-2022 | 4-door, SUV |
Fitment is listed exactly as QAA catalogs it. Confirm the body style as well as the year and model. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Other QAA trim cataloged for the 2016-2022 Honda Pilot
- PP16260: 4-piece Pillar Post Trim
- PP16261: 6-piece Pillar Post Trim
- PP16262: 8-piece Pillar Post Trim
- PP16263: 10-piece Pillar Post Trim
- TH16260: 4-piece Rocker Panel Trim, Lower Kit
- RD16260: 1-piece Rear Deck Accent
- LP16260: 1-piece License Plate Bezel
- GC16260: 1-piece Gas Door Cover Trim
Check the body style on each listing; some kits are specific to one body style.
Installation tips: License Plate Bar Accent
- Unpack the piece and hold it in position to confirm the fit before mounting it.
- Each piece mounts with 3M automotive-grade acrylic foam tape, so clean and dry the mounting surface first; the tape needs paint or trim free of dirt and wax.
- Align the piece and press it firmly into place directly over the existing surface, working along its full length so the tape bonds evenly.
- Step back and check alignment before pressing along the full length of the piece.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: LB16260 License Plate Bar Accent
How wide is LB16260?
0.75".
Which Pilot years does it fit?
2016 through 2022, 4-door SUV.
Does it work around the backup camera?
This listing has no camera note. Compare the photos to your liftgate or call 877-752-3811.
How does it attach?
3M automotive-grade acrylic foam tape, directly over the existing surface. QAA states the tape will hold for a lifetime without causing any damage to the surface of the vehicle.
How is it different from RD16260?
RD16260 is a different part type at the same 0.75" width. The catalog doesn't describe their positions, so compare the photos.
