Product Description
400HP Polished Stainless Emblems, 2-Piece Universal Decal, ~3.25" x .5" (SGR11003)
SGR11003 is listed as a pair of polished stainless steel "400HP" emblems, universal, fitting all vehicles. The size note gives each as approximately 3.25" x .5", a long, slim badge. As with several emblems in this group, the listing's included-items line doesn't match that design or count.
Title versus contents
Our product record names the design 400HP, two pieces. A second note reads Number "4," and the "What's included in the box?" line describes QAA's 1 piece stainless steel Number "4," approximately 3.25"x2.25," SGR#4. That line matches the number four listing. We won't decide which is right; check the photos and call Quality Automotive Trims at 877-752-3811 before you order.
A slim badge
At about 3.25" long and .5" tall, a 400HP badge is narrow. Small text at that height reads best up close, on a fender, a tailgate corner or another smooth panel people see from close by. Test it with a paper strip cut to size.
Made from
The two "4" emblems are made in the USA from polished 26 gauge 304 stainless steel with a mirror shine.
Held on with
Each emblem, about 3.25" by .5", goes on over the existing surface with 3M automotive-grade acrylic foam tape. QAA says that tape will hold for a lifetime without damaging the surface.
Two badges
The count is two, so you can use them together or apart. The listing doesn't say whether they are identical or mirrored.
Thin parts need a flat spot
A narrow strip of steel needs a smooth, flat area along its whole length. Avoid seams, ridges and curves; if any part of the badge lifts, the tape loses contact there.
Clean thoroughly
Wash, dry, then wipe with isopropyl alcohol. On a slim badge, even a little residual wax at one end can let it lift.
Line it up
Use a strip of painter's tape as a straight edge parallel to a body line. A long, thin badge shows any tilt, so check from a few steps back.
Applying
Peel, place along your guide, and press firmly from the center to each end. Warmth helps the bond; skip washing for a day.
Wanting a number four?
SGR#4 is QAA's separate number four emblem. If that's what you're after, order it directly.
Linked emblems
This listing links to QAA's digit emblems and to other universal designs such as SGR11004 20", SGR11009 Football Helmet and SGR11011 United States. Check each listing's notes; several carry mismatches like this one.
Care
Clean the SGR11003 emblems with mild soap and a soft cloth; a non-abrasive polish handles haze.
Is a badge like this for you?
A 400HP badge makes a bold statement. The listing doesn't say anything about the vehicle it belongs on, and that's up to you; it's a universal emblem. If you'd like a second opinion on placement or size, call us about the spot you have in mind and we'll tell you plainly. We'd rather you love the result than wonder about it.
Removing later
The listing doesn't describe removal, so choose the spot with care.
SGR11003, the two-piece universal emblem set, carries UPC 691821595655; call 877-752-3811 with questions.
SGR11003 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | SGR11003 |
| UPC | 691821595655 |
| Part type | Graphic/Logo/Emblem |
| Pieces in kit | 2 |
| Material | Polished 26-gauge 304 stainless steel |
| Finish | Polished to a mirror shine |
| Coverage / notes | Universal Decal, each emblem is approximately 3.25"x .5"; Number "4" |
| Mounting | 3M automotive-grade acrylic foam tape; installs directly over the existing surface |
| Origin | Made in the USA |
| Fits | Universal Decal |
Fitment: SGR11003
| Vehicle | Years | Body style |
|---|---|---|
| Universal Decal | Fits ALL |
Match the year, model, and body style in this table to your vehicle before ordering. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Other QAA trim cataloged for the Universal Decal
- SGR45370: 2-piece "500 Limited" decal
- SGR#0: 1-piece Number "0"
- SGR#1: 1-piece Number "1"
- SGR#2: 1-piece Number "2"
- SGR#3: 1-piece Number "3"
- SGR#4: 1-piece Number "4"
- SGR11001: 2-piece Trucker Girl
- SGR11002: 2-piece Texas
Check the body style on each listing; some kits are specific to one body style.
Installation tips: Graphic/Logo/Emblem
- Unpack all 2 pieces and match each one to its position on the vehicle, using the product photos, before fitting any of them.
- Each piece mounts with 3M automotive-grade acrylic foam tape, so clean and dry the mounting surface first; the tape needs paint or trim free of dirt and wax.
- Align the piece and press it firmly into place directly over the existing surface, working along its full length so the tape bonds evenly.
- Fit one piece at a time and compare each with the product photos and the pieces already in place.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: SGR11003 Graphic/Logo/Emblem
Is SGR11003 a 400HP badge or a number four?
Our record says 400HP, two pieces; the included-items line names a number four (SGR#4). Call 877-752-3811 to confirm.
What size are the badges?
Approximately 3.25" x .5" each.
Will it fit my vehicle?
It's listed as universal, fits all. Use a smooth, flat area.
How many pieces?
Two.
What material?
Polished 26 gauge 304 stainless steel, made in the USA.
